Hioki 9333 Bedienungsanleitung
EN
Instruction Manual
9333
LAN COMMUNICATOR
Jan. 2016 Revised edition 9
9333A981-09 16-01H
Contents
Introduction i
Notes on Use i
Chapter 1 Overview 1
1.1 Product Overview 1
1.2 Specifications 2
Chapter 2 Setup 3
2.1 System Configuration Required 3
2.2 Installing and Uninstalling the Software 4
2.3 Checking the Memory HiCorder Version 5
2.4 LAN Settings 6
Chapter 3 Remote Control (RmtCtrl) 9
3.1 Starting the Remote Control Application 9
3.2 Remote Control Menus 10
3.3 Connecting to the Memory HiCorder 11
3.4 Memory HiCorder Operations 12
3.5 Receiving Waveform Data 14
3.6 Printing Waveform Data 16
3.7 Other Functions 17
3.7.1 Changing the Connection Timeout Setting 17
3.7.2 Changing the Screen Image Transfer Interval 18
3.7.3 Changing the Key Repeat Interval 18
3.7.4 Saving the Screen Image 19
3.7.5 Printing a Screen Image 19
3.7.6 Changing the Printing Settings 19
3.7.7 Comment Transmission Function 20
3.7.8 Escaping from the Key Check Screen 20
3.7.9 Send Print Key 21
3.7.10 Version Information 21
Chapter 4 Data Collection (Accumulator) 23
4.1 Starting the Data Collection Application 24
4.2 Data Collection Menus 25
4.3 Preparation for Data Collection 26
4.3.1 Selecting the Port to Go on Standby 26
4.3.2 Making Save Settings 27
4.3.3 Selecting the Print Image Color 28
4.3.4 Printer Settings 28
4.3.5 Memory HiCorder Settings 29
9333A981-09
4.4 Starting Data Collection 31
4.5 Location of Saved Files 32
Chapter 5 Waveform Viewer (Wv) 35
5.1 Starting the Waveform Viewer 36
5.2 Waveform Viewer Menus 37
5.3 Using the Waveform Viewer 39
5.4 Conversion to CSV Format 42
5.5 Converting Multiple Waveform Files into CSV Files 44
_____________________________________________________________________________________________
______________________________________________________________________________________________
_____________________________________________________________________________________________
______________________________________________________________________________________________
i
_____________________________________________________________________________________________
______________________________________________________________________________________________
CAUTION Indicates that incorrect operation presents possibility of injury to
the user or damage to the equipment.
NOTE Denotes items of advice related to performance of the
equipment or to its correct operation.
Introduction
Notes on Use
Thank you for purchasing this HIOKI "9333 LAN COMMUNICATOR."
To get the maximum performance from the unit, please read this manual
first, and keep this at hand.
Trademarks
Pentium is a registered trademark of Intel Corporation.
Windows is a registered trademark of Microsoft Corporation.
In order to ensure safe operation and to obtain maximum performance from
the unit, observe the cautions listed below.
Always hold the disc by the edges, so as not to make fingerprints on the
label side or scratch the printing.
Never touch the recorded side of the disc. Do not place the disc directly
on anything hard.
Do not wet the disc with volatile alcohol or water, as there is a possibility
of the label printing disappearing.
To write on the disc label surface, use a spirit-based felt pen. Do not use a
ball-point pen or hard-tipped pen, because there is a danger of scratching
the surface and corrupting the data. Do not use adhesive labels.
Do not expose the disc directly to the sun's rays, or keep it in conditions
of high temperature or humidity, as there is a danger of warping, with
consequent loss of data.
To remove dirt, dust, or fingerprints from the disc, wipe with a dry cloth,
or use a CD cleaner. Always wipe radially from the inside to the outside,
and do no wipe with circular movements. Never use abrasives or solvent
cleaners.
In the interests of ongoing product developments, there may be minor
discrepancies between screen displays and the operating instructions, and
in the data conversion process.
HIOKI cannot accept any responsibility for the results of using this
product.
The following symbols are used in this Instruction Manual to indicate the
relative importance of cautions and warnings.
ii
_____________________________________________________________________________________________
______________________________________________________________________________________________
1
_____________________________________________________________________________________________
1.1 Product Overview
______________________________________________________________________________________________
NOTE ･When not using a LAN (when no LAN card is installed), and the memory
recorder function time axis setting is 10 ms/division or above, the waveform is
displayed sequentially. However, when a LAN is used, the waveform is only
displayed sequentially if the setting is 100 ms/division or above.*
Similarly, in roll mode the minimum setting is 100 ms/division.
･It can not be monitored by Remote control application while it is measured with
X-Y CONT recorder.
･When the Recorder function time axis setting is 20 ms/DIV, it can not be
monitored b
y
8826 with the Remote control a
pp
lication durin
g
the measurement.
Chapter 1
Overview
1.1 Product Overview
The 9333 LAN COMMUNICATOR comprises the following three software
applications.
1. Remote control (RmtCtrl)
This application provides remote control of the Memory HiCorder from a
computer, through a LAN. This allows you to make settings on the
Memory HiCorder and carry out simple monitoring.
You can transfer waveform data from the Memory HiCorder to the
computer, and print reports on the computer.
2. Data collection (Accumulator)
This software provides Memory HiCorder auto save and auto print
functions on the computer.
A single computer can collect data from multiple Memory HiCorders, for
centralized handling of Memory HiCorder measurement data on the
computer, or printing of waveform data using the computer's printer.
3. Waveform viewer (Wv)
This provides a simple viewing facility for waveform files transferred
from the Memory HiCorder being used for remote control and data
collection.
You can convert binary data to CSV format: CSV files are convenient
because they can be read into spreadsheets and other software.
*: except MR8827, MR8847A, MR8847, 8847, MR8740, MR8741 (These models follow
the "roll mode" settings)
2
_____________________________________________________________________________________________
1.2 Specifications
______________________________________________________________________________________________
Supplied medium One CD-R
Supported recorders HIOKI MR8827, MR8847A, MR8847, 8847,
MR8740, MR8741, 8730, 8731, 8826, 8835-01,
8841, 8842, 8855, 8720
Operating environment Windows 10/ 8/ 7/ Vista/ XP
(with LAN installed and TCP/ IP available)
Communications Ethernet, TCP/ IP
1.2 Specifications
General specification
Functional specifications
(1) Remote control application (RmtCtrl)
･Memory HiCorder remote control function
Control carried out by sending key codes and receiving screen image
･Report printing
･Screen shot printing
･Receiving waveform data files
Same format as the Memory HiCorder waveform save function, but
binary only, and if the cursors are shown, only the interval between the
cursors.
(2) Data collection application (Accumulator)
･Receiving Memory HiCorder auto save files
Same format as the Memory HiCorder auto save function, but
waveform data is binary only (text format can be selected in
MR8827, MR8847A, MR8847, 8847, MR8740, MR8741, 8730, 8731,
8855), and if the cursors are shown, only the interval between the
cursors. (MR8827, MR8847A, MR8847, 8847, MR8740, MR8741,
8855 are depending on the format that you set in the Memory
HiCorder)
･Memory HiCorder auto print function, printing on the computer
･Memory HiCorder screen hard copy function, printing on the computer
(MR8827, MR8847A, MR8847, 8847, MR8740, MR8741, 8855 are
not supported)
･Memory HiCorder PRINT key, printing on the computer
(3) Waveform viewer (Wv)
･Waveform file display (support for binary files in MEM, REC, RMS,
and POW format)
･Conversion to CSV format (can thin, or specify section)
･Display format settings (scroll function, zoom display, display channel
setting)
Inhaltsverzeichnis
Andere Hioki Handy Handbücher
Beliebte Handy Handbücher anderer Marken
Point Mobile
Point Mobile PM60 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Q10 Bedienungsanleitung
Blackbe;rry
Blackbe;rry Bold 9900 Bedienungsanleitung
Blackbe;rry
Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung
LG
LG LM-K420EMW Bedienungsanleitung
ISAFE MOBILE
ISAFE MOBILE IS655.2 Bedienungsanleitung