Hitachi CP-X10000 Series Bedienungsanleitung

Projector

CP-X10000/CP-WX11000/CP-SX12000

User's Manual (detailed) – Operating Guide

Thank you for purchasing this projector.

►Before using this product, please read the "User's Manual -

Safety Guide" and related manuals to ensure the proper use of this product.

After reading them, store them in a safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

WARNING

CAUTION

This entry warns of a risk of serious personal injury or even

death.

This entry warns of a risk of personal injury or physical damage.

Please refer to the pages written following this symbol.



• Windows®is a registered trademark of Microsoft Corporation in the U.S. and/or

other countries.

• VESA and DDC are trademarks of the Video Electronics StandardAssociation.

• Mac®is a registered trademark of Apple Inc.

• DVI is a trademark of Digital Display Working Group.

• HDMI, the HDMI logo and High-Deﬁnition Multimedia Interface are trademarks

or registered trademarks of HDMI Licensing LLC.

• Trademark PJLink is a trademark applied

for trademark rights in Japan, the United

States of America and other countries and areas.

All other trademarks are the properties of their respective owners.

NOTICE This entry notices of fear of causing trouble.

OPTION menu

Item Description

SERVICE

(continued)

COMMUNICATION

(continued)

DAISY CHAIN: Select this type, if it is required to

connect multiple projectors using a shared RS-232C

communication bus, from the computer. (



Network

Guide - 3.8 Multi-controlling the plural projectors (using

DAISY CHAIN function))

OFF: Select this mode if you want to output no data

from the

CONTROL OUT

CONTROL OUT port.

SERIAL IN SETTING/SERIAL OUT SETTING

In these menus, you can select

the communication condition for

each of the

CONTROL IN

CONTROL IN and

CONTROL OUT

CONTROL OUT ports.

BAUD RATE

4800 bps



9600 bps



38400 bps



19200 bps

PARITY

NONE



ODD



EVEN

TRANSMISSION METHOD

This menu is available only when the NETWORK

BRIDGE is selected for the COMMUNICATION TYPE.

Select the transmission method for communication by

the NETWORK BRIDGE from the

CONTROL OUT

port.

HALF-DUPLEX



FULL-DUPLEX

HALF-DUPLEX: This method lets the projector make

two way communication, but only one direction, either

transmitting or receiving data, is allowed at a time.

FULL-DUPLEX: This method lets the projector make

two way communication, transmitting and receiving

data at the same time.

•

OFF is selected as the default setting.

• When you select the NETWORK BRIDGE, check

the item, TRANSMISSTION METHOD.

NOTE

• HALF-DUPLEX is selected as the default

setting.

•

When you select HALF-DUPLEX, check the items,

RESPONSE LIMIT TIME and BYTES INTERVAL TIMEOUT.

NOTE

OPTION menu

Item Description

SERVICE

(continued)

COMMUNICATION

(continued)

RESPONSE LIMIT TIME

This menu is available only when the NETWORK

BRIDGE is selected for the COMMUNICATION

TYPE and the HALF-DUPLEX is selected for the

TRANSMISSION METHOD.

Select the time period to wait for receiving response

data from other devise communicating by the

NETWORK BRIDGE and the HALF-DUPLEX through

the

CONTROL OUT

CONTROL OUT port.

OFF



OFF: Select this mode if it is not required to check the

responses from the devise that the projector sends data

to. In this mode, the projector can send out data from

the computer continuously.

1s/2s/3s: Select the time period to keep the projector

waiting for response from the device that the projector

sends data to. While waiting the response, the projector

does not send out any data from the

CONTROL OUT

port.

BYTES INTERVAL TIMEOUT

This menu is available only when NETWORK BRIDGE

is selected for the COMMUNICATION TYPE and HALF-

DUPLEX is selected for the TRANSMISSION METHOD.

Select the blank time length to judge that the response

data has ﬁnished in the communicating in the condition

of the NETWORK BRIDGE and the HALF-DUPLEX

through the

CONTROL OUT

CONTROL OUT port.

50ms



100ms



150ms



200ms

•

50ms is selected as the default setting.

NOTE

• OFF is selected as the default setting.

NOTE

OPTION menu

Item Description

SERVICE

(continued)

COMMUNICATION

(continued)

COMMUNICATION GROUP / COMMUNICATION ID

This menu is available only when DAISY CHAIN is

selected for the COMMUNICATION TYPE.

In simultaneous control of multiple projectors by

a daisy chain, you can give the projectors the

communication group identiﬁcation and the ID number

to identify projectors connected in the same bus.

COMMUNICATION GROUP:



C … O



COMMUNICATION ID:



3 … 63



INFORMATION

Selecting this item displays a dialog titled “INPUT-INFORMATION-”.

It shows the information about the current input.

• The “FRAME LOCK” message on the dialog means the frame lock

function is working.

• The “SCART RGB” message means the Component port

is working as a SCART RGB input port. Please refer to the

COMPONENT item in INPUT menu (



37).

• This item can't be selected for no signal and sync out.

• When the MY TEXT DISPLAY is set to ON, the MY TEXT

is displayed together with the input information in the INPUT-

INFORMATION- box (



66).

FACTORY RESET

Selecting OK using ►the button performs this function. By this

function, all the items in all of menus will collectively return to the

initial setting. Note that the items LAMP TIME, FILTER TIME,

LANGUAGE, SECURITY and NETWORK settings are not reset.

CANCEL



• TheA is selected for the

COMMUNICATION GROUP, and 1 is selected for

the COMMUNICATION ID as the default settings.

NOTE

NETWORK menu

Remember that incorrect network settings on this

projector may cause trouble on the network. Be sure

to consult with your network administrator before

connecting to an existing access point on your

network.

Select “NETWORK” from the main menu to access

the following functions.

Select an item using the ▲/▼cursor buttons on the projector or remote control,

and press the ►cursor button on the projector or remote control, or

ENTER

button on the remote control to execute the item. Then perform it according to the

following table.

See the User’s Manual - Network Guide for details of NETWORK operation.

NETWORK menu

• If you are not utilizing SNTP (



Date/Time Settings of the User’s

Manual - Network Guide), then you must set the DATE AND TIME during the

initial installation.

NOTE

Item Description

SETUP

Selecting this item displays the SETUP

Menu for the network.

Use the ▲/▼buttons to select an item,

and the ►or

ENTER

ENTER button on the remote

control to perform the item.

DHCP

(Dynamic

Host

Conﬁguration

Protocol)

Use the ▲/▼buttons to turn DHCP on/off.

ON OFF

Select OFF when the network does

not have DHCP enabled.

• When the “DHCP” setting changes to “ON”, it takes a

little time to obtain IP address from DHCP server.

• Auto IP function will be assigned an IP address if the

projector could not obtain an IP address from server

even if DHCP is “ON”.

(continued on next page)

NETWORK menu

Item Description

SETUP

(continued)

ADDRESS

Use the ▲/▼/◄/►

buttons to enter the IP

ADDRESS.

This function can only be used when DHCP is set to

OFF.

• The IPADDRESS is the number that identiﬁes this

projector on the network. You cannot have two devices

with the same IPADDRESS on the same network.

• The IPADDRESS “0.0.0.0” is prohibited.

SUBNET

MASK

Use the ▲/▼/◄/►

buttons to enter the same

SUBNET MASK used by

your PC.

This function can only be used when DHCP is set to

OFF.

• The SUBNET MASK ”0.0.0.0” is prohibited.

DEFAULT

GATEWAY

Use the ▲/▼/◄/►

buttons to enter the

DEFAULT GATEWAY

(a node on a computer network that serves as an

access point to another network) address.

This function can only be used when DHCP is set to

OFF.

DNS

SERVER

Use the ▲/▼/◄/►

buttons to input the DNS

server address.

The DNS server is a system to control domain names

and IP addresses on the Network.

TIME

DIFFERENCE

Use the ▲/▼buttons to enter

the TIME DIFFERENCE.

Set the same TIME

DIFFERENCE as the one

set on your PC. If unsure,

consult your IT manager.

Use the ►button to return

to the menu after setting the

TIME DIFFERENCE.

DATE

AND

TIME

Use the ▲/▼/◄/►

buttons to enter the

Year (last two digits),

Month, Date, Hour and Minute.

• The projector will override this setting and retrieve

DATE AND TIME information from the Time server

when SNTP is enabled. (



Date/Time Settings of the

User’s Manual - Network Guide)

(continued on next page)

NETWORK menu

Item Description

PROJECTOR

NAME

(1) Use the▲/▼buttons on the

NETWORK menu to select the

PROJECTOR NAME menu

and press the ►button. The

PROJECTOR NAME dialog will

be displayed.

(2) The current PROJECTOR NAME will be displayed on the ﬁrst 3

lines. If not yet written, the lines will be blank.

Use the ▲/▼/◄/►buttons and the

ENTER

ENTER or

VIDEO

VIDEO button to

select and enter characters.

The

RESET

RESET or

COMPUTER

COMPUTER button can be used to erase 1

character at a time. Also if you move the cursor to DELETE or

ALL CLEAR on screen and push the

ENTER

ENTER or

VIDEO

VIDEO button,

1 character or all characters will be erased.The PROJECTOR

NAME can be input up to 64 characters.

(3) To change an already inserted

character, press the ▲/▼button

to move the cursor to one of the

ﬁrst 3 lines, and use the ◄/►

buttons to move the cursor on the

character to be changed. After

pressing the

ENTER

ENTER or

VIDEO

button, the character is selected.

Then, follow the same procedure

as described at the item (2) above.

(4) To ﬁnish entering text, move the cursor to the OK on screen and

press the ►,

ENTER

ENTER or

VIDEO

VIDEO button. To revert to the previous

PROJECTOR NAME without saving changes, move the cursor

to the CANCEL on screen and press the ◄,

ENTER

ENTER or

VIDEO

button.

(continued on next page)

NETWORK menu

Item Description

MY IMAGE

Selecting this item displays the MY

IMAGE menu.

The application software “PJImage”

is required to store image(s) into the

projector.

Use the ▲/▼buttons to select an item which is a still image by the

MY IMAGE (



MY IMAGE (Still Image Transfer) Display of the

User’s Manual - Network Guide) and the ►or

ENTER

ENTER button to

display the image.

• The item without image stored cannot be selected.

• The image names are each displayed in 16 characters or less.

To switch the image displayed

Use the ▲/▼buttons.

To return to the menu

Press the ◄button on the remote control.

To erase the image displayed and its source ﬁle in the projector.

(1) Press the

RESET

RESET button on the

remote control while displaying an

image to display the MY IMAGE

DELETE menu.

(2) Press the ►button to perform to erase.

To stop erasing, press the ◄button.

(continued on next page)

NETWORK menu

Item Description

INFORMATION

Selecting this item displays the NETWORK -INFORMATION- dialog

for conﬁrming the network settings.

• Only the first 16 characters of the projector neme are displayed.

• Nothing (blank) is shown in the “PROJECTOR NAME” field until

you setup the item (



58).

•

When the voltage level of the battery for the built in clock

decreases, the set time may become incorrect even though accurate

date and time are input. Replace the battery suitably

(



70).

• IPADDRESS, SUBNET MASK and DEFAULT GATEWAY indicate

“0.0.0.0” when DHCP is ON and the projector has not gotten

address from DHCP server.

SERVICE

Executing this item restarts and initializes the network functions.

Choose the RESTART EXECUTE using the button ►.

Then use the button ►to execute.

Network will be once cut off when choose restart.

If DHCP is selected on, IP address may be changed.

After selecting RESTART EXECUTE, NETWORK menu may not be

controlled approx. 30 seconds.

SECURITY menu

This projector is equipped with security functions.

From the SECURITY menu, items shown in the table below can

be performed.

To use SECURITY menu: User registration is required before

using the security functions.

Enter the SECURITY menu

1. Use the ▲/▼buttons on the SECURITY menu to select ENTER PASSWORD and press the ►

button. The ENTER PASSWORD box will be displayed.

If you have forgotten your password

1. While the ENTER PASSWORD box is displayed, press and hold the

RESET

RESET button on the remote

control for about 3 seconds or press and hold the

COMPUTER

COMPUTER button for 3 seconds while pressing

the ►button on the projector.

2. The 10 digit Inquiring Code will be displayed. Contact your dealer with the 10 digit Inquiring Code.

Your password will be sent after your user registration information is conﬁrmed.

• If there is no key input for about 55 seconds while the Inquiring Code is displayed, the menu will

close. If necessary, repeat the process from 1.

2. Use the ▲/▼/◄/►buttons to enter the registered password.

The factory default password is 9630. This password can be

changed (



SECURITY PASSWORD CHANGE). Move the

cursor to the right side of the ENTER PASSWORD box and

press the ►button to display the SECURITY menu.

• It is strongly recommended the factory default password to be changed

as soon as possible.

• If an incorrect password is input, the ENTER PASSWORD box will

be displayed again. If incorrect password is input 3 times, the projector

will turn off.Afterwards the projector will turn off every time an incorrect

password is input.

3. Items shown in the table below can be performed.

Item Description

SECURITY

PASSWORD

CHANGE

1 Use the ▲/▼buttons on the SECURITY menu

to select SECURITY PASSWORD CHANGE

and press the ►button to display the ENTER

NEW PASSWORD box.

2 Use the ▲/▼/◄/►buttons to enter the new

password.

3 Move the cursor to the right side of the ENTER

NEW PASSWORD box and press the ►button

to display the NEW PASSWORD AGAIN box,

enter the same password again.

Move the cursor to the right side of the NEW

PASSWORD AGAIN box and press the ►

button and the NOTE NEW PASSWORD box

will be displayed for about 20 seconds, please

make note of the password during this time.

Pressing the

ENTER

ENTER button on the remote control or

VIDEO

VIDEO button on

the projector will close the NOTE NEW PASSWORD box.

• Please do not forget your password.

SECURITY menu

(continued on next page)

Andere Handbücher für CP-X10000 Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hitachi Projektor Handbücher

Hitachi

Hitachi Innovate CP-WX8240 Bedienungsanleitung

Hitachi

Hitachi X253 - CP XGA LCD Projector Bedienungsanleitung

Hitachi

Hitachi ED-X8250 series Bedienungsanleitung

Hitachi

Hitachi LP-WU9750B Bedienungsanleitung

Hitachi

Hitachi X1250 - XGA LCD Projector Administratorhandbuch

Hitachi

Hitachi CP-AX2503 Bedienungsanleitung

Hitachi

Hitachi CP-X1250J Bedienungsanleitung

Hitachi

Hitachi CP-X4022WN Bedienungsanleitung

Hitachi

Hitachi CP-EW300 Bedienungsanleitung

Hitachi

Hitachi CP-SX635 - SXGA+ LCD Projector Leitfaden

Hitachi

Hitachi CP-L540E Bedienungsanleitung

Hitachi

Hitachi LP-WU6600 Bedienungsanleitung

Hitachi

Hitachi ED-A220N Bedienungsanleitung

Hitachi

Hitachi CPX305 - XGA LCD Projector Montage- und Wartungsanleitung

Hitachi

Hitachi PJ-TX200W Bedienungsanleitung

Hitachi

Hitachi CP-WX9210 Bedienungsanleitung

Hitachi

Hitachi CP-WX625 Technisches Dokument

Hitachi

Hitachi CPX5 Technisches Dokument

Hitachi

Hitachi CP-X1230 Technisches Dokument

Hitachi

Hitachi CP-X8150 Bedienungsanleitung

Hitachi

Hitachi CP-DX250 guide Bedienungsanleitung

Hitachi

Hitachi CPX960WA Bedienungsanleitung

Hitachi

Hitachi CP-X8170 Bedienungsanleitung

Hitachi

Hitachi CP-X605 Series Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung