Hitachi CP-X809W Bedienungsanleitung

Projector

CP-X809W

ENGLISH

FRANÇAIS

DEUTSCH

ESPAÑOL

ITALIANO

NORSK

NEDERLANDS

PORTUGUÊS

Ё᭛

뼑霢꽩

SVENSKA

ɊɍɋɋɄɂɃ

SUOMI

POLSKI

User’s Manual (concise)

Please read this user’s manual thoroughly to ensure the proper use of this product.

Manuel d'utilisation (résumé)

Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le

fonctionnement de l'appareil.

Bedienungsanleitung (Kurzform)

Um zu gewährleisten, dass Sie die Bedienung des Geräts verstanden haben, lesen Sie

dieses Handbuch bitte sorgfältig.

Manual de usuario (resumido)

Lea atentamente el manual de usuario del proyector para garantizar un uso adecuado del

mismo.

Manuale d'istruzioni (condensato)

Vi preghiamo di leggere attentamente il manuale d'istruzioni per garantire una corretta

comprensione delle istruzioni.

Brukerhåndbok (konsis)

Vennligst les denne brukerhåndbok grundig for å være garantert driftssikker bruk.

Gebruiksaanwijzing (beknopt)

Lees deze gebruikershandleiding grondig door, zodat u de werking ervan begrijpt en correct

gebruik verzekerd is.

Manual do Usuário (resumido)

Leia atentamente o presente manual do utilizador para garantir a utilização correcta por via

da sua compreensão.

๑ᆩຫ௽ກ ) ᅟӲ *

൩ጮဦለ܁ԨĖ๑ᆩຫ௽ກėǈሞ૙঴ڦإฉኟඓ๑ᆩă

ꩡ끞꫙ꐺ꫑ 샩鲵끞 

ꚭꩡ끞녅꫙ꐺ꫑ꌱ녍넲냱겑隕넩뼩뼍겕쁹 꿡ꗉꌩ陁ꩡ끞뼩늱겢겑꿙 

Bruksanvisning (koncis)

Läs denna bruksanvisning noga för att förstå alla instruktionerna för ett korrekt bruk.

Ɋɭɤɨɜɨɞɫɬɜɨɩɨɥɶɡɨɜɚɬɟɥɹɤɪɚɬɤɢɣ

ɉɨɠɚɥɭɣɫɬɚɜɧɢɦɚɬɟɥɴɧɨɩɪɨɱɬɢɬɟɞɚɧɧɨɟɪɭɤɨɜɨɞɫɬɜɨɩɨɥɴɡɨɜɚɬɟɥɹɞɥɹ

ɨɡɧɚɤɨɦɥɟɧɢɹɢɧɪɚɜɢɥɶɧɨɢɫɩɨɥɶɡɨɜɚɧɢɹ

Käyttäjän ohjekirja (suppea)

Lue käyttäjän ohjekirja huolellisesti varmistaaksesi, että ymmärrät

miten laitetta käytetään oikein.

3RGUĊF]QLNXĪ\WNRZQLND]ZLĊ]á\

3U]HF]\WDMGRNáDGQLHL]H]UR]XPLHQLHPQLQLHMV]\SRGUĊF]QLN

XĪ\WNRZQLNDDE\]DSHZQLüSUDZLGáRZHXĪ\WNRZDQLHXU]ąG]HQLD

AE 68

NOTE7KHLQIRUPDWLRQLQWKLVPDQXDOLVVXEMHFWWRFKDQJHZLWKRXWQRWLFH7KHPDQXIDFWXUHU

DVVXPHVQRUHVSRQVLELOLW\IRUDQ\HUURUVWKDWPD\DSSHDULQWKLVPDQXDO7KHUHSURGXFWLRQWUDQVIHU

or copy of all or any part of this document is not permitted without express written consent.

REMARQUE/HVLQIRUPDWLRQVFRQWHQXHVGDQVFHPDQXHOSHXYHQWIDLUHOREMHWGHFKDQJHPHQWVVDQV

DYHUWLVVHPHQWSUpDODEOH/HIDEULFDQWQHSUHQGDXFXQHUHVSRQVDELOLWpSRXUOHVHUUHXUVTXLSRXUUDLHQW

VHWURXYHUGDQVFHPDQXHO/DUHSURGXFWLRQODWUDQVPLVVLRQRXOXWLOLVDWLRQGHFHGRFXPHQWRXGH

son contenu est interdite sauf autorisation spéciale écrite.

HINWEIS'LH,QIRUPDWLRQHQLQGLHVHP+DQGEXFKN|QQHQRKQHYRUKHULJH$QNQGLJXQJJHlQGHUW

ZHUGHQ'HU+HUVWHOOHUEHUQLPPWNHLQH9HUDQWZRUWXQJIUHWZDLJHLQGLHVHP+DQGEXFKHQWKDOWHQH

)HKOHU'LH9HUYLHOIlOWLJXQJhEHUWUDJXQJRGHU9HUZHQGXQJGLHVHV'RNXPHQWVRGHUGHVVHQ,QKDOWV

LVWRKQHDXVGUFNOLFKHVFKULIWOLFKH*HQHKPLJXQJQLFKWJHVWDWWHW

NOTA/DLQIRUPDFLyQGHHVWHPDQXDOSXHGHVXIULUPRGL¿FDFLRQHVVLQSUHYLRDYLVR(OIDEULFDQWH

QRDVXPHQLQJXQDUHVSRQVDELOLGDGSRUORVHUURUHVTXHSXHGDQDSDUHFHUHQHVWHPDQXDO1R

HVWiSHUPLWLGDODUHSURGXFFLyQWUDQVPLVLyQRXWLOL]DFLyQGHHVWHGRFXPHQWRQLGHVXFRQWHQLGRVLQ

DXWRUL]DFLyQH[SUHVDSRUHVFULWR

NOTA/HLQIRUPD]LRQLULSRUWDWHLQTXHVWRPDQXDOHVRQRVRJJHWWHDPRGL¿FDVHQ]DSUHDYYLVR,O

SURGXWWRUHGHFOLQDTXDOVLDVLUHVSRQVDELOLWjSHUHYHQWXDOLHUURULFKHSRWUHEEHURFRPSDULUHQHOSUHVHQWH

PDQXDOH(¶YLHWDWDODULSURGX]LRQHODWUDVPLVVLRQHRO¶XWLOL]]RGHOSUHVHQWHGRFXPHQWRRGHOVXR

contenuto senza espressa autorizzazione scritta.

MERK,QIRUPDVMRQHQLGHQQHKnQGERNHQNDQHQGUHVXWHQYDUVHO3URGXVHQWHQSnWDUVHJLQWHW

DQVYDUIRUHYHQWXHOOHIHLOVRPIUHPNRPPHULGHQQHKnQGERNHQ5HSURGXNVMRQRYHUI¡ULQJHOOHUEUXN

av dette dokumentet eller deler av det, er ikke tillatt uten uttrykt skriftlig tillatelse.

OPMERKING'HLQIRUPDWLHLQGH]HKDQGOHLGLQJNDQ]RQGHUYRRUDIJDDQGHNHQQLVJHYLQJYHUDQGHUG

ZRUGHQ'HIDEULNDQWQHHPWJHHQHQNHOHYHUDQWZRRUGHOLMNKHLGYRRUGHHYHQWXHOHIRXWHQLQGH]H

KDQGOHLGLQJ5HSURGXFWLHRYHUGUDFKWRIKHWJHEUXLNYDQGLWGRFXPHQWLVQLHWWRHJHVWDDQ]RQGHU

uitdrukkelijke toestemming van de betreffende partij.

NOTA$VLQIRUPDo}HVFRQWLGDVQHVWHPDQXDOHVWmRVXMHLWDVDDOWHUDo}HVVHPDYLVRSUpYLR

2IDEULFDQWHQmRVHUHVSRQVDELOL]DSRUTXDLVTXHUHUURVTXHSRVVDPVXUJLUQHVWHPDQXDO

$UHSURGXomRWUDQVPLVVmRRXXWLOL]DomRGHVWHGRFXPHQWRRXGRVHXFRQWH~GRQmRpSHUPLWLGDVHP

autorização expressa por escrito.

ཚኪ๚ၜ!Ԩກዐሜڦాඹᆶీփঢ়ᇨߢܸ݀ิՎ߸ăԨׂ೗ڦ዆ሰኁܔԨກዐڦሜٱဃփ޶

ඪࢆሴඪă࿄ঢ়ሎႹ൩ကް዆Ăገሜࢅ๑ᆩԨກڦևݴඇևాඹă

꼁ꍱ• 본서에 기재되어 있는 내용은 예고 없이 변경하는 일이 있습니다 .• 본제품의 제조자는 , 본서

에 있어서의 기재 오류에 대해서 일절의 책임도 지지 않습니다 .• 본서 내용의 일부 혹은 전부를 무단

으로 복사하거나 전재하여 사용하는 것을 절대 금합니다 .

NOTERA,QIRUPDWLRQHQLGHQQDEUXNVDQYLVQLQJNDQNRPPDDWWlQGUDVXWDQI|UYDUQLQJ7LOOYHUNDUHQ

SnWDUVLJLQJHWDQVYDUI|UHYHQWXHOODIHOLGHQQDEUXNVDQYLVQLQJcWHUJLYQLQJ|YHUVlQGDQGHHOOHU

användning av detta dokument eller dess innehåll är inte tillåten utan uttrycklig skriftligt medgivande.

ɉɊɂɆȿɑȺɇɂȿɋɨɞɟɪɠɚɧɢɟɞɚɧɧɨɝɨɪɭɤɨɜɨɞɫɬɜɚɦɨɠɟɬɢɡɦɟɧɹɬɶɫɹɛɟɡɩɪɟɞɜɚɪɢɬɟɥɶɧɨɝɨ

ɭɜɟɞɨɦɥɟɧɢɹɉɪɨɢɡɜɨɞɢɬɟɥɶɧɟɧɟɫɟɬɨɬɜɟɬɫɬɜɟɧɧɨɫɬɢɡɚɨɲɢɛɤɢɜɞɚɧɧɨɦɪɭɤɨɜɨɞɫɬɜɟ

ȼɨɫɩɪɨɢɡɜɟɞɟɧɢɟɩɟɪɟɞɚɱɚɢɢɫɩɨɥɶɡɨɜɚɧɢɟɞɚɧɧɨɝɨɞɨɤɭɦɟɧɬɚɢɥɢɟɝɨɫɨɞɟɪɠɚɧɢɹ

ɡɚɩɪɟɳɟɧɨɛɟɡɩɢɫɶɦɟɧɧɨɝɨɪɚɡɪɟɲɟɧɢɹ

HUOM!7lPlQRKMHNLUMDQWLHGRWYRLYDWPXXWWXDLOPDQHULLOPRLWXVWD9DOPLVWDMDHLRWDPLWllQ

YDVWXXWDRKMHNLUMDVVDPDKGROOLVHVWLROHYLVWDYLUKHLVWl'RNXPHQWLQWDLVHQVLVlOO|QMlOMHQWlPLQHQ

siirto tai käyttö ei ole sallittua ilmannimenomaista kirjallista valtuutusta.

UWAGA,QIRUPDFMHSRGDQHZW\PSRGUĊF]QLNXPRJąXOHF]PLDQLHEH]XSU]HG]HQLD3URGXFHQW

QLHSRQRVLRGSRZLHG]LDOQRĞFL]DHZHQWXDOQHEáĊG\ZSRGUĊF]QLNX3RZLHODQLHSU]HV\áDQLHOXELQQH

Z\NRU]\VWDQLHWHJRGRNXPHQWXOXEMHJRWUHĞFLQLHMHVWGR]ZRORQHEH]Z\UDĨQHMSLVHPQHM]JRG\

About The Symbols

Various symbols are used in this manual, the user’s manual and on the product

itself to ensure correct usage, to prevent danger to the user and others, and to

prevent property damage. The meanings of these symbols are described below.

It is important that you read these descriptions thoroughly and fully understand

the contents.

Projector

User's Manual - Safety Guide

Typical Symbols

This symbol indicates an additional warning (including cautions). An

illustration is provided to clarify the contents.

This symbol indicates a prohibited action. The contents will be clearly

indicated in an illustration or nearby (the symbol to the left indicates that

disassembly is prohibited).

This symbol indicates a compulsory action. The contents will be clearly

indicated in an illustration or nearby (the symbol to the left indicates that

the power plug should be disconnected from the power outlet).

Thank you for purchasing this projector.

NOTE • The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transmission or use of this document or contents is not

permitted without express written authority.

WARNING •

Before using, read these user's manuals of this projector to ensure

correct usage through understanding. After reading, store them in a safe place for

future reference. Incorrect handling of this product could possibly result in personal injury

or physical damage. The manufacturer assumes no responsibility for any damage caused

by mishandling that is beyond normal usage defined in these manuals of this projector.

WARNING This symbol indicates information that, if ignored, could

possibly result in personal injury or even death due to

incorrect handling.

CAUTION This symbol indicates information that, if ignored, could

result possibly in personal injury or physical damage

due to incorrect handling.

Read this Safety Guide first.

Safety Precautions

WARNING

Never use the projector if a problem should occur.

Abnormal operations such as smoke, strange odor, no image, no sound,

excessive sound, damaged casing or elements or cables, penetration of

liquids or foreign matter, etc. can cause a fire or electrical shock.

In such case, immediately turn off the power switch and then disconnect the

power plug from the power outlet. After making sure that the smoke or odor

has stopped, contact your dealer. Never attempt to make repairs yourself

because this could be dangerous.

• The power outlet should be close to the projector and easily accessible.

Use special caution for children and pets.

Incorrect handling could result in fire, electrical shock, injury, burn or vision

problem.

Use special caution in households where children and pets are present.

Do not insert liquids or foreign object.

Penetration of liquids or foreign objects could result in fire or electrical shock.

Use special caution in households where children are present.

If liquids or foreign object should enter the projector, immediately turn off the

power switch, disconnect the power plug from the power outlet and contact

your dealer.

• Do not place the projector near water (ex. a bathroom, a beach, etc.).

• Do not expose the projector to rain or moisture. Do not place the projector

outdoors.

• Do not place flower vases, pots, cups, cosmetics, liquids such as water, etc

on or around the projector.

• Do not place metals, combustibles, etc on or around the projector.

•To avoid penetration of foreign objects, do not put the projector into a case

or bag together with any thing except the accessories of the projector,

signal cables and connectors.

Never disassemble and modify.

The projector contains high voltage components. Modification and/or disassembly of

the projector or accessories could result in fire or electrical shock.

• Never open the cabinet.

• Ask your dealer to repair and clean insider.

Do not give the projector any shock or impact.

If the projector should be shocked and/or broken, it could result in an injury,

and continued use could result in fire or electrical shock.

If the projector is shocked, immediately turn off the power switch, disconnect

the power plug from the power outlet and contact your dealer.

Do not place the projector on an unstable surface.

If the projector should be dropped and/or broken, it could result in an injury,

and continued use could result in fire or electrical shock.

• Do not place the projector on an unstable, slant or vibrant surface such as

a wobbly or inclined stand.

• Use the caster brakes placing the projector on a stand with casters.

• Do not place the projector in the side up position, the lens up position or

the lens down position.

• In the case of a ceiling installation or the like, contact your dealer before

installation.

Disconnect the

plug from the

power outlet.

Do not

disassemble.

WARNING

Be cautious of High temperatures of the projector.

High temperatures are generated when the lamp is lit. It could result in fire or

burn. Use special caution in households where children are present.

Do not touch about the lens, air fans and ventilation openings during use or

immediately after use, to prevent a burn. Take care of ventilation.

• Keep a space of 30 cm or more between the sides and other objects such

as walls.

• Do not place the projector on a metallic table or anything weak in heat.

• Do not place anything about the lens, air fans and ventilation openings of

the projector.

• Never block the air fan and ventilation openings.

• Do not cover the projector with a tablecloth, etc.

• Do not place the projector on a carpet or bedding.

Never look through the lens or openings when the lamp is on.

The powerful light could adversely affect vision.

Use special caution in households where children are present.

Use only the correct power cord and the correct power outlet.

Incorrect power supply could result in fire or electrical shock.

• Use only the correct power outlet depending on the indication on the

projector and the safety standard.

• The enclosed power cord must be used depending on the power outlet to

be used.

Be cautious of the power cord connection.

Incorrect connection of the power cord could result in fire or electrical shock.

• Do not touch the power cord with a wet hand.

• Check that the connecting portion of the power cord is clean (with no dust),

before using. Use a soft and dry cloth to clean the power plug.

• Insert the power plug into a power outlet firmly. Avoid using a loose,

unsound outlet or contact failure.

Be sure to connect with ground wire.

