HIMS Blaze EZ Bedienungsanleitung
Quick Start Guide – Blaze EZ
II
- Table of Contents -
1. What’s in the box? ................................................................1
2. Physical description ..............................................................1
2.1. The Top Face.................................................................1
2.2. The Right Edge ..............................................................3
2.3. The Left Edge.................................................................4
2.4. The Bottom Edge ...........................................................4
2.5. The Back Face ...............................................................4
3. Inserting and Removing the Battery .....................................5
4. Inserting and Removing the SD Card. ..................................5
5. Connecting to a PC...............................................................6
6. Powering On/Off ...................................................................7
7. The Home Menu ...................................................................8
8. Basic Interface and Programming ........................................9
8.1. Recording.......................................................................9
8.2. Music..............................................................................9
8.3. FM Radio......................................................................10
8.4. Books ...........................................................................11
8.5. OCR .............................................................................12
9. Web-based Programming...................................................12
9.1. Online DAISY ...............................................................12
9.2. Podcasts ......................................................................13
9.3. Web Radio ...................................................................14
10. Checking Date and Time ..................................................15
Quick Start Guide – Blaze EZ
III
Introduction
This Quick Start guide gives you a basic orientation to your Blaze
EZ, shows you how to connect and charge the battery, how to
turn the unit on and off, how to access programs on the unit and
how to prevent the accidental pressing of buttons.
This is a basic guide to help you get oriented to the unit and get
you started using the basic programming. Please refer to the full
user manual for more detailed information on the functions of the
Blaze EZ.
Quick Start Guide – Blaze EZ
1
1. What’s in the box?
Your Blaze EZ packing box should contain all of the following
items:
1) Blaze EZ
2) Rechargeable battery pack
3) AC adapter
4) USB cable for connecting Blaze EZ to a PC
5) USB Gender adapter for connecting USB drives to Blaze
EZ
6) Headphones
7) Carrying pouch
8) Lanyard
9) Quick Start Guide in print and Braille.
10) Documentation CD
2. Physical description
Place the Blaze EZ in your hand or on a desk or table top in front
of you so that the keypad is facing up and the long rectangular
slot on the side of the unit is facing left.
2.1. The Top Face
The top face of the unit contains the main keypad. At the top
center is a slightly recessed square button. This is the Power
On-Off button. To the left and right of the Power button are the
stereo speakers.
Below the Power button, toward the left is a round button. This
is the Record button.
Below the Record button is a row of 3 square buttons with
Braille labels. From left to right these buttons are the Media
button, the Radio button, and the Books button. These buttons
open the Media Player, the FM Radio, and the Book Reader
respectively.
Quick Start Guide – Blaze EZ
2
Below the program buttons is a circular navigation pad
containing 5 keys: the Left, Right, Up and Down arrows, and a
small round button in the center which is the Select button.
Below the navigation pad is a row of 3 buttons: 2 square
buttons with a dot-like button between them. The square button
on the left is the Cancel button. The Square button on the right
is the OCR button. The dot-like button between them is the
Explorer button. The Explorer button brings up a list of files
associated with the currently open program. For example, if
you have the BOOK reader opened, pressing the explorer
button will bring up a list of DAISY books and documents
readable by the Book Reader. The Cancel button is used to
exit a program, menu or dialog.
<The Top Face>
Music Button
OCR Button
Book Button
Radio Button
Record Button
Power On/Off Button
Navigation Pad
Cancel Button
Explorer Button
Quick Start Guide – Blaze EZ
3
2.2. The Right Edge
The right side of the unit contains 3 controls. Nearest the top of
the unit is the volume dial. Turn the dial away from you to
increase the volume, and turn it toward you to decrease it. As
you adjust the volume, you will feel the dial click past each
setting, and the unit announces the volume level as a number.
Below the Volume dial is the Voice Control button. The Voice
Control button allows you to quickly access Speed, volume,
and pitch settings for the TTS. Cycle through the settings with
repeated presses of the Voice Control button, and use the
Volume dial to adjust the chosen setting.
Below the Voice Control button is the Keylock switch. Place the
Keylock switch in the down position to lock the keyboard and in
the up position for normal operation.
Volume Dial
Reset Button
Key lock Switch
Voice control
Button
<The Left and Right EDGE>
SD card slot
Quick Start Guide – Blaze EZ
4
2.3. The Left Edge
The left edge of the unit contains a long, thin, rectangular slot.
This is the SD card slot.
2.4. The Bottom Edge
If you move around to the edge nearest your body, you will
discover 3 ports. From left to right these ports are the
headphone jack, the micro USB port, and the stereo
microphone jack. Use the headphone jack to connect
headphones or external speakers to the unit. Use the
microphone jack to connect an external microphone or line-in
recording source to the unit. The micro USB port is used to
connect the Blaze EZ to a PC for transferring files, to connect a
thumb drive or CD-ROM drive to the unit, or to connect the AC
adapter for charging the unit.
2.5. The Back Face
Flip the Blaze EZ over in your hand so that the SD card slot is
now on the right side. The back face or underside of the unit
contains 3 things. At the very top in the center are a couple of
holes for connecting the lanyard
Underneath the lanyard connection is the OCR camera. Below
that is a triangular ridged section. If you press down and
backward on this section, the majority of the back of the unit
slides away to reveal the battery compartment.
<The Bottom Edge>
Head phone Jack
Micro USB Port
Stereo micro Jack
Quick Start Guide – Blaze EZ
5
3. Inserting and Removing the Battery
As described above, you can access the battery compartment by
sliding the back off of the unit. With the keypad facing down and
the SD card slot facing to the right, locate the triangular ridged
section under the camera on the back of the unit. Press down
and backward on the triangular ridge to release and slide the
back away from the unit.
To insert the battery pack into the unit, hold it so that the edge
with the small ridge is facing toward you with the ridge on the left.
You should also notice a small dot near the bottom left corner of
the top surface of the battery. Place the ridged end into the
bottom of the battery compartment first, then gently press down
on the top of the battery to secure it in place. Slide the back
casing on to the unit and click it into place.
To remove the battery pack, slide the back casing off of the unit.
Place your fingernail between the top of the battery pack and the
edge of the compartment and lift the battery up and out.
4. Inserting and Removing the SD Card.
With the keypad facing you, locate the long rectangular slot near
the bottom of the left edge.
To insert the SD card, locate the corner of the SD card that is cut
at a 45 degree angle. Place the SD card so that this cut corner is
at the top right when you insert the card into the SD slot. The
surface of the label should be face down. Gently press the SD
card into the slot until it clicks into place. Do not use excessive
force. Only slight pressure is required to insert the SD card in the
Quick Start Guide – Blaze EZ
6
slot. If the Blaze EZ is turned on, you will hear a sound to confirm
that it has been recognized.
To remove the SD card, gently press the SD card into the card
slot until it clicks, then release it. The SD card will pop out of the
slot enough for you to grip it and pull it out completely. If the
Blaze EZ is turned on, you will hear a sound to confirm that it has
detected the removal of the SD card.
5. Connecting to a PC
Locate the small rectangular port on the center of the front edge
of the Blaze EZ between the headphone and microphone jacks.
To transfer files from your PC to your Blaze EZ, turn on the Blaze
EZ and connect the small end of the USB cable provided with the
unit to the Micro USB port on the front edge and connect the
larger end to your PC's USB port.
Once you connect to your PC, click the "My computer" icon on
the PC. The Blaze EZ appears as a portable media device under
Windows labeled Blaze EZ. if you open "Blaze", you will see
Blaze EZ's drive under "Internal Storage". If you have an SD card
inserted, it appears as "SD card".
Quick Start Guide – Blaze EZ
7
You may copy and organize documents, media, DAISY books
and scanned images in whatever way makes the most sense to
you. The Blaze EZ will locate playable content no matter where it
resides on the disk and index it and make it available for the
associated programs.
6. Powering On/Off
To power on the Blaze EZ, press and hold the Power button for 2
seconds. The first time you insert the battery or connect AC
power to the Blaze EZ, the unit automatically boots with a short
beep followed by a musical flourish with "HIMS" spoken. After
this, progress beeps are heard, followed by the power on sound.
Next, the unit announces, "Scanning disk" and the unit scans the
internal flashdisk as well as any storage device currently
connected for content playable by Blaze EZ. As stated in the
previous section, it is not necessary to place content in any set
folder structure as this process will scan and index all playable
content on all storage devices and make it available for its
associated program. After a few seconds, the unit announces
"Scanning complete".
You are placed at the Home Menu, described in the next section.
To power off Blaze EZ, press and hold the Power button again
for 2 seconds. The power down sound is heard, and the unit is
powered off.
After the initial boot sequence described above, you can power
the unit on and off quickly by pressing and holding the “Power”
button and the unit will power on at the Home menu. However, if
the battery is depleted, or the unit is reset, the Blaze EZ will go
through the more lengthy boot process described above.
Inhaltsverzeichnis
Andere HIMS MP3-Player Handbücher
Beliebte MP3-Player Handbücher anderer Marken
Blaupunkt
Blaupunkt Compact Drive MP3 Bedienungsanleitung
Memorex
Memorex MMP9008 - 8GB USB 2.0 Bedienungsanleitung
Meizu Electronic Technology
Meizu Electronic Technology E5 Bedienungsanleitung
Naxa
Naxa NMV-173NX Bedienungsanleitung
Philips
Philips PSA250 Bedienungsanleitung
Zipy
Zipy go! Waving Bedienungsanleitung
