Hisense HR6BMFF519B Bedienungsanleitung
HR6BMFF519B
2
Contents
Safety and warning information.2
Installing your new appliance7
Description of the appliance13
Display controls14
Using your appliance 1
Cleaning and care17
Helpful hints and tips.18
Troubleshooting
.
19
Disposal of the appliance21
Safety and warning information
For your safety and correct usage, before installing and first using the
appliance, read this user manual carefully, including its hints and warnings. To
avoid unnecessary mistakes and accidents, it is important to make sure that all
people using the appliance are thoroughly familiar with its operation and safety
features. Save these instructions and be sure that they remain with the
appliance if it is moved or sold, so that anyone using it throughout its life, will
be properly informed on its usage and safety notices.
For the safety of life and property, keep the precautions of these user's
instructions as the manufacturer is not responsible for damages caused by
omission.
Safety for children and others who are vulnerable eo le
According to EN standard
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
According to IEC standard
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person being responsible for their safety.
Keep all packaging away from children as there is risk of suffocation.
If you are discarding the appliance, pull the plug out of the socket, cut the
connection cable (as close to the appliance as you can) and remove the
door to prevent children playing from suffering an electric shock or from
closing themselves inside it.
If this appliance, featuring a magnetic door seals, is to replace an older
appliance having a spring lock (latch) on the door or lid, be sure to make
the spring lock unusable before you discard the old appliance. This will
prevent it from becoming a death trap for a child.
3
General safety
WARNING —This appliance is intended to be used in household
and similar applications such as
-staff kitchen areas in shops, offices and other working environments;
-farm houses and hotels, motels and other residential type environments;
-bed and breakfast type environments;
-catering and similar non-retail applications.
WARNING — Do not store explosive substances such as aerosol cans
with a flammable propellant in this appliance.
WARNING — If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
WARNING — Keep ventilation openings, in the appliance enclosure or in
the built-in structure, clear of obstruction.
WARNING — Do not use mechanical devices or other means to
accelerate the defrosting process, other than those recommended by the
manufacturer.
WARNING — Do not damage the refrigerant circuit.
WARNING — Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the type recommended
by the manufacturer.
WARNING — The refrigerant and insulation blowing gas are flammable.
When disposing of the appliance, do so only at an authorized waste
disposal centre. Do not expose to flame.
WARNING —When positioning the appliance, ensure the supply cord is
not trapped or damaged.
WARNING —Do not locate multiple portable socket-outlets or portable
power supplies at the rear of the appliance.
Re lacing the illuminating lam s
WARNING—The illuminating lamps must not be replaced by the user! If
the illuminating lamps is damaged, contact the customer helpline for
assistance. This warning is only for refrigerators that contain illuminating
lamps.
Refrigerant
The refrigerant isobutene (R 00a) is contained within the refrigerant circuit of
the appliance, a natural gas with a high level of environmental compatibility,
which is nevertheless flammable. During transportation and installation of the
appliance, ensure that none of the components of the refrigerant circuit
becomes damaged.
The refrigerant (R 00a) is flammable.
4
WARNING — Refrigerators contain refrigerant and gases in the insulation.
Refrigerant and gases must be disposed of professionally as they may cause
eye injuries or ignition.Ensure that tubing of the refrigerant circuit is not
damage prior to proper disposal.
WARNING: Risk of fire/flammable materials
If the refrigerant circuit should be damaged:
-Avoid opening flames and sources of ignition.
-Thoroughly ventilate the room in which the appliance is situated.
It is dangerous to alter the specifications or modify this product in any way.
Any damage to the cord may cause a short circuit, fire, and/or electric shock.
Electrical safety
1.The power cord must not be lengthened.
2. Make sure that the power plug is not crushed or damaged. A crushed or
damaged power plug may overheat and cause a fire.
3. Make sure that you can access the main plug of the appliance.
4. Do not pull the main cable.
5. If the power plug socket is loose, do not insert the power plug. There is a risk
of electric shock or fire.
.You must not operate the appliance without the interior lighting lamp cover.
7.The fridge is only applied with power supply of single phase alternating
current of 220~240V/50Hz. If fluctuation of voltage in the district of user is so
large that the voltage exceeds the above scope, for safety sake, be sure to
apply A.C. Automatic voltage regulator of more than 350W to the fridge. The
fridge must employ a special power socket instead of common one with other
electric appliances. Its plug must match the socket with ground wire.
Daily use
Do not store flammable gas or liquids in the appliance, There is a risk of an
explosion.
Do not operate any electrical appliances in the appliance (e.g. electric ice
cream makers, mixers etc.).
When unplugging always pull the plug from the mains socket, do not pull
on the cable.
Do not place hot items near the plastic components of this appliance.
Do not place food products directly against the air outlet on the rear wall.
Store pre-packed frozen food in accordance with the frozen food
manufacture’s instructions.
The appliances manufactures storage recommendations should be strictly
adhered to. Refer to relevant instructions for storage.
Do not place carbonated or fizzy drinks in the freezer compartment as it
a Gas Work
this appliance.
It is hazardous for
involve removal of covers.
Authorization for hydrocarbon refrigerants
In
Authorized Queensland the
or repairs which
to carry out servicing
to service
anyone other than an Authorized Service Person
MUST hold
Service Person
5
creates pressure on the container, which may cause it to explode,resulting
in damage to the appliance.
Frozen food can cause frost burns if consumed straight from the freezer
compartment.
Do not place the appliance in direct sunlight.
Keep burning candles,lamps and other items with naked flames away from
the appliance so that do not set the appliance on fire.
The appliance is intended for keeping food stuff and/or beverages in
normal household as explained in this instruction booklet .You should take
care when move it as the appliance is heavy.
Do not remove nor touch items from the freezer compartment if your hands
are damp/wet, as this could cause skin abrasions or frost/freezer burns.
Never use the base,drawers, doors etc. to stand on or assupports.
Frozen food must not be refrozen once it has been thawed out.
Do not consume ice popsicles or ice cubes straight from the freezer as this
can cause freezer burn to the mouth and lips.
To avoid items falling and causing injury or damage to the appliance, do
not overload the door racks or put too much food in the crisper drawers.
caution!
Care and cleaning
Before maintenance, switch off the appliance and disconnect the mains
plug from the mains socket.
Do not clean the appliance with metal objects, steam cleaner, ethereal oils,
organic solvents or abrasive cleansers.
Do use a plastic scraper instead of a sharp objects to remove frost from
the appliance.
Installation Im ortant!
For electrical connection carefully, follow the instructions given in this
manual. Unpack the appliance and check if there are damages on it.
Do not connect the appliance if it is damaged. Report possible damages
immediately to the place you bought it. In this case retain packing.
It is advisable to wait at least four hours before connecting the appliance to
allow the oil to flow back in the compressor.
Adequate air circulation should be around the appliance, lacking this leads
to overheating. To achieve sufficient ventilation, follow the instructions
relevant to installation.
Wherever possible the back of the product should not be too close to a wall
to avoid touching or catching warm parts(compressor, condenser) to
prevent the risk of a fire, follow the instructions relevant to installation.
The appliance must not be locate close to radiators or cookers.
Make sure that the mains plug is accessible after the installation of the
appliance.
Service
Any electrical work required to do the servicing of the appliance should be
carried out by qualified electrician or competent person.
This product must be serviced by an authorized Service
Center, and only genuine spare parts must be used.
1)If the appliance is Frost Free.
2)If the appliance contains freezer compartment.
Note: Children aged from 3 to 8 years are allowed to load and unload
refrigerating appliances.(This clause applies only to the EU region.)
7
Before using the appliance for the first
time, you should be informed of the
following tips.
Warning!
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not castors, should
be only used for forward or backward
movement. Moving the refrigerator
sideways may damage your floor and the
rollers.
Ventilation of a liance
In order to improve efficiency of
the cooling system and save
energy, it is necessary to
maintain good ventilation around the
appliance for the dissipation of heat. For
this reason, sufficient clear space should
be available around the refrigerator.
Suggest:It is advisable for there to be
50-70mm of space from the back to the
wall, at least 100mm from its top, at least
50mm from its side to the wall and a clear
space in front to allow the doors to open
130°. As shown in follow diagrams.
Note:
This appliance performs well within the
climate class from SN to T showed in the
table below. It may not work properly if
being left at a temperature above or below
the indicated range for a long period.
Climate class Ambient tem erature
SN +10°C to +32°C
N +16°C to +32°C
ST +16°C to +38°C
T +16°C to +43°C
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight,
rain or frost. Stand the appliance away
Installing your new a liance
100mm
8
from heat sources such as stoves, fires or
heaters.
Leveling of a liance
For sufficient leveling and air circulating
in the lower rear section of the appliance,
the bottom feet may need to be adjusted.
You can adjust them manually by hand or
by using a suitable spanner.
To allow the doors to self-close, tilt the
top backwards by 10-15mm.
Note:
If required you may lay the refrigerator
on its back in order to gain access to the
base, you should rest it on soft foam
packaging or similar material to avoid
damaging the backboard of the
refrigerator.
There is no need to install these
accessories under normal usage.
Only under the extreme circumstances,
that is opening the door about 90 degree,
this refrigerator may take risk of tipping.
Then rubber supporting pad should be
fastened to the lower base cover to steady
this appliance.
9
1. Tilt appliance to find screw hole on the
left of lower base cover.
2. Put screw into the hole of rubber
supporting pad.
3. Make screw in alignment with the hole
on lower base cover. Fasten rubber
supporting pad to the base cover firmly by
a cross screwdriver (self-provided).
①
②
③
Reversing the door
The side at which the door opens can be
changed, from the right side (as supplied)
to the left side if required.
Warning! When reversing the door, the
appliance must not be connected to the
mains, Ensure that the plug is removed
from the mains socket
Not rovided
Wrench(8mm) Philips Screwdriver
Thin-blade
screwdriver Monkey wrench
Additional arts (in the lastic bag)
Allen Wrench(4mm)
lower base cover
cross screwdriver
rubber supporting pad
screw
10
Left Hinge Left Hinge Cover
Left Stop Block*2 Left Door Stopper*2
Note: If required you may lay the
refrigerator on its back in order to gain
access to the base, you should rest it on
soft foam packaging or similar material to
avoid damaging the backboard of the
refrigerator. To reverse the door, the
following steps generally recommended.
1. Stand the refrigerator upright. Open the
door to remove all door racks (to avoid
damage) and then close the door.
Caution!
Please slightly squeeze the door rack
from two sides toward center and inside
of door rack, and then move it upward
when taking out the upper rack and
lower rack.
2. Remove right upper hinge cover
①
top of the cabinet. Remove the 3 screws
②
which are used for fixing the right
upper hinge part (see the picture below)
and take down the upper hinge parts
③
3. Remove screw cover from the
left-front corner of cabinet with
thin-blade screwdriver and install screw
cover-right to the right front corner. Put
the upper hinge cover(right) and upper
hinge part (right) into the plastic bag.
4. Remove the upper door from the
middle hinge by carefully lifting the door
straight up.
5. Place the upper door on a smooth
surface with its panel upwards.
Loose screw
③
and take down part
②
and part
①
,Install replacement
door stopper-left provided (in the
Left Middle Hinge
Inhaltsverzeichnis
Andere Hisense Kühlschrank Handbücher
Hisense
Hisense RQ563N4SWI1 Montageanleitung
Hisense
Hisense H620BS-WD Montageanleitung
Hisense
Hisense RB412N4AI1 Montageanleitung
Hisense
Hisense RS818N4TCE Montageanleitung
Hisense
Hisense RB296F4AW1 Montageanleitung
Hisense
Hisense RB327N4WB1 Montageanleitung
Hisense
Hisense RR17D6ABE Bedienungsanleitung
Hisense
Hisense HR6BMFF320 Montageanleitung
Hisense
Hisense RR154D4AW2 Montageanleitung
Hisense
Hisense RT318N4ABN Montageanleitung
Hisense
Hisense MTZ60235FF Montageanleitung
Hisense
Hisense RF20N6ASE Montageanleitung
Hisense
Hisense RB14NIASD Montageanleitung
Hisense
Hisense FUV126D4AW1 Montageanleitung
Hisense
Hisense Fridgemaster mc55244d Bedienungsanleitung
Hisense
Hisense RL170D4BCE Montageanleitung
Hisense
Hisense RQ515N4AB1 Montageanleitung
Hisense
Hisense RS677N4BIE Montageanleitung
Hisense
Hisense RF540N4AI1 Montageanleitung
Hisense
Hisense RB327N4AD2 Montageanleitung
Beliebte Kühlschrank Handbücher anderer Marken
Bonnet Neve
Bonnet Neve SKYVIEW PLUS Bedienungsanleitung
Zanussi Electrolux
Zanussi Electrolux ZERB 8441 Bedienungsanleitung
Sharp
Sharp SJ-BA31IEXW2-EU Bedienungsanleitung
CORBERO
CORBERO CC2300MCW Bedienungsanleitung
KitchenAid
KitchenAid 2205264 Bedienungsanleitung
Stengel
Stengel KU 1101 A++ Bedienungsanleitung
