Hitachi LP-WU9750B Bedienungsanleitung

Projector

LP-WU9750B

User's Manual

Thank you for purchasing this product. Please

read this manual before you operate your

projector. Save it for future reference.

English

Français

Deutsch

Español

Português

English - 2

INDEX

Warning, Notices and Safety Instructions 4

Notice 4

Do not open 4

Description pertaining to FCC Rules Part 15 4

About Waste Electrical and Electronic Equipment 5

Sun light Warning 5

Never look into the projector light source directly 5

Electric shock 5

Do not overload wall outlets/extension cords 6

Cleaning 6

Dampness, smoke, steam, dust, high temperature and direct

exposure to sunlight 6

Ventilation 6

Intrusion of foreign objects 6

Carrying the projector 6

Please install the projector on an even and stable surface 7

Servicing 7

Changing parts 7

Power cord 7

Notices you should read prior to the installation of the

projector 8

Take frequent breaks to let your eyes rest 8

Installation environment for the projector 8

Protect the projector with care 8

Keep the projector's ventilation inlets and outlets free from

obstructions 8

Caution for 3D 10

LASER WARNING 11

CLASS 3R LASER PRODUCT 11

Laser Parameters 11

Product labels 12

Location of laser aperture 15

Interlock switches 15

Name and quantity of toxic/hazardous substances/elements

contained in the product 16

Projector parts and functions 17

Front view 17

Rear view 18

Bottom view 20

Range of effective remote control signal reception 21

Installing batteries in the remote control 21

Installation the projector. 22

1. Orient the projector towards the screen 22

2. Remove the lens PU foam on the projector 22

3. Depending on your area, to select the correct input

voltage. 22

4. Connect the power cord to the projector 22

6. Starting the projector up. 23

7. Adjusting the projector's angle, Lens Shift, Zoom and

Focus 23

8. Correcting keystoning caused by projection angle 23

9. Turning off the projector 24

Throw distance 25

Modes of installation 25

Front Tabletop 25

Front Ceiling 26

Rear Tabletop 26

Rear Ceiling 26

RRear projection - submersive installation 26

Horizontal and vertical lens shift 27

Moving the lens vertically 27

Moving the lens horizontally 27

Connecting the projector to other devices 28

HDMI / DVI connection 28

12V Trigger connection 28

RGB connection 29

HDBaseT connection 29

SDI connection 30

Turning on the projector 30

Changing OSD language 30

Adjusting screen orientation 31

Front Ceiling 31

Rear Tabletop 31

Rear ceiling 32

Adjusting the projector lens 32

Remote control 33

OSD Menu Tree 35

English - 3

OSD Description 38

MAIN 38

Input 38

PinP 39

PinP Selection 39

PinP Position 39

Color Space 40

3D 40

Magnify & Shift 40

No Signal 40

PICTURE 41

Picture Mode 41

Contrast 42

Color 42

Tint 42

Sharpness 42

Color Temperature 44

White Balance 44

Aspect 45

Over Scan 46

Position and Phase 46

Auto Adjust 47

LASER 48

Power Mode 48

Power Level 48

High Altitude 49

ADVANCED 50

Installation 50

Lens Control 50

Lens Memory 51

Lens Centering 51

Gamma 51

Pattern 51

Blanking 53

Edge blending 53

Memory 55

Dynamic Black 55

SETUP 56

Network 56

OSD Setting 57

Infrared Remote 57

Remote ID 57

Start up logo 57

Trigger 57

Auto Search 58

Auto Power Off 58

Direct Power On 58

Language 58

AMX D.D. 58

Web control/ Crestron Control 58

SERVICE 59

Model Name 59

Serial Number 59

Software Version 1 / 2 59

Active Source 59

Signal Format 59

Laser Hours 60

Thermal Status 60

Lens Information 60

Factory Reset 60

Cleaning 61

Cleaning the Cabinet 61

Cleaning the Lens 61

Using the Kensington® Lock 62

Simple troubleshooting 63

LED STATUS 65

Power LED 65

Supported Signal Input Modes 67

SDI formats 68

3D Timing Format 68

Dimensions 69

Communication settings 70

RS-232 Communication 70

Connection 70

1. Protocol 71

2. Command format 71

3. Response code / Error code 72

Communication command table 75

Disclaimer 88

Trademark 88

Warranty and after-service 88

English - 4

Warning, Notices and Safety Instructions

Notice

This product is intended for the adults who have the ability to operate this machine.

Please write down your projector model number and serial number and keep the information for

maintenance purposes in the future. Should the equipment be lost or stolen, the information could also

be used for the police report.

Model number:

Serial number:

missing accessory, contact your dealer immediately.

1. AC Power Cord US 125V*1 4. Remote control *1 7. Printed Manual*1 10. WEEE Manual *1

2. AC Power Cord EU*1 5. AA battery *2 8. EAC Document *1 11. RS232 cable(cross) *1

3. Wire Remote Cable*1 6. CD-ROM *1 9. EU Recycle Sheet *1

Do not open

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

The lightning flash with an arrowhead within a triangle

is intended to tell the user that inside this product

may cause risk of electrical shock to persons.

The exclamation point within a triangle is intended to tell

the user that important operating and/or servicing instructions

are included in the technical documentation for this equipment.

CAUTION / TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER(OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

This is a Class A product. In a domestic environment this product may cause radio interference in

which case the user may be required to take adequate measures.

Description pertaining to FCC Rules Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for a Class A digital device, pursuant

to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy. If not installed and used in

accordance with the instructions, may cause harmful interference to radio or television reception.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Consult the dealer or an experienced radio/TV technician for help.

English - 5

Warning, Notices and Safety Instructions

CAUTION:

operate the equipment.

This Class A digital apparatus meets all requirements of the Canadian ICES-003 Standards.

Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.

About Waste Electrical and Electronic Equipment

The mark is in compliance with the Waste Electrical and Electronic Equipment Directive

2002/96/EC (WEEE).The mark indicates the requirement NOT to dispose the equipment including

any spent or discarded batteries or accumulators as unsorted municipal waste, but use the return and

collection systems available. If the batteries or accumulators included with this equipment, display the

chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than

0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.

Sun light Warning

Avoid using this projector in direct sun light.

Sun light on the projector lens can severely damage the Digital Mirror Devices (DMD™).

Never look into the projector light source directly

When turn on the projector, make sure nobody's eye will effects by the projection of light.

Always avoid to let eyes contact to the light.

As with any bright source, do not stare into the direct beam, RG2 IEC 62471-5:2015

Electric shock

To protect your projector, avoid turning on the projector during lightning storms and unplug it from

the wall outlet. This will prevent sudden electrical surges caused by the lightning from damaging the

projector.

English - 6

Warning, Notices and Safety Instructions

Do not overload wall outlets/extension cords

Pay attention to the current load of the outlet you are using, be it wall outlet or extension cord outlet to

Cleaning

When cleaning the projector, be sure to unplug it from the wall outlet to prevent electric shock.

Do not use liquid or aerosol cleaners. Use a dry/damp cloth with excessive moisture removed for

cleaning. Be sure to use cleaning cloth designed to clean monitors for the projector to prevent damages

to the projector casing due to abrasion.

Dampness, smoke, steam, dust, high temperature and direct exposure

to sunlight

Do not operate the projector in environments where it could be expose to dampness, smoke, steam,

dust, high temperature or direct sunlight. For example: bathroom, kitchen, adjacent to washing

machine, damp basement rooms, electric heaters or similar environments. Keeping or operating the

projector in the above-mentioned environment could lead to discoloration, mold formation, grease or

damages to the projector.

Ventilation

The projector case is designed with slots and openings to remove the heat inside the projector so that it

will not overheat and damage the components. Be sure to operate the projector in an environment with

ideal ventilation and don't operate it on a sofa, rug or other closed-in environments that could obstruct

ventilation.

Intrusion of foreign objects

Be sure to keep all foreign objects away from entering the projector because it could be exposed to

shock. Examples of foreign objects include: cockroach, screws, liquid and so forth.

In addition, never spill liquid into the projector.

medical examination immediately.

Carrying the projector

The projector net weight is 28kg(not include lens). When moving the projector on a cart, be

sure to handle the cart with care as abrupt stops, jolts of excessive force or uneven ground

could lead the projector to topple.

English - 7

Warning, Notices and Safety Instructions

Please install the projector on an even and stable surface

Avoid placing the projector on unstable cart, tripod, table and so forth to prevent the projector from

falling, becoming damaged or causing injuries.

Servicing

Should you encounter problem with the projector, please seek assistance from your local dealer or

be exposed to high voltage or other potential hazards.

No service is allowed except by authorized personnel.

Should you encounter any of the following situation, please unplug your projector from the wall outlet

Damaged power cord or power plug.

If a foreign object has fallen into the projector or if you have spilled water or other liquid into the

projector.

If the projector has been dropped accidentally or damaged.

If you experience noticeably poor performance or malfunctioning with the projector despite having

followed instructions for normal operation.

Changing parts

Should any part of the projector be damaged, check with your servicing personnel that only

remind the servicing personnel to perform safety inspections to ensure that the projector operates

normally.

No maintenance allowed by end user, Do not open the cabinet.

No user servicable part inside.

Power cord

Don't place the projector where the cord can be walked on. This may result in fraying or damage to

the power cord, especially at the plug and the point of connection between the power cord and the

projector.

the projector (refer to the descriptions printed on the power cord). If you are not sure of the power

available at the region you are in, consult your local power company to prevent damages to the

Depending on the country and region you are in, the voltage and type of socket of the wall outlet may

of your own safety.

Connect the ground terminal for the AC inlet of this unit to the ground terminal of the building using

an appropriate power cord (bundled).

Install the projector where you can access the power outlet easily.

English - 8

Warning, Notices and Safety Instructions

Notices you should read prior to the installation of the projector

Take frequent breaks to let your eyes rest

Prolonged viewing of the projector screen could strain your eyes. Please be sure to rest your eyes

adequately.

Installation environment for the projector

You should avoid installing the projector at place of excessive dampness, dust or smoke. If installation

in such environment is unavoidable, be sure to have the interior of the projector

cleaned routinely to prolong the projector's lifecycle. Cleaning of the projector's interior should only be

to clean the inside of the projector by yourself.

If other light source is directly projected onto the projector screen, the color of the picture from the

projector will appear to be pale and the picture quality will be lower. In addition, your eyes would be

more prone to fatigue. Therefore, it is recommended that the projector be installed in places without

direct exposure to sunlight or other sources of intense light.

The ideal operating temperature range for the projector is between 0°C ~ 40°C (32°F ~ 104°F)

The ideal storage temperature range for the projector is between -10°C~ 60°C (14°F ~ 140°F)

When operating the projector at higher altitudes, be sure to manually set the fan mode to "High" or

1219 meters (4000 feet) or higher.

Please refer to " Page 49 : High Altitude "

Protect the projector with care

not fall and cause injuries. Take care to protect the projector's lens from collision, abrasion or other

damages. Be sure to close the lens cover or cover the projector with a dust cover if you need to store

the projector or if it will not be used for an extended time.

Keep the projector's ventilation inlets and outlets free from obstructions

internal structure.

In the event of high temperature due to malfunctioning of the internal cooling fan caused by clogging at the

ventilation inlets and outlets, the projector will activate its automatic protection mode and shutdown. When

this happens, it does not necessary mean that the equipment is malfunctioning. Try to unplug the power cord

from the wall outlet and wait for approximately 15 minutes before operating the projector again (remember

to remove the objects that have caused poor ventilation so that the projector will not go into the protection

mode again).

Description: The regulation of temperature inside the projector by the cooling fan is automatic. And as such,

the sound of cooling fan changing its operating speed does not imply that a problem has occurred with the

projector.

English - 9

Warning, Notices and Safety Instructions

Distance must

50cm(19.7 inch) Lens

If there has the obstacles on projector both sides.

Distance must

30cm(11.8 inch)

Distance must

30cm(11.8 inch)

If there has the obstacles on projector both sides.

Positioning Precautions

This projector can be installed 360° range (include portrait). But life of optical parts will be

shorten as following situation:

1.If the projector installed when the lens faces downward.

2.If the projector installed when the IO connect side upward at the portrait situation.









 









English - 10

Warning, Notices and Safety Instructions

Caution for 3D

Don't let children view the 3D by themselves , please always be accompanied by an adult.

Although more than six years old can view the 3D. But children may not tell you if they are feeling

unwell when viewng 3D content, so always be sure to check with the child.

When viewing 3D content, be sure you are at an appropriate distance from the front of the screen.

Suggest keep least three times the height of the screen away from the screen.

Check that the settings are correct and that the 3D effect is being correctly applied. If the image is

inversed and the left and right eye images are swapped, the 3D effect does not work, which could

cause eye strain or cause you to feel unwell.

3D content not suitable for below situation, it could aggravate their pre-existing conditions.

People with a history of photosensitive epilepsy.

People has heart disease.

Pregnant women.

People with serious illnesses.

People with a history of epileptic seizures.

Suggest stop to view the 3D, if has below situation:

When you feel unwell , tired, sleep deprived, fatigued or inebriated,

The 3D image doubled or not clear.

Enjoying 3D content that rotates, rolls, or shakes, some person may feel they are moving and

trigger a form of “sea sickness”.

Take too long time for viewing 3D content, be sure to take regular breaks to avoid cause eyestrain.

Andere Handbücher für LP-WU9750B

Andere Hitachi Projektor Handbücher

Hitachi

Hitachi X807 - CP XGA LCD Projector Technisches Dokument

Hitachi

Hitachi ED-A220N Bedienungsanleitung

Hitachi

Hitachi CP-X2515WN Bedienungsanleitung

Hitachi

Hitachi CP-RX82Z Technisches Dokument

Hitachi

Hitachi CP-S210 series Bedienungsanleitung

Hitachi

Hitachi CP-X380W Bedienungsanleitung

Hitachi

Hitachi Innovate CP-RX94 Bedienungsanleitung

Hitachi

Hitachi CP-WX4022WN Bedienungsanleitung

Hitachi

Hitachi Projector Installations- und Betriebsanleitung

Hitachi

Hitachi CP-WX3015WN Bedienungsanleitung

Hitachi

Hitachi CP-DX250 guide Bedienungsanleitung

Hitachi

Hitachi CP-EW300N Bedienungsanleitung

Hitachi

Hitachi CP-A300N Bedienungsanleitung

Hitachi

Hitachi CP-S210 series Bedienungsanleitung

Hitachi

Hitachi CP-D10 Series Bedienungsanleitung

Hitachi

Hitachi CP-RX70(M1-20EN) Bedienungsanleitung

Hitachi

Hitachi MP-WU8101W Bedienungsanleitung

Hitachi

Hitachi CP-X385W Bedienungsanleitung

Hitachi

Hitachi CP-X2010N Technisches Dokument

Hitachi

Hitachi CP-X608 Bedienungsanleitung

Hitachi

Hitachi CPX10WN Bedienungsanleitung

Hitachi

Hitachi CP-X25LWN Bedienungsanleitung

Hitachi

Hitachi CPX417 - XGA LCD Projector Montage- und Wartungsanleitung

Hitachi

Hitachi CP-RX70 Bedienungsanleitung

Beliebte Projektor Handbücher anderer Marken

iEmmet

iEmmet MP-312 Bedienungsanleitung

Epson

Epson VS400 Bedienungsanleitung

Sony

Sony VPL-HS10 Marketing Specifications & Features Bedienungsanleitung

Sony

Sony VPL-HW65ES Service-Handbuch

Toshiba

Toshiba TLP-791U Bedienungsanleitung

Philips

Philips LC1341 Referenzhandbuch

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung

NEC

NEC NP600S EDU Bedienungsanleitung

BenQ

BenQ SH753P Bedienungsanleitung

Eiki

Eiki EK-623U series Bedienungsanleitung

Epson

Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung

Epson

Epson PowerLite Home Cinema 705HD Bedienungsanleitung

Christie

Christie LHD700 Bedienungsanleitung

Navitar

Navitar FX Bedienungsanleitung

InFocus

InFocus LitePro 560 Bedienungsanleitung

Sony

Sony SRX-R815P Bedienungsanleitung

Vivitar

Vivitar DP1500 X Bedienungsanleitung

Acer

Acer C20 Series Bedienungsanleitung