Hilti Nuron C 8-22 Bedienungsanleitung

C 6-22

C 8-22 English 1

Français 12

Español 23

Português 35

C 6-22

C 8-22

en Original operating instructions . . . . . . . . . . . . . . . . . . . . . . . . . . 1

fr Moded'emploioriginal ............................... 12

es Manual de instrucciones original . . . . . . . . . . . . . . . . . . . . . . . 23

pt Manual de instruções original . . . . . . . . . . . . . . . . . . . . . . . . . . 35

*2275225* 2275225 English 1

Original operating instructions

1 Information about the operating instructions

1.1 About these operating instructions

• Read these operating instructions before the product is used or operated

for the first time. This is a prerequisite for safe, trouble-free handling and

use of the product.

• Observe the safety instructions and warnings in these operating instruc-

tions and on the product.

• Always keep the operating instructions with the product and make sure

that the product is accompanied by these operating instructions only,

when the product is given to other persons.

1.2 Explanation of symbols

1.2.1 Warnings

Warnings alert persons to hazards that occur when handling or using the

product. The following signal words are used:

DANGER

DANGER !

▶Draws attention to imminent danger that will lead to serious personal

injury or fatality.

WARNING

WARNING !

▶Draws attention to a potential threat of danger that can lead to serious

injury or fatality.

CAUTION

CAUTION !

▶Draws attention to a potentially dangerous situation that could lead to

personal injury or damage to the equipment or other property.

1.2.2 Symbols in the operating instructions

The following symbols are used in these operating instructions:

Comply with the operating instructions

Instructions for use and other useful information

Dealing with recyclable materials

Do not dispose of electric equipment and batteries as household

waste

Hilti Liion battery

2 English 2275225 *2275225*

Hilti charger

1.2.3 Symbols in illustrations

The following symbols are used in illustrations:

These numbers refer to the illustrations at the beginning of these

operating instructions.

The numbering reflects the sequence of operations shown in the

illustrations and may deviate from the steps described in the text.

Item reference numbers are used in the overview illustration and

refer to the numbers used in the key in the product overview sec-

tion.

These characters are intended to specifically draw your attention to

certain points when handling the product.

1.3 Product-dependent symbols

1.3.1 Symbols on the product

The following symbols can be used on the product:

The product supports near-field communication (NFC) technology

compatible with iOS and Android platforms.

Double insulated

For indoor use only

Direct current (DC)

Alternating current

If applied on the product, the product has been certified by this cer-

tification body for the US and Canadian markets according to the

applicable standards.

If applied on the product, the product has been certified by this cer-

tification body for the US and Canadian markets according to the

applicable standards.

1.4 Product information

products are designed for professional users and only trained,

authorized personnel are permitted to operate, service and maintain the

products. This personnel must be specifically informed about the possible

hazards. The product and its ancillary equipment can present hazards if

used incorrectly by untrained personnel or if used not in accordance with

the intended use.

The type designation and serial number are printed on the rating plate.

*2275225* 2275225 English 3

▶Write down the serial number in the table below. You will be required to

state the product details when contacting Hilti Service or your local Hilti

organization to inquire about the product.

Product information

Charger C 622 | C 822

Generation 01

Serial no.

2 Safety

2.1 General safety instructions

WARNING Study all safety instructions and other instructions, im-

ages and technical data with which this power tool is provided. Failure

to observe the instructions below can result in electric shock, fire and/or se-

rious injury.

Keep all safety instructions and instructions for future reference.

▶Persons (including children) with reduced physical, sensory or mental

abilities or lack of experience and knowledge are not permitted to use

this product.

▶Do not allow children to play with the product.

▶Install the charger in such a way that a battery inserted into it cannot fall

out.

2.2 Battery charger use and care

▶To avoid injury, use the charger only to charge Hilti Li-ion batteries

approved for use with this charger.

▶The location at which the charger is used should be clean, cool, dry and

protected from frost.

▶The charger must be able to emit heat while in operation. The air vents

must therefore remain unobstructed. Do not operate the charger inside

a closed container.

▶Maintain the product carefully. Make sure that no parts are broken or

damaged in such a way that the product no longer functions correctly. If

parts are damaged or broken, have the product repaired prior to further

use.

▶Use chargers and the corresponding batteries in accordance with these

instructions and as is specified for this particular model. Use of chargers

for applications different from those intended could result in hazardous

situations.

▶Recharge the batteries only with the chargers specified by the manufac-

turer. A charger that is suitable for a certain type of battery may present

a risk of fire when used with other types of battery.

4 English 2275225 *2275225*

▶When not in use, keep the battery and the charger away from paper

clips, coins, keys, nails, screws or other small metal objects that could

cause a short circuit at the battery terminals or the charging contacts.

A short circuit between the battery terminals or charging contacts may

cause injuries (burns) and result in fire.

▶Do not store the battery on the charger. Always remove the battery from

the charger when the charging operation has completed.

2.3 Careful handling and use of batteries

▶Comply with the following safety instructions for the safe handling

and use of Li-ion batteries. Failure to comply can lead to skin irritation,

severe corrosive injury, chemical burns, fire and/or explosion.

▶Use only batteries that are in perfect working order.

▶Treat batteries with care in order to avoid damage and prevent leakage

of fluids that are extremely harmful to health!

▶Do not under any circumstances modify or tamper with batteries!

▶Do not disassemble, crush or incinerate batteries and do not subject

them to temperatures over 80 °C (176 °F).

▶Never use or charge a battery that has suffered an impact or been

damaged in any other way. Check your batteries regularly for signs of

damage.

▶Never use recycled or repaired batteries.

▶Never use the battery or a battery-operated power tool as a striking tool.

▶Never expose batteries to the direct rays of the sun, elevated tempera-

ture, sparking, or open flame. This can lead to explosions.

▶Do not touch the battery poles with your fingers, tools, jewelry, or other

electrically conductive objects. This can damage the battery and also

cause material damage and personal injury.

▶Keep batteries away from rain, moisture and liquids. Penetrating moisture

can cause short circuits, electric shock, burns, fire and explosions.

▶Use only chargers and power tools approved for the specific battery

type. Read and follow the relevant operating instructions.

▶Do not use or store the battery in explosive environments.

*2275225* 2275225 English 5

▶If the battery is too hot to touch, it may be defective. Put the battery

in a place where it is clearly visible and where there is no risk of fire,

at an adequate distance from flammable materials. Allow the battery

to cool down. If it is still too hot to touch after an hour, the battery is

faulty. Consult Hilti Service or read the document entitled "Instructions

on safety and use for Hilti Li-ion batteries".

Observe the special guidelines applicable to the transport, storage

and use of lithium-ion batteries.

Read the instructions on safety and use of Hilti Li-ion batteries

that you can access by scanning the QR code at the end of these

operating instructions.

3 Description

3.1 Product overview 1

@Battery

;Battery status indicator

=Battery release button

%Charger operating status indi-

cator

&Holes for wall-mounting

(Air exit

)Air intake

+Battery interface

3.2 Intended use

The product described is a portable battery charger for Hilti Li-ion batteries

with a rated voltage of 21.6 volts. It is designed to be connected to power

outlets providing an AC (alternating current) voltage of 100 to 127 volts or

220 to 240 volts (depending on country-specific version).

The charger can be set on a flat surface or mounted on the wall.

• A list of the Hilti Li-ion batteries approved for use with this product can

be found at the end of these operating instructions.

• Not all batteries are available in all markets.

3.3 Operating status indicator of the charger

Status Meaning

LED shows green. Charger is ready for use.

LED doesn’t light. Charger is not ready for use.

3.4 Status indicators of the Li-ion battery during charging

When a Hilti Nuron Li-ion battery is connected to a Hilti charger, the status

indicator of the battery shows the state of charge and also fault messages,

if applicable.

6 English 2275225 *2275225*

Status Meaning

One (1) LED slow-flashes green The battery is being charged, state

of charge: ≤ 20 %

One (1) LED shows green, one (1)

LED slow-flashes green

The battery is being charged, state

of charge: 21 % to 40 %

Two (2) LEDs show green, one (1)

LED slow-flashes green

The battery is being charged, state

of charge: 41 % to 60 %

Three (3) LEDs show green, one (1)

LED slow-flashes green

The battery is being charged, state

of charge: 61 % to 80 %

Four (4) LEDs show green The battery is being charged, state

of charge: ≥ 80 %

No LED showing The battery is fully charged, charg-

ing has ended.

One (1) LED quick-flashes yellow,

then one or more LEDs show green

Charging interrupted. The battery

might be outside the permissible

temperature range.

Charging resumes automatically

as soon as the applicable parame-

ters return to specification. If neces-

sary, bring the battery to the recom-

mended charging temperature.

One (1) LED quick-flashes red The Li-ion battery is locked and

cannot be used. Consult Hilti Ser-

vice.

3.5 Indicators showing the state of health of the Li-ion battery

Hilti recommends checking the state of health of the Li-ion battery every

time before charging.

To check the battery's state of health, press the release button of the battery

and hold it down for longer than three seconds. The system does not detect

a potential malfunction of the battery due to misuse, for example battery

dropped or pierced, external heat damage, etc.

Status Meaning

All LEDs show in sequence, fol-

lowed by one (1) LED showing con-

stantly green.

The battery can remain in use.

All LEDs show in sequence, fol-

lowed by one (1) LED quick-flashing

yellow.

The check to ascertain the battery's

state of health did not complete.

Repeat the procedure, or consult

Hilti Service.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Hilti Akkuladegerät Handbücher

Hilti

Hilti C 4/12-50 Bedienungsanleitung

Hilti

Hilti C 7/24 Bedienungsanleitung

Hilti

Hilti C 4/12-50 Bedienungsanleitung

Hilti

Hilti C4 Bedienungsanleitung

Hilti

Hilti SFC7 Bedienungsanleitung

Hilti

Hilti RC 4/36 Bedienungsanleitung

Hilti

Hilti C 4/12-50 Bedienungsanleitung

Hilti

Hilti NURON C 4-22 Bedienungsanleitung

Hilti

Hilti Nuron C 6-22 Bedienungsanleitung

Hilti

Hilti C 7/24 Bedienungsanleitung

Hilti

Hilti NURON C 4-22 Bedienungsanleitung

Hilti

Hilti PUA Series Bedienungsanleitung

Hilti

Hilti C 4/12-50 Bedienungsanleitung

Hilti

Hilti C 4/36 Bedienungsanleitung

Hilti

Hilti C4/36-90 Bedienungsanleitung

Hilti

Hilti RC 4/36 Bedienungsanleitung

Hilti

Hilti C 7/24 Bedienungsanleitung

Hilti

Hilti C4/36-90 Bedienungsanleitung

Hilti

Hilti C4/36-90 Bedienungsanleitung

Hilti

Hilti C7 Bedienungsanleitung

Hilti

Hilti TCU 36 Bedienungsanleitung

Hilti

Hilti C4/36-90 Bedienungsanleitung

Hilti

Hilti C 4/36-DC Bedienungsanleitung

Hilti

Hilti C 4/36 MC4 Bedienungsanleitung

Beliebte Akkuladegerät Handbücher anderer Marken

AA Portable Power Corp

AA Portable Power Corp Universal Smart Charger Bedienungsanleitung

Enelion

Enelion Vertica Bedienungsanleitung

RCA

RCA CHU6 Bedienungsanleitung

ANSMANN

ANSMANN ALCT 6/24-10 Bedienungsanleitung

Hitachi

Hitachi UC 18YRSL Fehlerbehebungshandbuch

Olympus

Olympus B-20 LPC Bedienungsanleitung

Exibel

Exibel ZH1708143 Bedienungsanleitung

Lenmar

Lenmar Mach 1 Bedienungsanleitung

CTEK

CTEK MXS 5.0 Bedienungsanleitung

ABB

ABB HT842379 Bedienungsanleitung

Nitecore

Nitecore Superb Charger SC4 Bedienungsanleitung

Renogy

Renogy RBC2125DS-21W Bedienungsanleitung

Braun

Braun BWC02M Bedienungsanleitung

CTEK

CTEK MXS 3.6 Bedienungsanleitung

Black & Decker

Black & Decker BDV090 Bedienungsanleitung

Trinity

Trinity DPD Bedienungsanleitung

Hulkman

Hulkman Sigma 1 Bedienungsanleitung

IKEA

IKEA koppla Bedienungsanleitung