Hitachi CPX305 - XGA LCD Projector Montage- und Wartungsanleitung

Projector

CP-X205/CP-X305

User’s Manual (detailed)

Network Guide

This manual is only intended to explain Network Functions.

For safety, operations or any other issues, refer to the Safety Guide or Operating

Guide.

• Before using this product, please read all manuals for this

product. Be sure to read Safety Guide rst. After reading, keep the manuals in a

safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Contents

Network Functions .................................................................. 2

Conguring and Controlling the Projector via a Web Browser

... 4

E-mail Alerts .......................................................................... 23

Projector Management using SNMP...................................... 25

Event Scheduling ................................................................... 26

e-SHOT (Still Image Transfer) Display .................................. 29

Command Control via the Network....................................... 31



Trademark acknowledgement

• Windows is a registered trademark of Microsoft Corporation.

• Netscape is a registered trademark of Netscape Communications Corporation.

• JavaScript is a registered trademark of Sun Microsystems, Inc.

All other trademarks are the properties of their respective owners.

Network Functions

Conguring and Controlling the Projector via a Web Browser

You can change the settings of or control the projector via a network by using a

web browser from a PC that is connected to the same network.

(4)

E-mail Alerts

The projector can automatically send an alert to specied e-mail addresses when

the projector requires maintenance or has encountered an error.

(23)

Projector Management using SNMP

This projector is SNMP (Simple Network Management Protocol) compliant,

allowing you to monitor it from a remote location using SNMP software. In

addition, the projector is able to send failure & warning alerts to a specied PC.

(25)

Event Scheduling

You can schedule the projector to perform various functions according to the date

and time.

(26)

e-SHOT (Still Image Transfer) Display

The projector can display still images that are transferred via the network.

(29)

Command Control via the Network

The projector can be controlled using RS-232C commands over a network.

(31)

This projector is equipped with the following network functions.

Network Functions

Before Using the Network Functions…

To use the network functions of this projector, the projector must be congured to

suit your network. Consult with your network administrator before connecting the

projector to your network. Incorrect network conguration of this projector may

cause problems on your network.

Connect the gateway (The router/PC that forwards trafc to a destination outside

of the subnet of the transmitting device) to the LAN port on the projector using a

CAT-5 cable and congure the following settings.

If using a network with DHCP enabled:

The projector’s network settings can be congured automatically when DHCP on

the NETWORK menu is set to ON. Please refer to DHCP and INFORMATION in

NETWORK menu ("NETWORK menu" section of the User's Manual - Operating Guide).

If a xed / static IP address is required, please congure your projector according

to the steps in the following section.

If using a network without DHCP enabled

or using a xed IP address on a network with DHCP enabled:

Congure the following settings on the NETWORK menu ("NETWORK menu"

section of the User's Manual - Operating Guide).

1. DHCP : Set DHCP to OFF (disabled).

2. IP ADDRESS : Enter an appropriate IP address for the projector to connect to

your network.

3. SUBNET MASK : Enter an appropriate subnet mask for the projector to

connect to your network.

4. DEFAULT GATEWAY : Enter an appropriate gateway address for the

projector to connect to your network.

Conguring and Controlling the Projector via a Web Browser

You can adjust or control the projector via a network from a web browser on a PC

that is connected to the same network.

• Internet Explorer 5.5 or later or Netscape 6.2 or later are required.

• If JavaScript is disabled in your web browser conguration, you must enable

JavaScript in order to use the projector web pages properly. See the Help les

for your web browser for details on how to enable JavaScript.

• If projector is disconnected from network approx. 50 seconds, system will

automatically log off. Please Re-log on to continue operations via a web

browser.

• After you logon, a small, blank window will appear behind the main operation

window. Please do not close this small, blank window. If this window is closed,

the system will automatically log off after approx. 50 seconds even if an

operation is being performed.

The small, blank window will close when the main operation window is closed.

• The small, blank window may be considered a pop-up and be blocked if you

are using Windows XP Service Pack 2, or using other security software.

If Service Pack 2 blocks the window the following message will appear:

"Pop-up blocked. To see this pop-up or additional options click here..."

Please select "Temporarily Allow Pop-ups" or "Always Allow Pop-ups From This

Site..." to allow the window to open.

• You can communicate using SSL (Secure Socket Layer) if you are using

Windows XP Service Pack 2 or earlier versions of Microsoft Windows. Please

specify “https://” when you enter the IP address of the projector on the web

browser. You can't communicate the projector using SSL on Windows Vista.

•

It is recommended to install all web browser updates to communicate using

SSL. It is especially recommended that users using Internet Explorer install

security update Q832894 (MS04-004) or the web browser interface may not be

displayed correctly.

And when using an earlier version of Internet Explorer than version 5.5, during

operations the browser will log out after 50 seconds.

NOTE

Conguring and Controlling the Projector via a Web Browser

Conguring and Controlling the Projector via a Web Browser

When conguring or controlling the projector via a web browser, an ID and

password are required. There are two types of IDs, Administrator and User. The

following chart describes the differences between User and Administrator IDs.

Below are the factory default settings of IDs and passwords for Administrator and

User.

Item Description

Administrator

User

Network Information Displays the projector’s current

network conguration settings. (7)√ √

Network Settings Displays and congures network

settings. (8)√ N/A

Port Settings Displays and congures

communication port settings. (9)√ N/A

Mail Settings Displays and congures e-mail

addressing settings. (10)√ N/A

Alert Settings Displays and congures failure &

warning alerts. (11)√ N/A

Schedule Settings Displays and congures schedule

settings. (13)√ N/A

Date/Time Settings Displays and congures the date and

time settings. (15)√ N/A

Security Settings Displays and congures passwords

and other security settings. (17)√ N/A

Projector Control Controls the projector. (19)√ √

Projector Status Displays and congures the current

projector status. (22)√ √

Network Restart Restarts the projector’s network

connection. (22)√ N/A

Item ID Password

Administrator Administrator <blank>

User User <blank>

Conguring and Controlling the Projector via a Web Browser

Refer to the following for conguring or controlling the projector via a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1) Enter "http://192.168.1.10/" into the

address bar of the web browser and

press "Enter" key or click "Go" button.

The screen in Fig. 1 will be displayed.

2) Enter your ID and password and click

[Logon].

If the logon is successful, either the Fig.2 or Fig.3 screen will be displayed.

3) Click the desired operation or conguration item on the main menu located on

the left side of the screen.

Fig. 2 (Logon with Administrator ID) Fig. 3 (Logon with User ID)

Fig. 1

main menu main menu

Conguring and Controlling the Projector via a Web Browser

Network Information

All screen images displayed in this manual are

screens of a logon using an Administrator ID.

Any Administrator only functions will not be

displayed when using a User ID. Refer to the

descriptions in each table.

Displays the projector’s current network conguration settings.

Item Description

DHCP Displays the DHCP conguration settings.

IP Address Displays the current IP address.

Subnet Mask Displays the subnet mask.

Default Gateway Displays the default gateway.

MAC Address Displays the MAC address.

Firmware Date Displays the network rmware time stamp. This information is only

displayed when logged on using an Administrator ID.

Firmware Version Displays the network rmware version number. This information is

only displayed when logged on using an Administrator ID.

Conguring and Controlling the Projector via a Web Browser

Network Settings

Displays and congures network settings.

Click the [Apply] button to save the settings.

• The new conguration settings are activated after restarting the

network connection. When the conguration settings are changed, you must

restart the network connection. You can restart the network connection by

clicking [Network Restart] on the main menu.

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

NOTE

Item Description

IP Conguration Congures network settings.

DHCP ON Enables DHCP.

DHCP OFF Disables DHCP.

IP Address Congures the IP address when DHCP is disabled.

Subnet Mask Congures the subnet mask when DHCP is disabled.

Default Gateway Congures the default gateway when DHCP is disabled.

Projector Name

Congures the name of the projector.

The length of the Projector Name can be up to 64

alphanumeric characters. Numbers ‘0-9’ and alphabet ‘a-z’,

‘A-Z’ and symbols can be used.

sysLocation (SNMP)

Congures the location to be referred to when using SNMP.

The length of the sysLocation can be up to 255 alphanumeric

characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can

be used.

sysContact (SNMP)

Congures the contact information to be referred to when

using SNMP.

The length of the sysContact can be up to 255 alphanumeric

characters. Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can

be used.

DNS Server Address Congures the DNS server address.

Conguring and Controlling the Projector via a Web Browser

Port Settings

Displays and congures communication port settings.

Click the [Apply] button to save the settings.

• The new conguration settings are activated after restarting the

network connection. When the conguration settings are changed, you must

restart the network connection. You can restart the network connection by

clicking [Network Restart] on the main menu.

NOTE

Item Description

Network Control Port1

(Port:23) Congures command control port 1 (Port:23).

Port open Click the [Enable] check box to use port 23.

Authentication Click the [Enable] check box when authentication is required

for this port.

Network Control Port2

(Port:9715) Congures command control port 2 (Port:9715).

Port open Click the [Enable] check box to use port 9715.

Authentication Click the [Enable] check box when authentication is required

for this port.

Image Transfer Port

(Port:9716) Congures the image transfer port (Port:9716).

Port open Click the [Enable] check box to use port 9716.

Authentication Click the [Enable] check box when authentication is required

for this port.

SNMP Port Congures the SNMP port.

Port open Click the [Enable] check box to use SNMP.

Trap address Congures the destination of the SNMP trap in IP format.

SMTP Port Congures the SMTP port.

Port open Click the [Enable] check box to use the e-mail function.

Mail Settings

Displays and congures e-mail addressing settings.

Click the [Apply] button to save the settings.

• You can conrm whether the mail settings work correctly using the

[Send Test Mail] button. Please enable Send mail setting before clicking [Send

Test Mail].

• If you connect the projector to an existing network, consult a network

administrator before setting server addresses.

NOTE

Item Description

Send mail

Click the [Enable] check box to use the e-mail function.

Congure the conditions for sending e-mail under Alert

Settings.

SMTP Server IP Address

Congures the address of the mail server in IP format.

• The address allows not only IP address but also domain

name if the valid DNS server is setup in the Network

Settings. The maximum length of host or domain name is up

to 255 characters.

Sender E-mail address

Congures the sender e-mail address.

The length of the sender e-mail address can be up to 255

alphanumeric characters.

Recipient E-mail address

Congures the e-mail address of up to ve recipients. You

can also specify [TO] or [CC] for each address. The length of

the recipient e-mail address can be up to 255 alphanumeric

characters.

Conguring and Controlling the Projector via a Web Browser

Andere Handbücher für CPX305 - XGA LCD Projector

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hitachi Projektor Handbücher

Hitachi

Hitachi CP-X605 Series Bedienungsanleitung

Hitachi

Hitachi CP-X2010 series Technisches Dokument

Hitachi

Hitachi CPX268 - Portable Lcd Projector Bedienungsanleitung

Hitachi

Hitachi CP-X8170 Bedienungsanleitung

Hitachi

Hitachi X1250 - XGA LCD Projector Benutzerhandbuch

Hitachi

Hitachi CP-L750W Bedienungsanleitung

Hitachi

Hitachi LP-WU3500 Bedienungsanleitung

Hitachi

Hitachi CP-X467 Bedienungsanleitung

Hitachi

Hitachi CP-WU9100 Bedienungsanleitung

Hitachi

Hitachi CP-X417 series Bedienungsanleitung

Hitachi

Hitachi CP-AW3506 Bedienungsanleitung

Hitachi

Hitachi CP-SX635 - SXGA+ LCD Projector Bedienungsanleitung

Hitachi

Hitachi CP-X8160 Bedienungsanleitung

Hitachi

Hitachi CP-TW3506 Bedienungsanleitung

Hitachi

Hitachi HOME-1 Technisches Dokument

Hitachi

Hitachi PJ-TX200 Bedienungsanleitung

Hitachi

Hitachi CP-X950WE Bedienungsanleitung

Hitachi

Hitachi CP-RX80 - XGA LCD Projector Bedienungsanleitung

Hitachi

Hitachi LP-TW3001 Bedienungsanleitung

Hitachi

Hitachi MP-AW4001 Bedienungsanleitung

Hitachi

Hitachi PJLC2001 Bedienungsanleitung

Hitachi

Hitachi EDX-3250 Bedienungsanleitung

Hitachi

Hitachi SX1350 - SXGA+ LCD Projector Bedienungsanleitung

Hitachi

Hitachi ED-X30 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Asus

Asus ZenBeam Latte Bedienungsanleitung

Epson

Epson PowerLite 810p Bedienungsanleitung