Connect the ground terminal of AC inlet of this unit with the ground terminal

provided at the building using the correct power cord; otherwise, fire or

electric shock can result.

• Don’t take the core of power cord away.

Safety Precautions (continued)

Surely connect

the ground wire.

WARNING

Be careful in handling the light source lamp.

The projector uses a high-pressure mercury glass lamp made of glass.

The lamp can break with a loud bang, or burn out. When the bulb bursts,

it is possible for shards of glass to fly into the lamp housing, and for gas

containing mercury to escape from the projector’s vent holes.

Please carefully read the section “Lamp”.

Be careful in handling the power cord and external connection

cables.

If you keep using a damaged the power cord or cables, it can cause a fire

or electrical shock. Do not apply too much heat, pressure or tension to the

power cord and cables.

If the power cord or cables is damaged (exposed or broken core wires, etc.),

contact your dealer.

• Do not place the projector or heavy objects on the power cord and cables.

Also, do not place a spread, cover, etc, over them because this could result

in the inadvertent placing of heavy objects on the concealed power cord or

cables.

• Do not pull the power cord and cables. When connecting and

disconnecting the power cord or cables, do it with your hand holding the plug

or connector.

• Do not place the cord near the heater.

• Avoid bending the power cord sharply.

• Do not attempt to work on the power cord.

Be careful in handling the battery of the remote control.

Incorrect handling of the battery could result in fire or personal injury. The

battery may explode if not handled properly.

• Keep the battery away from children and pets. If swallowed consult a

physician immediately for emergency treatment.

• Do not allow the battery in a fire or water.

• Avoid fire or high-temperature environment.

• Do not hold the battery with the metallic tweezers.

• Keep the battery in a dark, cool and dry play.

• Do not short circuit the battery.

• Do not recharge, disassemble or solder the battery.

• Do not give the battery a physical impact.

• Use only the battery specified in the other manual of this projector.

• Make sure the plus and minus terminals are correctly aligned when loading

the battery.

• If you observe a leakage of the battery, wipe out the flower and then

replace the battery. If the flower adheres your body or clothes, rinse well with

water.

• Obey the local laws on disposing the battery.

Safety Precautions (continued)

CAUTION

Be careful in moving the projector.

Neglect could result in an injury or damage.

• Do not move the projector during use. Before moving, disconnect the

power cord and all external connections, and close the slide lens door or

attach the lens cap.

• Avoid any impact or shock to the projector.

• Do not drag the projector.

•For moving the projector, use the enclosed case or bag if provided.

Do not put anything on top of the projector.

Placing anything on the projector could result in loss of balance or falling,

and cause an injury or damage. Use special caution in households where

children are present.

Do not attach anything other than specified things to the projector.

Neglect could result in an injury or damage.

• Some projector has a screw thread in a lens part. Do not attach anything

other than specified options (such as conversion lens) to the screw thread.

Avoid a smoky, humid or dusty place.

Placing the projector in a smoke, a highly humid, dusty place, oily soot or

corrosive gas could result in fire or electrical shock.

• Do not place the projector near a smoky, humid or dusty place (ex.

a smoking space, a kitchen, a beach, etc.). Do not place the projector

outdoors.

• Do not use a humidifier near the projector.

Take care of the air filter to normal ventilate.

The air filter should be cleaned periodically. If the air filter becomes clogged

by dust or the like, internal temperature rises and could cause malfunction.

The projector may display the message such as “CHECK THE AIR FLOW”

or turn off the projector, to prevent the internal heat level rising.

• When the indicators or a message prompts you to clean the air filter, clean

the air filter as soon as possible.

• If the soiling will not come off the air filter, or it becomes damaged, replace

the air filter.

• Use the air filter of the specified type only. Please order the air filter

specified in the other manual of this projector to your dealer.

• When you replace the lamp, replace also the air filter. The air filter may be

attached when you buy a replacement lamp for this projector.

• Do not turn on the projector without air filter.

Avoid a high temperature environment.

The heat could have adverse influence on the cabinet of the projector and

other parts. Do not place the projector, the remote control and other parts in

direct sunlight or near a hot object such as heater, etc.

Avoid Magnetism.

Manufacture strongly recommends to avoid any magnetic contact that is not

shielded or protected on or near the projector itself. (ie.,. Magnetic Security

Devices, or other projector accessory that contains magnetic material that has not

been provided by the manufacture etc.) Magnetic objects may cause interruption

of the projector's internal mechanical performance which may interfere with cooling

fans speed or stopping, and may cause the projector to completely shut down

Safety Precautions (continued)

NOTE

Do not give the remote control any physical impact.

A physical impact could cause damage or malfunction of the remote control.

• Take care not to drop the remote control.

• Do not place the projector or heavy objects on the remote control.

Take care of the lens.

• Close the slide lens door or attach the lens cap to prevent the lens surface being

scratched when the projector is not used.

• Do not touch the lens to prevent fog or dirt of the lens that cause deterioration of display

quality.

• Use commercially available lens tissue to clean the lens (used to clean cameras,

eyeglasses, etc.). Be careful not to scratch the lens with hard objects.

Take care of the cabinet and the remote control.

Incorrect care could have adverse influence such as discoloration, peeling paint, etc.

• Use a soft cloth to clean the cabinet and control panel of the projector and the remote

control. When excessively soiled dilute a neutral detergent in water, wet and wring out the

soft cloth and afterward wipe with a dry soft cloth. Do not use undiluted detergent directly.

•Do not use an aerosol sprays, solvents, volatile substances or abrasive cleaner.

• Before using chemical wipes, be sure to read and observe the instructions.

• Do not allow long-term close contact with rubber or vinyl.

About bright spots or dark spots.

Although bright spots or dark spots may appear on the screen, this is a unique characteristic of

liquid crystal displays, and such do not constitute or imply a machine defect.

Be careful of printing of the LCD panel.

If the projector continues projecting a still image, inactive images or 16:9 aspect images in

case of 4:3 panel, etc., for long time, the LCD panel might possibly be printed.

CAUTION

Remove the power cord for complete separation.

• For safety purposes, disconnect the power cord if the projector is not to be

used for prolonged periods of time.

• Before cleaning, turn off and unplug the projector. Neglect could result in

fire or electrical shock.

Ask your dealer to cleaning inside of the projector about every

year.

Accumulations of dust inside the projector cause result in fire or malfunction.

Cleaning inside is more effective if performed before every humid periods

such as rainy season.

• Do not clean inside yourself because it is dangerous.

Disconnect the

plug from the

power outlet.

Safety Precautions (continued)

NOTE

About consumables.

Lamp, LCD panels, polarizors and other optical components, and air filter and cooling fans

have a different lifetime in each. These parts may need to be replaced after a long usage

time.

• This product isn’t designed for continuous use of long time. In the case of continuous use

for 6 hours or more, or use for 6 hours or more every day (even if it isn’t continuous), or

repetitious use, the lifetime may be shortened, and these parts may need to be replaced

even if one year has not passed since the beginning of using.

•Any inclining use beyond the adjustment range explained in these user’s manuals may

shorten the lifetimes of the consumables.

Before turning on the power, make the projector cool down adequately.

After turning the projector off, pushing the restart switch or interrupting of the power supply,

make the projector cool down adequately. Operation in a high temperature state of the

projector causes a damage of the electrode and un-lighting of the lamp.

Avoid strong rays.

Any strong ray (such as direct rays of the sun or room lighting) onto the remote control

sensors could invalidate the remote control.

Avoid radio interference.

Any interfering radiation could cause disordered image or noises.

• Avoid radio generator such as a mobile telephone, transceiver, etc. around the projector.

About displaying characteristic.

The display condition of the projector (such as color, contrast, etc.) depends on

characteristic of the screen, because the projector uses a liquid crystal display panel. The

display condition can differ from the display of CRT.

• Do not use a polarized screen. It can cause red image.

Turn the power on/off in right order.

To prevent any trouble, turn on/off the projector in right order mentioned below unless

specifying.

• Power on the projector before the computer or video tape recorder.

• Power off the projector after the computer or video tape recorder.

Take care not to fatigue your eyes.

Rest the eyes periodically.

Set the sound volume at a suitable level to avoid bothering other people.

• It is better to keep the volume level low and close the windows at night to protect the

neighborhood environment.

Connecting with notebook computer

When connecting with notebook computer, set to valid the RGB external image output

(setting CRT display or simultaneous display of LCD and CRT).

Please read instruction manual of the notebook for more information.

• If the lamp should break (it will make a loud bang when it does), unplug

the power cord from the outlet, and make sure to request a replacement

lamp from your local dealer. Note that shards of glass could damage the

projector’s internals, or cause injury during handling, so please do not try to

clean the projector or replace the lamp yourself.

• If the lamp should break (it will make a loud bang when it does), ventilate

the room well, and make sure not to breathe the gas that comes out of the

projector vents, or get it in your eyes or mouth.

• Before replacing the lamp, make sure the power switch is off and the

power cable is not plugged in, then wait at least 45 minutes for the lamp to

cool sufficiently. Handling the lamp while hot can cause burns, as well as

damaging the lamp.

Lamp

The projector uses a high-pressure mercury glass lamp. The lamp can break with a

loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time.

Note that each lamp has a different lifetime, and some may burst or burn out soon after

you start using them. In addition, when the bulb bursts, it is possible for shards of

glass to fly into the lamp housing, and for gas containing mercury to escape from the

projector’s vent holes.

About disposal of a lamp • This product contains a mercury lamp; do not put in trash.

Dispose of in accord with environmental laws.

For lamp recycling, go to www.lamprecycle.org. (in USA)

For product disposal, contact your local government agency or www.eiae.org (in the US)

or www.epsc.ca (in Canada).

For more information, call your dealer.

• Do not open the lamp cover while the projector is suspended from above.

This is dangerous, since if the lamp’s bulb has broken, the shards will

fall out when the cover is opened. In addition, working in high places is

dangerous, so ask your local dealer to have the lamp replaced even if the

bulb is not broken.

• Do not use the projector with the lamp cover removed. At the lamp

replacing, make sure that the screws are screwed in firmly. Loose screws

could result in damage or injury.

•Use the lamp of the specified type only.

• If the lamp breaks soon after the first time it is used, it is possible that

there are electrical problems elsewhere besides the lamp. If this happens,

contact your local dealer or a service representative.

• Handle with care: jolting or scratching could cause the lamp bulb to burst

during use.

• Using the lamp for long periods of time, could cause it dark, not to light up

or to burst. When the pictures appear dark, or when the color tone is poor,

please replace the lamp as soon as possible. Do not use old (used) lamps;

this is a cause of breakage.

WARNING

HIGH VOLTAGE HIGH TEMPERATURE HIGH PRESSURE

Disconnect

the plug from

the power

outlet

Inhaltsverzeichnis

Andere Hitachi Projektor Handbücher

Hitachi

Hitachi CP-EX303 Bedienungsanleitung

Hitachi

Hitachi CPX870D Bedienungsanleitung

Hitachi

Hitachi CPX268 - Portable Lcd Projector Bedienungsanleitung

Hitachi

Hitachi Innovate CP-RX93 Bedienungsanleitung

Hitachi

Hitachi CP-X615W and Bedienungsanleitung

Hitachi

Hitachi HOME-1 Technisches Dokument

Hitachi

Hitachi CP-TW2503 Bedienungsanleitung

Hitachi

Hitachi CP-RX80 - XGA LCD Projector Bedienungsanleitung

Hitachi

Hitachi CP-AW250N Bedienungsanleitung

Hitachi

Hitachi CP-DX301 Bedienungsanleitung

Hitachi

Hitachi CP-WU13K Bedienungsanleitung

Hitachi

Hitachi CP-X2510Z and Bedienungsanleitung

Hitachi

Hitachi CP-A200J Bedienungsanleitung

Hitachi

Hitachi CP-X2514WN Bedienungsanleitung

Hitachi

Hitachi MP-WU8801B Bedienungsanleitung

Hitachi

Hitachi CP-WX3014WN Bedienungsanleitung

Hitachi

Hitachi CP-322i Bedienungsanleitung

Hitachi

Hitachi X253 - CP XGA LCD Projector Bedienungsanleitung

Hitachi

Hitachi ED-X22 Bedienungsanleitung

Hitachi

Hitachi X1250 - XGA LCD Projector Gebrauchs- und Pflegehandbuch

Hitachi

Hitachi CP-WU5506M Bedienungsanleitung

Hitachi

Hitachi HOME-1 Bedienungsanleitung

Hitachi

Hitachi CP-X1200 Series Bedienungsanleitung

Hitachi

Hitachi CP-L540E Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung