Hisense HAF240A Bedienungsanleitung

INSTRUCTION MANUAL

MODEL: HAF240A

IMPORTANT: before you install your refrigerator PLEASE CHECK FOR ANY DAMAGE

OR MARKS. If you find that the refrigerator is damaged or marked you must report this

within 7 days if you wish to claim for the damaged marks under the manufactures

warranty.

This does not affect your statutory rights.

Dear customer,

Before placing your new refrigerator/freezer into operation, please read these operating

instructions carefully. They contain important information for safe use, for installation and

for maintenance of the appliance. Please keep these operating instructions for future

reference. Pass them on to possible new owners of the appliance.

Notes: which are important for your safety or for the proper functioning of the appliance,

are stressed with a warning triangle and or with signal words (Warning!, Caution!,

Important! ). Please observe the following carefully. Supplementary information

regarding operation and practical applications of the appliance appear after this symbol.

Tips and notes concerning economical and environmentally sound use of the appliance

are marked with the cloverleaf.

The operating instructions contain instructions for the correction of possible malfunctions

by the user in the section “Trouble shooting”. If these instructions should not be sufficient,

contact your local Service Force Center.

INDEX

Important safety instructions······························································································3

Remove transport packaging·····························································································4

Installation·······································································································································5

Reversing the door····················································································································5

Description of the appliance·······························································································6

Cleaning and Care···················································································································· 8

Trouble shooting·······················································································································10

Important safety instructions

These warnings are provided in the interests of your safety. Ensure that you understand

them all before installing or using this appliance. Your safety is of paramount importance.

If you are unsure about the meanings of these warnings, contact the Customer Care

Department for assistance.

Intended to use

The refrigerator is intended for use in the home. It is suitable for the storage of food at low

temperature. If the appliance is used for purposes other than those intended or used

incorrectly, no liability can be accepted by the manufacturer for any damage that may be

caused.

If you use the refrigerator in a commercial application or for purposes other than the

cooling of foods, the manufacturer accepts no liability for any damages that may occur.

Prior to initial start-up

Check the appliance for transport damage. Under no circumstances should a damaged

appliance be plugged in. In the event of damage, please contact your supplier.

Refrigerant

Refrigerant gas is contained within the refrigerant circuit of the appliance. Ensure that

none of the components of the refrigerant circuit becomes damaged during transportation

and installation.

If the refrigerant circuit should be damaged:

zAvoid opening near flames and sources of ignition.

zThoroughly ventilate the room in which the appliance is situated.

The instructions shall include the warnings:

WARNING—Ensure freezer is located in well ventilated area.

WARNING—Do not use hair dryers or other means to accelerate the defrosting process,

other than those recommended by the manufacturer.

WARNING—Do not damage the refrigerant circuit.

WARNING—Do not use electrical appliances inside the food storage compartments.

WARNING—The appliance is not intended for use by young children or infirm persons without

supervision.

WARNING—When disposing of the appliance do so only at an authorized waste disposal

centre. Do not expose to flame.

WARNING—If the supply cord is damaged, it must be replaced by the manufacturer or its

service agent or a similarly qualified person.

Safety for children

Keep packaging material away from children to avoid the risk of suffocation.

Disposal

When you dispose of freezers, please remove any doors. Children can suffocate if they

get trapped inside. Avoid safety hazards by carefully disposing of this appliance.

Daily operation

Do not store any containers with flammable materials such as spray cans, fire

extinguisher refill cartridges etc. in the refrigerator and/or freezer.

Do not operate any electrical appliances in the refrigerator and/or freezer.

Before cleaning the appliance, always switch off the appliance and unplug it.

In case of malfunction

If a malfunction occurs on the appliance, please look first in the “Trouble Shooting”

section of these instructions. If the information given there does not help, please do not

perform any further repairs yourself.

Under no circumstance should you attempt to repair the appliance yourself. Repairs

carried out by inexperienced persons may cause injury or serious malfunctioning. Contact

your local Service Center.

Remove transport packaging

The appliance and the interior fittings are protected for transportation. Pull off the

adhesive tape on the left and right side of the door. You can remove any remnants of

adhesive using white spirit. Remove all adhesive tape and packing pieces from the

interior of the appliance.

Installation

Installation Location

The appliance should be set up in a well-ventilated, dry room. Energy use and efficient

performance of the appliance is affected by the ambient temperature.

The appliance should therefore

-Not be exposed to direct sunlight,

-Not be installed next to radiators, cookers or other sources of heat,

Your appliance will be heavy when loaded with food and must therefore be stood on a

strong firm floor.

Ventilation Requirements

For correct operation you should ensure that air could circulate freely around the back

and the top of the cabinet. There should be 100mm between the top of the cabinet and

allow 50mm between the top of the cabinet and any overhanging kitchen furniture and a

gap of 25mm on either side of the appliance.

Ensure that the appliance does not stand on the electrical supply cable. Whenever

possible the back of the appliance should be close to a wall but leaving the required

distance for ventilation.

Leveling

The appliance should be level to eliminate rocking. Ensure the appliance is upright and

both adjusters are in firm contact with the floor so that the cabinet is level. Adjust the level

by screwing out the appropriate level adjuster at the front, (use your fingers or a suitable

spanner). This appliance is heavy. Care should be taken when moving it.

Your refrigerator needs air

For correct operation this appliance must be located in a dry atmosphere, away from heat

sources, e.g. cookers, radiators, boilers and direct sunlight.

You should also ensure that air can circulate freely around the back and the top of the

cabinet. There should be 100mm between the top of the cabinet and any overhanging

kitchen furniture. Alternatively allow 50mm between the top of the cabinet and any

overhanging kitchen furniture and a gap of 25mm on either side of the appliance.

Reversing the door

The side at which the door opens can be changed from the right side (as supplied) to the

left side, if the installation site requires. Tilt the appliance slightly towards the rear and

prop it securely. Unscrew the door hinge screws and remove the hinge pin bracket. Open

the door a little way and take it out downwards.

Unscrew the upper pin and screw it into place on the opposite side. Fit the door into the

upper pin and close it. Screw the hinge pin bracket securely into place on the opposite

side using the screws.

Warning!

When changing the side at which the door opens, the appliance must not be connected to

the mains. Remove plug from the mains beforehand.

Description of the appliance

View of the appliance

1. Butter/cheese compartments

with flap and egg storage insert

2. Door storage compartment

3. Bottle shelf

4. Fan

5. Temperature regulator

6. Storage shelves

7. Vegetable drawer cover

8. Vegetable drawer

9. Leveling leg

Starting up and temperature regulation

Insert the plug of the connection lead into the plug socket with protective earth contact.

When the refrigerator compartment door is opened, the internal lighting is switched on.

The temperature selector knob is located on the RH side of the refrigerator compartment.

Setting 0 means:

Off.

Turning clockwise in direction Refrigerating unit on, the latter then operating

automatically.

Setting 1 means:

Highest temperature, warmest setting.

Setting 7 (end-stop) means:

Lowest temperature, coldest setting.

At a low ambient temperature of around 16 ℃, setting 1 should be selected. At ambient

temperatures of around 25 ℃, select setting 2. If you require a lower temperature, select

setting 3 or 4.

Important!

High ambient temperatures (e.g. on hot summer days) and a cold setting on the

temperature regulator (position 6 to 7) can cause the compressor to run continuously.

Reason: when the ambient temperature is high, the compressor must run continuously to

maintain the low temperature in the appliance. The fridge will not be able to defrost since

automatic defrosting of the fridge is only possible when the compressor is not running

(see also“Defrosting”section). The result is the build up of a thick layer of frost on the

fridge rear wall.

If this happens, turn the temperature regulator back to a warmer setting (position 3 to 4.

At this setting the compressor will be switched on and off as usual and automatic

defrosting recommenced.

Interior accessories

Various glass or plastic storage shelves and wire trays are included with your appliance -

different models have different combinations. You should always slide one of the full size

glass storage shelves into the lowest set of guides, above the fruit and vegetable

containers, and keep it in this position.

The height of the storage shelves can be adjusted:

To do this, pull the storage shelf forward until it can be swiveled upwards or downwards

and removed. Please do the same in reverse to insert the shelf at a different height.

Correct storage

1.Butter and cheese

2.preserves

3.Drinks

4.Cheese storage, fruit, and vegetables

5.Meat, salami, cold cuts, dairy produce

6.Ready meals, pastries, and preserves

Tip:

Food in the fridge should always be covered or packaged, to prevent drying and tainting

of other food.

The following are suited for packaging:

zPolyethylene airtight bags and wraps,

zPlastic containers with lids;

zSpecial plastic covers with elastic,

zAluminium foil.

Defrosting

The fridge defrosts automatically. The rear wall of the fridge covers with frost when the

compressor is running, and defrosts when the compressor is off. The water from the

thawing frost evaporates by itself.

Switching off the appliance

To switch off the appliance, turn the temperature regulator to position ”0”.

If the appliance is not going to be used for an extended period:

Remove all refrigerated packages.

Switch off the appliance by turning the temperature regulator to position “0”.

Remove the mains plug or switch off or disconnect the electricity supply.

Clean thoroughly (see section: Cleaning and Care)

Leave the door open to avoid the build up of odors.

Cleaning and Care

For hygienic reasons the appliance interior, including interior accessories, should be

cleaned regularly.

Warning!

The appliance may not be connected to the mains during cleaning. Danger of electrical

shock! Before cleaning switch the appliance off and remove the plug from the mains, or

switch off or turn out the circuit breaker or fuse.

Never clean the appliance with a steam cleaner. Moisture could accumulate in electrical

components, danger of electrical shock! Hot vapors can lead to the damage of plastic

parts. The appliance must be dry before it is placed back into service.

Important!

Ethereal oils and organic solvents can attack plastic parts, e.g. lemon juice or the juice

from orange peel, butyric acid, cleanser that contain acetic acid.

Do not allow such substances to come into contact with appliance parts.

Do not use any abrasive cleansers.

Remove the food from the refrigerator. Store it in a cool place, well covered. Switch the

appliance off and remove the plug from the mains, or switch off or turn out the circuit

breaker or fuse. Clean the appliance and the interior accessories with a cloth and

lukewarm water. Commercially available dish washing detergents may also be used. After

cleaning wipe with fresh water and rub dry. Accumulation of dust at the condenser

increases energy consumption. For this reason carefully clean the condenser at the back

of the appliance once a year with a soft brush or a vacuum cleaner. Check the water drain

hole on the rear wall of the fridge. Clear a blocked drain hole with the aid of the green peg

in the pack of accessories included with the appliance. After everything is dry place

appliance back into service.

Energy Saving tips

Do not install the appliance near cookers, radiators or other sources of warmth. High

ambient temperatures cause longer, more frequent operation of the compressor. Ensure

sufficient air circulation and exhaust at the appliance base and at the back wall of the

appliance. Never cover air vent openings. Do not place warm foods into the appliance.

Allow warm foods to cool first. Only leave door open as long as necessary. Do not set

temperature any colder than necessary. Keep the heat emitting condenser-the metal grille

on the rear wall of your appliance, always clean.

Changing the light bulb

Light bulb data: 220-240 V, max. 15 W

1. To switch off the appliance, set the temperature regulator to position “0”.

2. Unplug the mains plug.

3. To change the light bulb, undo the screw.

4. Press the light bulb cover as shown and slide it backwards.

5. Change the defective light bulb.

6. Refit the light bulb cover and the screw.

7. Put the refrigerator back into operation.

Warning!

Before changing the light bulb, switch off the appliance and unplug it, or pull the fuse or

the circuit breaker.

Inhaltsverzeichnis

Andere Hisense Kühlschrank Handbücher

Hisense

Hisense H620BS-WD Montageanleitung

Hisense

Hisense RB645N4BFE Montageanleitung

Hisense

Hisense H120RWH Montageanleitung

Hisense

Hisense RB400N4BC3 Montageanleitung

Hisense

Hisense RS669N4WC1 Montageanleitung

Hisense

Hisense RS-34WC SERIES Bedienungsanleitung

Hisense

Hisense FV14D6AWD Montageanleitung

Hisense

Hisense RT318N4ABN Montageanleitung

Hisense

Hisense RB296F4AW1 Montageanleitung

Hisense

Hisense HBM17 Series Bedienungsanleitung

Hisense

Hisense HMS016M6RVE Montageanleitung

Hisense

Hisense RR197D4AGN Montageanleitung

Hisense

Hisense RF26N6AFE Bedienungsanleitung

Hisense

Hisense RD-35DR4SAA/CPA Bedienungsanleitung

Hisense

Hisense RB434N4BFD Technisches Handbuch

Hisense

Hisense RT12A2CSE Bedienungsanleitung

Hisense

Hisense BCD-543WP2BF1Z6/HC1(H) Bedienungsanleitung

Hisense

Hisense RB438N4GB3 Montageanleitung

Hisense

Hisense HFU210N6CVE Montageanleitung

Hisense

Hisense RT18N6AWD Bedienungsanleitung

Hisense

Hisense RQ768N4GBE Montageanleitung

Hisense

Hisense RS818N4TCE Montageanleitung

Hisense

Hisense HRCD585BW Montageanleitung

Hisense

Hisense H740FS-WD Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung