TITLE
SAFETY
THIS IS THE SAFETY ALERT SYMBOL.
IT ALERTS AN OPERATOR TO INFOR-
MATION CONCERNING PERSONAL
SAFETY. ALWAYS OBSERVE, AND HEED
THESE SYMBOLS AND INSTRUCTIONS, OTH-
ERWISE DEATH, OR SERIOUS INJURY CAN
RESULT!
Operator safety is a principle concern in equip-
ment design and distribution. However, many ac-
cidents occur because a few seconds of thought,
and a more careful approach to handling, were
ignored.
Throughout this manual, and on all safety relat-
ed decals, a safety alert symbol, along with the
signal word CAUTION, WARNING, or DANGER
willbefound.Thesearedenedasfollows:
CAUTION: A reminder for proper safe-
ty practices and directs attention to
following them. Decals of this class
are yellow and black.
WARNING: A reminder for proper safe-
ty practices and what can happen if
they are ignored. This has a more seri-
ous consequence than CAUTION. Decals of
this class are yellow and black.
DANGER: Denotes the most serious
safety hazard. It is a reminder for ob-
serving the stated precautions and
what can happen if they are ignored. Decals
of this class are red and white.
CAUTION:For your own protection we
very strongly recommend that you
read, understand, and heed the follow-
ing information.
CAUTION: If you and your operator(s)
are not intimately familiar with proper
handling procedures for Anhydrous
Ammonia, contact your supplier for informa-
tion, and read all safety precautions found in
the “HINIKER ANHYDROUS AMMONIA MONI-
TORING AND CONTROL SYSTEM MANUAL”,
Refer to manual Part No. 360-000-246 Revi-
sion E or higher for Heat Exchangers man-
ufactured prior to 2007. These are painted
Gray.
or
Refer to manual Part No. 39300035 for Heat
exchangers manufactured in 2007 or after.
These are painted White Additional manuals
may be obtained from your local dealer.
ACCIDENTS CAN BE AVOIDED BY KNOW-
ING, AND FOLLOWING, THE PRECAUTIONS
CITED IN THIS MANUAL.
GENERAL
1. If the Operator’s Manual is missing from this
equipment, obtain a replacement from your
HINIKER dealer. If you sell this equipment,
ensure the new owner acknowledges receipt
of this manual.
2. Read this manual thoroughly. Make sure the
operator understands it and knows how to
operate this equipment safely. Farm equip-
ment can kill or injure an untrained, or care-
less operator.
3. Do not attempt to handle and service this
equipment, or direct others to do the same,
unless you know how to do it safely.
4. Don’t be in a hurry.
Hiniker Company reserves the right to change
prices, standard features, specications or
designs, and options at any time without no-
tice and without incurring the obligation to
install such changes on machines previously
manufactured.
Safety 3
