Hioki 3169-20 Gebrauchsanweisung

CLAMP ON POWER

Quick Start Manual

3169-20

July 2014 Revised edition 7 3169A983-07 14-07H

HiTESTER

3169-21

Contents

Introduction ________________________________ 1

Key Names and Functions ____________________2

Screen Configuration ..............................................................3

Common Display .....................................................................4

On-Screen Indicators ..............................................................5

Power Measurement _________________________ 6

Measurement Preparations ....................................................9

Basic Settings ........................................................................15

Connect the Voltage Cords and Clamp Sensors to the line

to be Measured .....................................................................18

Confirm the Range ................................................................20

Checking the Wiring ..............................................................22

Measurement Settings ..........................................................24

Start Measurement ................................................................27

View Measured Value ............................................................28

Stop Measurement ................................................................29

Headers of Output Data ........................................................31

Contents

Introduction 1

The 3169-20 and the 3169-21 Clamp On Power HiTester is supplied with a

instruction manual in addition to this manual. Please be sure to read both

manuals.

This manual provides a simplified description of the instrument (key names

and functions as well as screens) and measurement process, from the prepa-

ration stage to the completion of measurement, using an example application.

For current input with this instrument, a clamp-on sensor (optional) is

required. For details, refer to the instruction manual for the clamp-on sensor

you are using.

Be sure to review the instruction manual carefully before using the instru-

ment to ensure safe operation.

Model Numbers

In this manual, "3169" is used as the instrument model.

Notation

In this manual, the risk seriousness and the hazard levels are classified as

follows.

Introduction

Model No. D/A output function

3169-20 Not available

3169-21 Available

Indicates an imminently hazardous situation that will result in death or

serious injury to the operator.

Indicates a potentially hazardous situation that may result in death or

serious injury to the operator.

Indicates a potentially hazardous situation that may result in minor or

moderate injury to the operator or damage to the instrument or mal-

function.

Indicates prohibited actions.

Indicates the reference.

Indicates a useful measurement tip or fact.

*Additional information is presented below.

See

2Key Names and Functions

Quick Start Manual

Operation Keys

Key Names and Functions

MEASURE key Switches to a screen that displays measurements.

SET UP key Switches to a screen that displays settings or the next screen.

FILE key Used to work on files.

I RANGE key Sets the current measurement range for the circuit to be mea-

sured on-screen.

U RANGE key Sets the voltage measurement range.

SAVE key Enables the manual saving of measurement data on the PC

card or in internal memory. Manual saving is not possible dur-

ing time-series measurement.

COPY key Outputs screen image data to the PC card, internal memory, or

a printer.

START/STOP key Starts or stops time-series measurements including integration

measurement.

START/STOP LED Flashes in green while the instrument is standing by for time-

series measurement, and lights in green while the instrument is

performing time-series measurement.

Instruction manual "Chapter 2 Parts Names"

See

Cursor key

These keys move the

cursor on the screen.

Operation

Keys

Function (F1-F5) keys

Selects or switches the

screens and setting items.

Key Names and Functions 3

The screens are divided into three basic types: measurement screens, set-

ting screens, and file screens. Each screen is selected using three operation

keys: MEASURE, SET UP, and FILE.

Screen Configuration

Measurement screen

Setting screen

MAIN

POWER

INTEGRATE

DEMAND

ZOOM

HARMONIC LIST

HARMONIC GRAPH

WAVEFORM

WIRING CHECK

WIRING DIAGRAM

MEASUREMENT

DATA OUTPUT

SAVE, PRINT ITEMS

SYSTEM

D/A OUTPUT (3169-21 only)

INTERNAL SETTINGS

INTERNAL MEMORY

PC CARD

FIRMWARE UPDATE

File screen

4Key Names and Functions

Quick Start Manual

This section of the screen shows information common to all measurement

screens (except the zoom screen and the wiring diagram screen).

Common Display

Time

Range

Wiring

No. of circuits

Synchronization method

Interval

Time Displays the current time.

Range Displays the voltage range and current range of the on-

screen circuit. The VT(PT) ratio and CT ratio are shown

under these ranges. The current range and CT ratio of I4 are

shown only when 3P4W4I is set as the wiring method.

Wiring Displays the wiring method set on the setting screen.

No. of circuits Displays the number of circuits to be measured as set on the

setting screen.

Synchronization

method Displays the synchronization method and frequency of the

line to be measured as set on the setting screen.

Interval Displays the interval set on the setting screen.

Key Names and Functions 5

On-Screen Indicators

Goes on when the reactive-power-meter method is ON.

Instruction manual "5.2.3 Setting the Reactive-Power Meter Method"

Goes on when the displayed measurement is held.

Goes on when the medium for saving data is set to PC card.

Flashes when the PC card is accessed.

Goes on when the medium for saving data is set to internal memory.

Flashes when the internal memory is accessed.

Goes on when the PC card or internal memory is full.

Goes on when the device to be connected to the RS-232C is set to PC.

Goes on when the device to be connected to the RS-232C is set to

printer.

Goes on when the PLL is unlocked; the synchronization method is auto-

matically switched over to the fixed clock.

Instruction manual "5.2.2 Setting the Synchronization Method"

Goes on when the keys are locked.

Goes on when the voltage or current dynamic range is exceeded.

Displayed when the range is exceeded.

Reference U3* and I3* indicate that the data is obtained by calculating the

2-voltage, 2-current measurement results when 3P3W2M (three-

phase, 3-wire, 2-power-meter method) is selected.

Instruction manual "Appendix"

See

6Power Measurement

Quick Start Manual

This chapter explains setting and measurement procedures using the follow-

ing example.

Be sure to read the “Operating Precautions” section of the instruction manual

as well as other precautionary information that can be found its chapters

before using the instrument.

Procedures

See p.8 for more information about what you will need to perform measure-

ment.

* The reactive-power-meter method is used to measurereactive power directly from the

voltage and current, like a reactive power meter installed for large power consumers.

Power Measurement

• Data is automatically output to the PC card at 5-minute intervals.

• Average value (voltage, current, and power) and integrated power are

stored on the PC card.

• The reactive power-meter method*is not used.

Example:

Measure the power of a Three-phase 3-wire 200 V line for 7 days.

1. Connect the power cord. (p.10)

2. Connect the voltage cord to the 3169. (p.11)

3. Connect the clamp sensor to the 3169. (p.12)

4. Insert the PC card. (p.13)

5. Turn the Power switch ON. (p.14)

6. Basic settings (p.15)

7. Connect the voltage cords and clamp sensors to the line to be

measured. (p.18)

8. Confirm the range. (p.20)

9. Checking the wiring. (p.22)

10. Measurement settings (p.24)

11. Start measurement. (p.27)

Andere Handbücher für 3169-20

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hioki Prüfgeräte Handbücher

Hioki

Hioki 3285-20 Bedienungsanleitung

Hioki

Hioki 3455 Bedienungsanleitung

Hioki

Hioki BT5525 Bedienungsanleitung

Hioki

Hioki FT6380 Bedienungsanleitung

Hioki

Hioki 3805-50 Bedienungsanleitung

Hioki

Hioki 7011 Bedienungsanleitung

Hioki

Hioki 3288-20 Bedienungsanleitung

Hioki

Hioki 3159 Bedienungsanleitung

Hioki

Hioki IR4051 Bedienungsanleitung

Hioki

Hioki FT4310 Bedienungsanleitung

Hioki

Hioki 9699 Bedienungsanleitung

Hioki

Hioki CLAMP ON LEAK HiTESTER 3283 Bedienungsanleitung

Hioki

Hioki FT6031-50 Bedienungsanleitung

Hioki

Hioki 3455 Bedienungsanleitung

Hioki

Hioki IR4051 Bedienungsanleitung

Hioki

Hioki 3237 Bedienungsanleitung

Hioki

Hioki 3554 Bedienungsanleitung

Hioki

Hioki IR3455-01 Bedienungsanleitung

Hioki

Hioki BT5525 Benutzerhandbuch

Hioki

Hioki 3281 Bedienungsanleitung

Hioki

Hioki 3550 Bedienungsanleitung

Hioki

Hioki HiTESTER 3540 Bedienungsanleitung

Hioki

Hioki 3803 Bedienungsanleitung

Hioki

Hioki FT3151 Bedienungsanleitung

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung

Ritmix

Ritmix RAT-701 Bedienungsanleitung