Hitachi CG 40EAF (LP) Gebrauchsanweisung

[ SAME FEATURES AS THE CONVENTIONAL MODELS ]

Adopts a backpack made of resin

Adopt a soft belt (strap)

PRODUCT NAME

Hitachi Engine Brushcutter

Models CG 40EAF (LP), CG 40EBF (L)

The engine brushcutters (backpack type) for Europe and Asia are restyled.

The specifications for Europe adopt a backpack frame popular in Asia that is made of resin.

Moreover, Asian specifications are set by increasing engine displacement to a much higher level.

With the new Models CG 40EAF (LP) and CG 40EBF (L), we aim to enhance the market share of the Hitachi

engine brushcutter (backpack type) series.

Dec. 2009

Cutting grass:

• Cutting the grass in fields.

• Cutting the undergrowth in orchards.

• Cutting the weeds along roads.

• Cutting other general kinds of grass.

MARKETING OBJECTIVE

APPLICATIONS

SELLING POINTS

Sales Division

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

CG 40EBF (L)

REMARK:

• For more information about HANDLING INSTRUCTIONS, visit our website at:

http://www.hitachi-koki.com/manual_view_export/

• Throughout this TECHNICAL DATA AND SERVICE MANUAL, a symbol(s) is(are) used in the place of

company name(s) and model name(s) of our competitor(s). The symbol(s) utilized here is(are) as follows:

Competitors

Symbols Utilized

Company Name Model Name

A HUSQVARNA 142 RB

B KAAZ VRS 400

CONTENTS

Page

SELLING POINTS ------------------------------------------------------------------------------------------------------------- 1

SPECIFICATIONS ------------------------------------------------------------------------------------------------------------- 2

COMPARISON WITH SIMILAR PRODUCTS--------------------------------------------------------------------------- 3

PRECAUTIONS ON SALES PROMOTION ----------------------------------------------------------------------------- 4

1. Safety Instructions ---------------------------------------------------------------------------------------------- 4

-1-

Adopts a backpack made of resin

Thanks to a plastic frame ergonomically designed to accommodate the profile of the user's back, the user

can use the brushcutter without any concern about wearing the backpack.

Adopts a soft belt (strap)

Shoulder-fit soft straps and a chest belt prevent the backpack from sliding away from the user's shoulders

during cutting operation.

SELLING POINTS

Backrest profile

Soft belt

Plastic frame Chest belt

-2-

Model CG 40EAF (LP) CG 40EBF (L)

Destination Europe Asia

Engine type 2-cycle, air-cooled gasoline engine

Engine displacement 39.8 cm3

Cylinder size

(inner diameter x stroke) ĭ39.8 x 32 mm

Applicable fuel Gasoline-oil mixture

Gasoline-oil ratio 25 (gasoline): 1 (2-cycle motor oil)

Fuel tank capacity 1,000 r50 cm31,200 r50 cm3

Max. power output 1.20 kW (1.65 PS) / 7,500 min-1 1.30 kW (1.78 PS) / 7,500 min-1

Idling speed 2,750 r250 min-1

Startup Recoil starter type

Ignition Fly-wheel magnet type

Ignition plug NGK BPMR6A

Carburetor Diaphragm (with primer pump) Float

Stopping Sliding switch

Throttle lever Trigger type (Interlocked) Stationary type (L-shaped)

Carrying Carrying on both shoulders with shoulder straps

Handle Loop handle

Cutter blades 3 blades (ĭ255) 2 blades (ĭ305)

Blade rotation Counterclockwise when viewed from the top

Power transmission Via automatic centrifugal clutch

Backpack

(L x W x H) 394 x 326 x 430 (mm) 383 x 326 x 430 (mm)

Dimensio

ns Handle shaft

(full length) 2,381 mm 2,075 mm

Dry weight 10.7 kg 9.6 kg

Front 0.6 m/s21.0 m/s2

Idling

Rear 0.3 m/s20.5 m/s2

Front 6.7 m/s27.5 m/s2

Vibration

level

(ISO

7916) Racing

Rear 4.0 m/s27.0 m/s2

Noise level (2000/14/EC) 112 dB(A) 112 dB(A)

Accessories

Tool bag, Allen wrench (4), spanner (8 x 10), box wrench (17 x 19) with

plus, locking device (split pins), cord press (3 for EAF; 2 for EBF), safety

goggles (EAF only), fuel-mixing can (EBF only), cutter blade cover (EAF

only), cover guard (EAF only), Instruction manual (A5)

SPECIFICATIONS

-3-

(Superior specifications: )

Maker HITACHI HITACHI

Model CG 40EAF (LP) ACG 40EBF (L) B

Engine

displacement cm339.8 41.5 39.8 42.7

Max. power output kW 1.2 1.3 1.3 1.27

Secondary exhaust

regulation ʊConformed Not conformed Not conformed Not conformed

Fuel tank capacity cm31,000 1,000 1,200 1,300

Carburetor ʊDiaphragm type Diaphragm type Float type Float type

Backpack

(full length) mm 394 ʊ383 350

Backpack

(full width) mm 326 ʊ326 330

Backpack

(full height) mm 430 ʊ430 430

Major dimensions

Handle shaft

(full length) mm 2,381 ʊ2,075 2,320

Dry Weight kg 10.7 11.5 9.6 10.5

COMPARISONS WITH SIMILAR PRODUCTS

-4-

1.Safety Instructions

In the interest of promoting the safest and most efficient use of the Models CG 40EAF (LP) and CG 40EBF

(L) Engine Brushcutters by all of our customers, it is very important that when concluding a sale that the

salesperson carefully ensure that the buyer seriously recognizes the importance of the Handling

Instructions, and fully understands the precautions listed on the Caution Plate attached to each tool.

Salespersons should instruct customers to read the instruction manual for how to handle, maintain, inspect

and store the tool. In particular, instruct customers to periodically check the product. The persons in charge

of sales should take all possible measures to assure the expendible supply system and the repairing

system.

A. Handling Instructions

Although every effort is made in each step of design, manufacture, and inspection to provide protection

against safety hazards, the dangers inherent in the use of any power tool cannot be completely eliminated.

Accordingly, the Handling Instructions list general precautions and suggestions on the use of gas-powered

tools, and specific precautions and suggestions on the use of backpack engine brushcutters to enhance the

safe, efficient use of the tool by customers. Salespersons must be thoroughly familiar with the Handling

Instructions in order to offer appropriate guidance to the customer during sales promotion activities.

B. Caution Plate

The CG 40EAF (LP) and CG 40EBF (L) units are each provided with a Caution Plate (illustrated below) that

lists basic safety precautions on use of these tools. Carefully ensure that the customer fully understands

and follows these precautions before using the tool.

PRECAUTIONS ON SALES PROMOTION

-5-

C. Specific Instructions for Customers

(1) Proper startup and stopping procedures

Instruct the user to always perform the proper startup and stopping procedures. In particular, explain the

difference in startup procedure between "when the engine is cold" and "when the engine is warm," and

about setting the throttle lever to the Idling position to start the engine.

(2) Proper fuel mixture

The engine brushcutter comes equipped with a 2-cycle gasoline engine. Instruct the user to always

use the proper fuel mixture of 25 parts of gasoline to 1 part of 2-cycle motor oil. Also instruct the user to

only prepare the required amount of fuel mixture, since it is apt to quickly deteriorate and cannot be

stored for a long time.

(3) Proper storage

When the engine brushcutter is to be stored for a long time without being operated, instruct the user to

always empty the fuel tank by idling the engine until it stops, thereby burning up all fuel in the carburetor.

Any residual gasoline left in the carburetor will evaporate over time and the oil component will clog the

fuel line. In extreme cases, the engine may not start when used the next time.

(4) Exclusive use of genuine cutter blades

Instruct the user to only use genuine cutter blades supplied by Hitachi Koki Co., Ltd.. The use of other

blades may not only reduce brushcutter service life, but could also cause unexpected accidents.

For repair (disassembly and assembly), refer to the parts list in the instruction manual supplied with

the product.

Andere Handbücher für CG 40EAF (LP)

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hitachi Freischneider Handbücher

Hitachi

Hitachi CG 25EUS L Bedienungsanleitung

Hitachi

Hitachi CG 31EBS Bedienungsanleitung

Hitachi

Hitachi CG 23EA (SL) Bedienungsanleitung

Hitachi

Hitachi CG 40EAF (LP) Bedienungsanleitung

Hitachi

Hitachi CG40EF Bedienungsanleitung

Hitachi

Hitachi CG 31EBS Bedienungsanleitung

Hitachi

Hitachi CG40EASP Bedienungsanleitung

Hitachi

Hitachi CG 40EAS Bedienungsanleitung

Hitachi

Hitachi CG-HTB Bedienungsanleitung

Hitachi

Hitachi CG-HTB Bedienungsanleitung

Hitachi

Hitachi CG-PE Bedienungsanleitung

Hitachi

Hitachi CG-PE Bedienungsanleitung

Hitachi

Hitachi CG 23ECP (SL) Bedienungsanleitung

Hitachi

Hitachi CG 40EAF (LP) Bedienungsanleitung

Hitachi

Hitachi CG 31EBSP Bedienungsanleitung

Hitachi

Hitachi CG 40EASP Bedienungsanleitung

Hitachi

Hitachi CG 40EAS Bedienungsanleitung

Hitachi

Hitachi CG-MCB Bedienungsanleitung

Hitachi

Hitachi CG 40EBF Bedienungsanleitung

Hitachi

Hitachi CG 23EC (SL) Bedienungsanleitung

Hitachi

Hitachi CG 40EAF (LP) Bedienungsanleitung

Hitachi

Hitachi CG-GT Bedienungsanleitung

Hitachi

Hitachi CG 40EAF (LP) Bedienungsanleitung

Beliebte Freischneider Handbücher anderer Marken

Echo

Echo SRM-265ES Series Montageanleitung

Victus

Victus VB 260 L Bedienungsanleitung

Solo

Solo 128L Bedienungsanleitung

Stihl

Stihl FS 410 C-M Bedienungsanleitung

CanyCom

CanyCom CMX 253 Bedienungsanleitung

Makita

Makita EBH340U Bedienungsanleitung

EGO

EGO BCA1220 Bedienungsanleitung

VARO

VARO Powerplus POWXG3016 Bedienungsanleitung

Stihl

Stihl FS 510 C Bedienungsanleitung

Lawn-King

Lawn-King FW35E Bedienungs- und Montageanleitung

Husqvarna

Husqvarna 553RBX Bedienungsanleitung

Ryobi

Ryobi RBC430SBS Bedienungsanleitung

RedMax

RedMax EXtreme EXZ2401S-BC Betriebsanleitung

Vito Agro

Vito Agro VIR43E Bedienungsanleitung

Black & Decker

Black & Decker 82267 Bedienungsanleitung

Agrimate

Agrimate AM-3000-BC-2S-WC-PRO Bedienungsanleitung

Echo

Echo SRM-410ES Bedienungsanleitung

PrimAster

PrimAster PMAFS 40 Bedienungsanleitung