Hisense RR33D6ABE Montageanleitung

RR33D6ABE

First use and Installation - - - - - - - - - - - - - 5

Description of the appliance - - - - - - - - - - -7

Brief introduction - - - - - - - - - - - - - - - - - - - 2

Operation - - - - - - - - - - - - - - - - - - - - - - - - 7

Helpful hints and tips - - - - - - - - - - - - - 9

Cleaning and care - - - - - - - - - - - - - - 10

Troubleshooting - - - - - - - - - - - - - - - -12

Disposal of the appliance - - - - - - - - - 13

Reversing the door- - - - - - - - - - - - - - 11

Thank you for choosing our products. We

are sure you will find your new appliance a

pleasure to use. Before you use the

appliance, we recommend that you read

through these instructions carefully, which

provides details about its usage and

functions.

Please ensure that all people using this

appliance are familiar with its operation

and safety features. It is important that you

install the appliance correctly and pay

attention to the satety instructions carefully.

We recommend that you keep this users

manual with the appliance for future

reference and retain it for any future users.

If you feel that the appliance is not

operating correctly, please check the

trouble shooting page for assistance. If

still in doubt contact the customer service

help line for assistance

It is important to use your appliance

that you follow

General safety and daily use

the guidelines below.

Store any food in accordance with the

storage instructions from the manufacturer.

Don’t try to repair the appliance yourself. It

is dangerous to alter the specifications or

modify this product in any way. Any

damage to the cord may cause short

circuit, fire or electric shock.

Don’t place hot items near the plastic

components of this appliance.

Frozen food must not be refrozen once it

has been thawed out.

Don’t store bottled or canned drinks

(especially carbonated drinks) in the

chiller compartment. Bottles and cans

may explode.

To avoid items falling and causing injury or

damage to the appliance, do not overload

the door racks or put too much food on the

shelves.

Important safety instructions - - - - - - - - - - - 2

at 1-877-465-3566

It's recommended

safely.

We recommend that you wait 4 hours with

the unit upright, before connecting the

appliance to allow the refrigerant to flow

back into the compressor.

WARNING-Do not use mechanical devices

or other means to accelerate the defrosting

process, other than those recommended by

the manufacturer.

WARNING-Do not damage the refrigerant

circuit.

WARNING-If the power cord is damaged, it

must be replaced by the manufacturer, its

service agent or similarly qualified persons

in order to avoid a hazard.

WARNING-Keep ventilation openings in the

appliance enclosure, or in the built-in

structure, clear of obstruction.

WA R N I N G - W h e n disposing of t h e

appliance, do so only at an authorized waste

disposal center. Do not expose to flame.

WARNING-Do not store explosive or

substances such as aerosol cans with a

flammable propellant in this appliance.

Safety for children and infirm persons

This appliance is not intended for use

by persons (including children) with

reduced physical, sensory or mental

capabilities, or a lack of experience and

knowledge, unless they have been given

supervision or instruction concerning the use

of the appliance by a person responsible for

their safety. Children should be supervised

to ensure that they do not play with the

appliance.

Keep all packaging away from children to

avoid risk of suffocation.

Protect children from being scalded by

touching the very hot compressor at the

rear bottom of the appliance.

Don’t place items on top of the appliance

as this could cause injury should they fall

off.

Never allow children to play with the

appliance by hanging or standing over or

on the door, racks, and shelves etc.

WARNING

take off the doors. Leave all the shelves in

place so that children may not

easily climb inside.

Safety about electricity

To avoid the risks that are always

present when using an electric

appliance, we recommend that you pay

more attention to the instructions about

electricity below.

Unpack the appliance and check through

the appliance. Should any damage be

evident, don’t plug in the appliance, but

contact the shop immediately from which

you purchased it. Keep all packing

materials in this case.

The appliance must be supplied with single

phase alternating current of 115V/60Hz.

The main plug must be accessible when

the appliance is installed.

This appliance must be grounded. Do not

use ungrounded (two prong) adapters.

-This appliance is fitted with a ground plug in

accordance with local standards. The

ground plug should be suitable for use in all

houses fitted with sockets in accordance

with current specifications. If the outlet isn’t

suitable for the grounded plug, do not cut off

the ground prong. Instead, please contact a

qualified, registered electrician to install the

correct outlet.

Do not use extension cords or multiple

sockets which could cause overloading of

wiring circuits and could cause a fire,

Always plug your appliance into its own

individual electrical socket which has a

voltage rating that matches the rating plate.

Make sure that the plug is not squashed or

damaged. Damage may cause short

circuit, electric shock or overheat and even

cause a fire.

Do not insert the main plug and use the

appliance if the socket is broken. There is

a risk of electric shock or fire.

Switch off the appliance and disconnect it

from the main power before you clean or

move it.

When disposing of the appliance,

Never unplug the appliance by pulling on

the electrical cord. Always grip the plug

firmly and pull straight out from the socket

to prevent damaging the power cord.

Any electrical component must be replaced

or repaired by a qualified electrician or

authorized service engineer.

Only genuine parts should be

WARNING-Do not use electrical appliances

inside the food storage compartments of the

appliance, unless they are of the type

recommended by the manufacturer.

Check the compressor label on the rear of

the appliance to see which refrigerant is

used for your appliance.

If the appliance contains iso-butane

( R 6 0 0 a ) r e f r i g e r a n t , w h i c h i s

environmentally friendly but flammable,

ensure that tubing of the refrigerant circuit

is not damaged during transportation and

installation to avoid risk of fire caused by

leaking refrigerant.

Keep burning candles, lamps and other

items with naked flames and sources of

ignition away from the appliance and

ventilate the room thoroughly to avoid

the risk of fire and eye injury should

any leakage of refrigerant (R600a) exist.

Do not store products which contain

flammable propellants (e.g. spray cans or

explosive substances) in the appliance.

The appliance contains a small

quantity of refrigerant (R600a) in the

The refrigerant and risk of fire

refrigerant circuit.

Hisense service

used.

Warning! Before installing, read the

instruction carefully for your safety

and correct operation of the appliance.

Stand your appliance in a dry place to

avoid high mosture.

Appliances must not be exposed to rain.

Sufficient air must be allowed to circulate in

the low rear section of the appliance, as

poor air circulation can affect performance.

should be positioned away from

heat sources such as heaters and direct

Important!

For this reason,

space should be

available around the . It is

advisable for there to be

separating the back of the to

the wall at least of space

on its two of over

from its top and a clear space

in front to allow the doors to open 180°.

It is necessary to have good

ventilation around the refrigerator to allow for

the dissipation of heat, high efficiency, and

low power consumption.

sufficiently cleared

refrigerator

sides, a height

First use and Installation

Cleaning before use

Before using the appliance for the first

time, wash the interior and all internal

accessories with lukewarm water and

some neutral soap so as to remove the

typical smell of a brand new product, then

dry thoroughly.

Important! Do not use detergents or

abrasive powders, as these will damage the

finish.

Installation Positioning

This appliance performs well within the

Ambient temperature from 55 deg F /

12.8℃ to 110 deg F / 43.3

It may not work properly if being left at a

temperature above or below the indicated

range for a long period.

℃.

State of California Proposition 65 Warnings:

WARNING:This product contains one or more chernicals known to the State of California to

cause cancer.

WARNING:This product contains one or more chernicals known to the State of California to

cause birth defects or other reproductive harm.

Keep the appliance out of direct sunlight

rain or frost. Stand the appliance away

from heat sources such as stoves, fires or

heaters.

Installing the rubber anti-tip pad

If there is a rubber anti-tip pad and

a screw provided in a plastic bag with

your appliance ,you must install these

accessories according to the following

procedure.

lo wer base cover

1.Tilt appliance to find screw hole on the

left of lower base cover.

75 mm / 3 inches

100 mm / 4 inches 100 mm /

4 inches

Appliances

sunlight.

75 mm / 3 inches

100 mm / 4 inches

Note:

There is no need to install these accessories under

normal usage, Only under the extreme circumstance,

cabinet empy while load on door with local mass of

10 kg / 22 pounds and opening the door about 90

degree, this refrigerator may take risk of tipping, Then

anti-tip should be fastened to the lower base cover to

steady this appliance.

rubber supporting pad

scr e w

2.Put screw into the hole of rubber

supporting pad.

Leveling

The appliance should be level in order to

eliminate vibration. To make the appliance

level, it should be upright and both

adjusters should be in firm contact with

the floor. You can adjust the level by

screwing in or out to the appropriate

level from the front (use your fingers or a

suitable spanner).

Electrical connection

Caution! Any electrical work required to

install this appliance should be carried out

by a qualified or competent person.

Warning! This appliance must be grounded.

The manufacture declines any liability

should these safety measures not be

observe.

3.Make screw in alignment with the hole

on lower base cover . Fasten rubber

supporting pad to the base cover firmly

by a phillips s crew driver (not included).

phillips screw drawer

High ambient temperatures (e.g. on hot

summer days) and a colder setting

(position 6 to 8) on the temperature

regulator can cause the compressor to

run continuously or even non-stop!

Setting “0 ” means no cooling

Turning the temperature control to "0"

position stops the cooling cycle, but

does not shut off the power to the

refrigerator.

T u r n i n g c l o c k w i s e i n d i r e c t i o n

. If the unit is

unplugged, power lost, or turned off, you

must wait 3 to 5 minutes before restarting

the unit. If you attempt to restart before

this time delay, the refrigerator will not

start.

Setting “8”(end-stop)

Normally we advise you select setting of

3 or 4, if you want the temperature

warmer or colder please turn the knob to

lower or higher setting accordingly.

Insert the plug

into the

The temperature

selector knob is located on the side

of the chiller compartment.

can lead to

the more energy efficiency.

Reason: when the ambient

temperature is high, the

c o m p r e s s o r m u s t r u n

continuously to maintain the

l o w t e m p e r a t u r e i n t h e

appliance.

1.Cabinet

2. doorChill Compartment

Defrosting tray

Removable shelf

Crisper box cover part

Lower door bin

Small door bin

Refrigerator door

.Temperature regulator

Bottle holder

Description of the appliance

Operation

Note: Due to continual modification of our products, your refrigerator may be slightly different

from this instruction Manual, but its functions and usage methods remain the same.

Starting up and temperature regulation

Important!

CAUTION: Wait for 4 hours

with the unit upright, before connecting the

appliance to allow the refrigerant to flow

back into the compressor.

with earth ground. electrical outlet

turns the cooling cycle on

Setting "8" is the coolest possible temperature

setting.

Raising the temperature settingAs the

temperature setting is decreased, it's likely that

more energy will be consumed.

For safe food preservation, a

temperature of 39 deg F or less must be

maintained in the refrigerator

Warning:

Remove and install the door shelf

Remove the door shelf

press inwardly

Install the door shelf

Warning:The door shelf must not removed

and installed by the user! If the door shelf

is damaged ,contact the customer helpline

for assistance .To replace the door shelf,

the below steps can be followed:

Firstly tilt the left side of the door shelf,

and make sure the notch has been

fastened to the door .Then press the

right side inwardly ,pushing it down into

place.

Press the right side of the door shelf

inwardly ,while holding the left side .

When the notch of the shelf has been

detachesd from the refrigerator door,

remove the rack obliquely upwardly .

Using your appliance

Your appliance has

Door bins

Suitable for the storage of canned liquid,

bottled drinks and packaged food, etc.

Do not place too many heavy things in

the bins.

Shelf in Refrigerator compartment

There are shelves in the refrigerator

compartment and they can be taken out to

be cleaned.

Chiller compartment

This is a low temperature

compartment intended specifically for

the

the features shown below,

which are described in the "Description" section

of this manual. Please note these usage tips and

instructions.

temporary storage of frozen items.

Helpful hints and tips

Energy saving tips

We recommend that you follow the tips

below to save energy.

Hints for fresh food refrigeration

Hints for refrigeration

Hints for the storage of frozen food

Switching off your appliance

If the appliance needs to be switched off for

an extended period, the following steps

should be taken prevent mould on the

appliance.

1. Remove all food.

3. Clean and dry the interior thoroughly.

4. Ensure that all the doors are wedged

open slightly to allow air to circulate.

Try to avoid keeping the door open for

long periods in order to conserve energy.

Ensure the appliance is away from any

sources of heat (Direct sunlight, electric

oven or cooker etc).

Don’t set the temperature colder than

necessary.

Don’t store warm food or evaporating

liquid in the appliance.

Place the appliance in a well ventilated,

humidity free, room. Please refer to the

instructions on installing your new

appliance.

T h e d i a gr a m s h o w s t h e c o r r e c t

combination for the shelves, designed to

be the most energy efficient configuration.

Do not place hot food directly into the

refrigerator or ,

as the internal temperature will increase

resulting in the compressor having to work

harder and will consume more energy.

Chiller compartment

Cover or wrap the food particularly if it has

a strong flavor.

Place food properly so that air can

circulate freely around it.

Meat (All Types) Wrap-ped in PVDC

(plastic) wrap:

Wrap and place on the shelf. Always

follow food storage times and use by

dates suggested by manufacturers.

Cooked food, cold dishes, etc.:

Dishes should be covered and may be

placed on any shelf.

Fruit and vegetables:

Fruit and vegetables should be wrapped

and stored under the Crisper box cover

part.

Butter and cheese:

Be wrap in airtight foil or plastic film wrap.

Milk bottles:

Bottles should have a lid and be stored in

the door racks.

Once defrosted, food will deteriorate

rapidly and should not be re-frozen. Do

not exceed the storage period indicated

by the food manufacturer.

2. Remove the plug from the electrical outlet.

Only store frozen items temporarily in the

Chiller compartment. This compartment is

not intended for freezing, or long term

storage of frozen items.

Cleaning and care

Cleaning and Care

The appliance interior, including interior

accessories, should be cleaned regularly.

The refrigerator should be cleaned and

maintained at least every two months.

Warning! Danger of electrical shock!

The appliance should not be connected to

the during cleaning.

Before cleaning, switch the appliance

off and remove the plug from the

or switch off or turn out the circuit

Important!

Never clean the appliance with a steam

cleaner. Moisture could accumulate in

electrical components,

Hot vapors can lead to the damage of

plastic parts.

Ethereal oils and organic solvents can

attack plastic parts, e.g. lemon juice or the

juice from orange peel, butyric acid,

cleanser that contain acetic acid.Do not

allow such substances to come into

contact with appliance parts.

Do not use any abrasive cleansers.

Clean the appliance and the interior

accessories with a cloth and lukewarm

water. Commercially available dish

washing detergents may also be used.

Remove the food from the appliance

before cleaning. Store in a cool

place, well covered.

After everything is dry place appliance

back into service.

A frost layer

is more

than thick,

defrost.

Defrosting

Why defrosting

After cleaning wipe with fresh water and

clean dish cloth.

Warning!

defrosting tray before

You need to lift the

defrosting, take the food out; take the

ice tray out or put it into the refrigerator

chamber temporarily, then set the knob

o f t h e t e m p e r a t u r e r e g u l a t o r t o

position “0”(where the compressor will

stop working) , leave the door of the

refrigerator open until ice and frost

Wipe off the water with

soft cloth. To speed up the process of

defrosting, you may put a bowl of warm

water (about ) into

the Chiller compartment, and

scrape away the ice and frost with a

defrosting spatula. After doing so, be

sure to set the knob of the temperature

regulator to the original position.

It is not advisable to heat the

Chiller compartment directly with hot

water or a hair dryer while defrosting to

avoid deformation of the inner case.

It is also not advisable to scrape off ice

and frost or separate food from the

containers which have been congealed

together with the food with sharp tools

or wooden bars, so as not to damage

the inner casing.

power supply

electrical

outlet,

circuit breaker or fuse.

may form inside the refrigerator

after continuous usage. If the frost

10mm (3/8 inches) you should

Defrosting is operated manually.Before

dissolves thoroughly, and accumulates in

the drip tray.

50 deg C / 120 deg F

you remove it.

Inhaltsverzeichnis

Sprachen:

Andere Hisense Kühlschrank Handbücher

Hisense

Hisense RD-60WC1STA/USE-002 Bedienungsanleitung

Hisense

Hisense RS-47WL4SIB/CLA1-002 Montageanleitung

Hisense

Hisense RF20N6ASE Montageanleitung

Hisense

Hisense RF225C3CSEI Montageanleitung

Hisense

Hisense HQD20 Series Bedienungsanleitung

Hisense

Hisense 250 Series Montageanleitung

Hisense

Hisense MQ79394FFS Montageanleitung

Hisense

Hisense RT417N4DC1 Montageanleitung

Hisense

Hisense HRM260N6TSE Montageanleitung

Hisense

Hisense RT286N4ABN Montageanleitung

Hisense

Hisense RF540N4WFE Montageanleitung

Hisense

Hisense HRCD610TS Montageanleitung

Hisense

Hisense RS694N4BCE Montageanleitung

Hisense

Hisense RS696N4IC1 Montageanleitung

Hisense

Hisense HRVF240 Montageanleitung

Hisense

Hisense RD-39DR4SAA/CPA1 Bedienungsanleitung

Hisense

Hisense FMN544I20S Montageanleitung

Hisense

Hisense RF702N4IS1 Montageanleitung

Hisense

Hisense RD-50WC4SYS Bedienungsanleitung

Hisense

Hisense RF15N1BSD Bedienungsanleitung

Hisense

Hisense H299BME Bedienungsanleitung

Hisense

Hisense H700SS-IDB Montageanleitung

Hisense

Hisense RS-09DC4S Series Bedienungsanleitung

Hisense

Hisense KT 117 A +++ Montageanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung