Hirschmann RS20 series Bedienungsanleitung
RM Web
Release
6.0
07/2010
Technical Support
Reference Manual
Web-based Interface
Industrial ETHERNET (Gigabit) Switch
RS20/RS30/RS40, MS20/MS30, OCTOPUS
The naming of copyrighted trademarks in this manual, even when not specially indicated, should
not be taken to mean that these names may be considered as free in the sense of the trademark
and tradename protection law and hence that they may be freely used by anyone.
© 2010Hirschmann Automation and Control GmbH
Manuals and software are protected by copyright. All rights reserved. The copying, reproduction,
translation, conversion into any electronic medium or machine scannable form is not permitted,
either in whole or in part. An exception is the preparation of a backup copy of the software for
your own use. For devices with embedded software, the end-user license agreement on the
enclosed CD applies.
The performance features described here are binding only if they have been expressly agreed
when the contract was made. This document was produced by Hirschmann Automation and
Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right
to change the contents of this document without prior notice. Hirschmann can give no guarantee
in respect of the correctness or accuracy of the information in this document.
Hirschmann can accept no responsibility for damages, resulting from the use of the network
components or the associated operating software. In addition, we refer to the conditions of use
specified in the license contract.
You can get the latest version of this manual on the Internet at the Hirschmann product site
(www.hirschmann-ac.de).
Printed in Germany
Hirschmann Automation and Control GmbH
Stuttgarter Str. 45-51
72654 Neckartenzlingen
Germany
Tel.: +49 1805 141538
Rel. 6.0 1-01-07/2010 – 14.7.10
Contents
About this Manual 7
Key 9
Opening the Web-based Interface 11
1 Basic Settings 15
1.1 System 16
1.2 Network 21
1.3 Software 23
1.3.1 View the software versions present on the device 23
1.3.2 TFTP Software Update 24
1.3.3 HTTP Software Update 24
1.3.4 Automatic software update by ACA 25
1.4 Port Configuration 26
1.5 Power over ETHERNET 28
1.6 Loading/Saving the Configuration 30
1.6.1 Loading the configuration 31
1.6.2 Saving the Configuration 31
1.6.3 URL 32
1.6.4 Deleting a configuration 32
1.6.5 Using the AutoConfiguration Adapter (ACA) 33
1.6.6 Canceling a configuration change 34
1.7 Restart 36
2 Security 39
2.1 Password / SNMPv3 access 40
2.2 SNMPv1/v2 Access Settings 42
2.3 Telnet/Web Access 45
2.3.1 Description of Telnet Access 46
2.3.2 Description of Web Access 46
2.4 Restricted Management Access 47
2.5 Port Security 50
Contents
4RM Web
Release
6.0
07/2010
3Time 53
3.1 SNTP configuration 55
3.2 PTP (IEEE 1588) 59
3.2.1 PTP Global (MS20/MS30, PowerMICE, MACH 104,
MACH 1040) 60
3.2.2 PTP Version 1 (MS20/MS30, PowerMICE,
MACH 104, MACH 1040) 64
3.2.3 PTP Version 2 (BC) (MS20/MS30, PowerMICE,
MACH 104, MACH 1040) 66
3.2.4 PTP Version 2 (TC) (MS20/MS30, PowerMICE) 71
4 Switching 75
4.1 Switching Global 76
4.2 Filters for MAC addresses 80
4.3 Rate Limiter 82
4.3.1 Rate Limiter settings 82
4.4 Multicasts 85
4.4.1 IGMP (Internet Group Management Protocol) 85
4.5 VLAN 93
4.5.1 VLAN Global 93
4.5.2 Current VLAN 96
4.5.3 VLAN Static 98
4.5.4 VLAN Port 100
5 QoS/Priority 103
5.1 Global 104
5.2 Port Configuration 107
5.2.1 Entering the port priority 108
5.3 802.1D/p mapping 109
5.4 IP DSCP mapping 111
6 Redundancy 113
6.1 Ring Redundancy 114
6.1.1 Configuring the HIPER-Ring 116
6.1.2 Configuring the MRP-Ring 120
6.2 Ring/Network Coupling 123
6.2.1 Preparing a Ring/Network coupling 123
Contents
RM Web L2E
Release
6.0
07/2010 5
6.3 Spanning Tree 130
6.3.1 Global 132
6.3.2 Port 138
7 Advanced 147
7.1 DHCP Relay Agent 148
7.2 Industrial Protocols 150
7.2.1 PROFINET IO 150
7.2.2 EtherNet/IP 152
7.3 Command Line 153
8 Diagnostics 155
8.1 Syslog 156
8.2 Event Log 161
8.3 Ports 162
8.3.1 Statistics table 162
8.3.2 Utilization 163
8.3.3 SFP modules 164
8.4 Topology Discovery 165
8.5 Port Mirroring 167
8.6 Device Status 169
8.7 Signal contact 172
8.7.1 Manual setting 172
8.7.2 Function monitoring 172
8.7.3 Device status 174
8.7.4 Configuring traps 174
8.8 Alarms (Traps) 176
8.9 Report 179
8.10 IP address conflict detection 181
8.11 Self Test 183
8.12 Service mode 184
8.12.1 Activating the service mode 185
About this Manual
RM Web L2E
Release
6.0
07/2010 7
About this Manual
The "Web-based Interface" reference manual contains detailed information
on using the Web interface to operate the individual functions of the device.
The "Command Line Interface" reference manual contains detailed
information on using the Command Line Interface to operate the individual
functions of the device.
The “Installation” user manual contains a device description, safety
instructions, a description of the display, and the other information that you
need to install the device.
The “Basic Configuration” user manual contains the information you need to
start operating the device. It takes you step by step from the first startup
operation through to the basic settings for operation in your environment.
The “Industry Protocols” user manual describes how the device is connected
by means of a communication protocol commonly used in the industry, such
as EtherNet/IP or PROFINET IO.
The Network Management Software HiVision/Industrial HiVision provides
you with additional options for smooth configuration and monitoring:
XConfiguration of multiple devices simultaneously.
XGraphical interface with network layouts.
XAuto-topology discovery.
XEvent log.
XEvent handling.
XClient / Server structure.
XBrowser interface
XActiveX control for SCADA integration
XSNMP/OPC gateway
About this Manual
8RM Web
Release
6.0
07/2010
Key
RM Web L2E
Release
6.0
07/2010 9
Key
The designations used in this manual have the following meanings:
Symbols used:
XList
Work step
Subheading
Link Indicates a cross-reference with a stored link
Note: A note emphasizes an important fact or draws your
attention to a dependency.
Courier ASCII representation in user interface
WLAN access point
Router with firewall
Switch with firewall
Router
Switch
Bridge
Key
10 RM Web
Release
6.0
07/2010
Hub
A random computer
Configuration Computer
Server
PLC -
Programmable logic
controller
I/O -
Robot
Andere Handbücher für RS20 series
20
Dieses Handbuch passt für folgende Modelle
4
Inhaltsverzeichnis
Andere Hirschmann Schalten Handbücher
Hirschmann
Hirschmann Dragon PTN Bedienungsanleitung
Hirschmann
Hirschmann GREYHOUND GRS1020 Bedienungsanleitung
Hirschmann
Hirschmann RSPE 30 Bedienungsanleitung
Hirschmann
Hirschmann RS20 series Bedienungsanleitung
Hirschmann
Hirschmann LION-GIGA-1SX Bedienungsanleitung
Hirschmann
Hirschmann MACH104-20TX-F Series Bedienungsanleitung
Hirschmann
Hirschmann MACH1000 Series Bedienungsanleitung
Hirschmann
Hirschmann Octopus II Bedienungsanleitung
Hirschmann
Hirschmann LRS Series Bedienungsanleitung
Hirschmann
Hirschmann PowerLION-24TP Bedienungsanleitung
Hirschmann
Hirschmann MSM20 Bedienungsanleitung
Hirschmann
Hirschmann MACH4000 Series Bedienungsanleitung
Hirschmann
Hirschmann PowerMICE Bedienungsanleitung
Hirschmann
Hirschmann PAT TRS 05 / PATB3 Benutzerhandbuch
Hirschmann
Hirschmann GECKO Bedienungsanleitung
Hirschmann
Hirschmann SPIDER 8TX-PRO Bedienungsanleitung
Hirschmann
Hirschmann SPIDER PL Bedienungsanleitung
Hirschmann
Hirschmann RSP 20 Bedienungsanleitung
Hirschmann
Hirschmann RS20 series Bedienungsanleitung
Hirschmann
Hirschmann OCTOPUS 8TX-EEC Bedienungsanleitung
