Hitachi Performa CP-RS55 Bedienungsanleitung
1
Projector
CP-RS55
User's Manual – Operating Guide
Thank you for purchasing this projector.
WARNING ►Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
About this manual
Various symbols are used in this manual. The meanings of these symbols are
described below.
WARNING This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
CAUTION This symbol indicates information that, if ignored, could result
possibly in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
Trademark acknowledgment
• VGA and XGA are registered trademarks of the International Business Machines
Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• Internet Explorer is a trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
2
About this manual . . . . . . . . . . 1
Contents . . . . . . . . . . . . . . . . . 2
Projector features . . . . . . . . . . 3
About contents of package . . 3
Part names . . . . . . . . . . . . . . . 4
Projector . . . . . . . . . . . . . . . . . . . . . 4
Controls . . . . . . . . . . . . . . . . . . . . . . 5
Remote control . . . . . . . . . . . . . . . . 5
Preparations . . . . . . . . . . . . . . 6
Fastening the lens cover . . . . . . . . . 6
Putting batteries . . . . . . . . . . . . . . . 7
Using the remote control . . . . . . . . . 8
About the filter cover for bottom-up use
. . . 9
Setting up . . . . . . . . . . . . . . . 10
Arrangement . . . . . . . . . . . . . . . . . .11
Adjusting the projector's elevator
. . . 12
Connecting your devices . . . . . . . . 13
Connecting power supply . . . . . . . 15
Power on/off . . . . . . . . . . . . . 16
Turning on the power . . . . . . . . . . . 16
Turning off the power . . . . . . . . . . . 17
Operating . . . . . . . . . . . . . . . 18
Adjusting the volume . . . . . . . . . . . 18
Temporarily muting the sound . . . . 18
Selecting an input signal . . . . . . . . 18
Searching an input signal . . . . . . . 19
Selecting an aspect ratio . . . . . . . . 19
Adjusting the zoom (magnifying
power) . . . . . . . . . . . . . . . . . . . . . . 19
Adjusting the focus . . . . . . . . . . . . 19
Using the automatic adjustment
feature . . . . . . . . . . . . . . . . . . . . . . 20
Adjusting the position . . . . . . . . . . 20
Correcting the keystone distortions
. . . 20
Using the partial magnify feature
. . . 21
Freezing the screen . . . . . . . . . . . . 21
Temporarily blanking the screen
. . . 21
Multifunctional settings . . . . 22
Using the menu function . . . . . . . . 22
Contents
Contents
EASY MENU . . . . . . . . . . . . . . . . . 25
Aspect, Zoom, Keystone, Mode,
Bright, Contrast, Color, Tint,
Sharpness, Whisper, Mirror, Reset,
Filter time, Language,
Go to advanced menu
PICTURE menu . . . . . . . . . . . . . . . 27
Bright, Contrast, Gamma, Color temp,
Color, Tint, Sharpness, Progressive,
My memory
IMAGE menu . . . . . . . . . . . . . . . . . 30
Aspect, Over scan, V. position,
H. position, H. phase, H. size,
Auto adjust execute
INPUT menu . . . . . . . . . . . . . . . . . 32
Color space, Video format, Frame lock,
Information
SETUP menu . . . . . . . . . . . . . . . . . 34
Zoom, Keystone, Whisper, Mirror,
Volume
SCREEN menu . . . . . . . . . . . . . . . 35
Language, Menu position, OSD bright,
Blank, Start up, MyScreen,
MyScreen lock, Message
OPTION menu . . . . . . . . . . . . . . . . 38
Auto search, Auto off, Lamp time,
Filter time, Service
Maintenance . . . . . . . . . . . . . 41
Lamp . . . . . . . . . . . . . . . . . . . . . . . 41
Air filter . . . . . . . . . . . . . . . . . . . . . 43
Other care . . . . . . . . . . . . . . . . . . . 45
Troubleshooting . . . . . . . . . . 46
Related messages . . . . . . . . . . . . . 46
Regarding the indicator lamps . . . . 48
Phenomena that may easily be
mistaken for machine defects . . . . 50
Warranty and after-service
. . . 52
Specifications . . . . . . . . . . . . 52
3
Projector features / About contents of package
Projector features
This projector is used to project various computer signals as well as NTSC / PAL
/ SECAM video signals onto a screen. It requires just a little space for installation
and gets a large image from short distance.
High Brightness
Newly developed 165W UHB (Ultra High Brightness) lamp gives you a higher
brightness image on a screen. The image can be still kept as bright and clean
enough for use in bright rooms.
Low Noise
WHISPER mode is equipped for reducing acoustic noise to realize quieter
operation. It is perfect for use in low luminance rooms where low noise is more
important than brightness.
Compact Body
Even with its many features, this projector is extremely compact and slim,
which gives you more flexibility and usability to use it where you want.
About contents of package
Please see the "Contents of package" of the "User's Manual - Quick Guide". Your
projector should come with the items shown there. Contact immediately your
dealer if anything is missing.
NOTE • Keep the original packing materials for future reshipment. For
moving the projector, be sure to use the original packing material. Use special
caution for the lens part.
4
S-VIDEO VIDEO AUDIO
RGB
CONTROL
K
Part names
Lens (16, 45)
Lens cover (6, 16)
Filter cover (9, 10, 43)
(Air filter and intake vent
are inside.)
Elevator button (12)
Elevator foot (12)
Remote sensor (8)
Focus ring (19)
Vent (10)
AC inlet (15)
Power switch (16, 17)
Elevator button (12)
S-VIDEO port
(14, 18, 19)
VIDEO port (14, 18, 19)
CONTROL port (14)
Part names
Projector
Lamp cover (42)
(Lamp unit is inside.)
Elevator foot (12)
Bottom side
Speaker
Front-Right side
Rear-Left side
Control buttons (5)
Ports
(See below.)
Vent (10)
Ports
AUDIO port (14)
Restart switch (17)
RGB port (14, 18, 19)
Kensington lock slot
5
STANDBY/ON
INPUT
MENU
LAMP
TEMP
POWER
VIDEO RGBSEARCH
FREEZE
OFF
ON
MAGNIFY
ASPECT AUTO BLANK
MUTE
VOLUME
KEYSTONE
POSITION
ESC
ENTER
MENU
RESET
ZOOM
+
-
Part names
LAMP indicator (48)
TEMP indicator (48)
POWER indicator (16, 17, 48)
INPUT button (18)
Cursor buttons
▲,▼,◄,► (18~40)
STANDBY/ON button (16, 17)
Controls
Remote control
SEARCH button (19)
RGB button (18)
VIDEO button (18)
ASPECT button (19)
MAGNIFY
ON button (21)
OFF button (21)
FREEZE button (21)
POSITION button (20)
ESC button (24)
STANDBY/ON button
(16, 17)
AUTO button (20)
BLANK button (21)
VOLUME button (18)
MUTE button (18)
KEYSTONE button (20)
Zoom
+ button (19)
- button (19)
MENU button (22)
Menu cursor buttons
▲,▼,◄,►(18~40)
ENTER button (18~40)
RESET button (24)
6
Preparations
Fastening the lens cover
WARNING ►Do not fasten the lens cover during use or immediately after
use. Handling while the projector is in a high temperature could cause a burn
and/or malfunction to the projector. Before operating, make sure that the power
switch is off, that the power cord is not plugged in, and that the projector is cool
adequately.
To avoid losing, please fasten the lens cover to the projector using the strap.
1. Slowly turn over the projector, so that the bottom is facing up.
2. Fix the strap to the strap ring of projector.
3. Fix the strap to the strap ring of lens cover.
4. Attach the lens cover to the lens of projector, and slowly turn over the
projector, so that the top is facing up.
Preparations
Strap ring
Projector (Bottom side)
Strap
Strap ring
Strap
Strap ring
(1) (2)
Lens cover
Strap
Strap ring
Strap
Strap ring
(1) (2)
Strap ring
7
Preparations
Putting batteries
WARNING ►Always handle the batteries with care and use them only as
directed. Improper use may result in battery explosion, cracking or leakage,
which could result in fire, injury and/or pollution of the surrounding environment.
• Be sure to use only the batteries specified. Do not use batteries of different
types at the same time. Do not mix a new battery with used one.
• Make sure the plus and minus terminals are correctly aligned when loading a
battery.
• Keep a battery away from children and pets.
• Do not recharge, short circuit, solder or disassemble a battery.
• Do not allow a battery in a fire or water. Keep batteries in a dark, cool and dry
place.
• Do not give the battery a physical impact.
• If you observe a leakage of a battery, wipe out the flower and then replace
a battery. If the flower adheres your body or clothes, rinse well with water
immediately.
• Obey the local laws on disposing a battery.
To use the remote control, please load the batteries. Whenever the remote control
starts to malfunction, replace the batteries. If you won’t use the remote control for
an extended period, remove the batteries from the remote control and store them
in a safe place.
1. Remove the battery cover.
Slide back and remove the battery cover in the direction of the arrow.
2. Take old batteries out and/or put new batteries in.
When putting in batteries, align and insert the two AA batteries according to
their plus and minus terminals as indicated in the remote control.
3. Close the battery cover.
Replace the battery cover in the direction of the arrow and snap it back into
place.
8
Preparations
Using the remote control
CAUTION ►Be careful in handling the remote control. Incorrect handling
could cause damage or malfunction.
• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects.
• Remove the batteries from the remote control and store them in a safe place if
you won’t be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts to malfunction.
• When strong lights such as direct sunlight or light from an extremely close
range (such as from an inverter fluorescent lamp) hit the projector’s remote
sensor, the remote control may not function correctly. Adjust the direction of the
projector to keep light from directly hitting the projector’s remote sensor.
The remote control works with the projector’s remote sensor.
• The range of the remote sensor is 3 meters with a 60 degree range (30 degrees
to the left and right of the remote sensor).
• Also a remote signal reflected in the screen etc. may be available. If it is difficult
to send a remote signal to the sensor directly, please try.
• Since the remote control uses infrared light to send signals to the projector
(Class1 LED), be sure to use the remote control in an area free from obstacles
that could block the remote control’s output signal to the projector.
approx. 3 meters
30º
30º
9
Preparations
About the filter cover for bottom-up use
WARNING ►Do not replace the filter cover and/or air filter during use or
immediately after use. Handling while the projector is in a high temperature
could cause a burn and/or malfunction to the projector. Before operating, make
sure that the power switch is off, that the power cord is not plugged in, and that
the projector is cool adequately.
When the projector is installed bottom up, please use the accessory filter cover
for bottom-up use. It is higher than usual filter cover, to keep the space for intake
ventilation. Please change in the following procedure.
1. Disconnect all the connectors and adapters that were connected to the
projector’s ports. Then slowly turn the projector so that the lens-side is facing
up. Please be careful for a projector not to fall. While the projector is placed
lens-side up, hold the projector.
2. Remove the filter cover and the air filter. Hold the knobs while pulling out it.
3. Slowly turn the projector so that the bottom is facing up.
4. Set a new or cleaned air filter to the filter cover for bottom-up use. Make the
claws slide along the rail, and set the air filter into place.
5. Interlocking the tabs, snap the filter cover for bottom-up use into place.
Air filter’s knob
Claws
Filter cover’s knob
Rail of air filter
Filter cover for bottom-up use
Air filter (New or cleaned)
Filter cover for bottom-up use
(with an air filter)
Tabs
10
Setting up
Setting up
WARNING ►Place the projector in a stable position horizontally. A fall or
a turnover could cause an injury and/or damage to the projector. Then using
damaged projector could result in a fire and/or an electric shock.
• Don’t place the projector on an unstable, slant or vibrant surface such as a
wobbly or inclined stand.
• Do not place the projector in the side/front/rear-up position, except care of the
air filter.
• For the projector installed bottom-up, use the accessory filter cover for bottom-
up use. And in the case of a ceiling installation or the like, contact your dealer
before installation.
►Place the projection in a cool place, and pay attention enough to ventilation.
The high temperature of the projector could cause a fire, a burn and/or
malfunction to the projector.
• Don’t stop up, block and cover the projector's vents.
• Keep a space of 30 cm or more between the sides and other objects such as
walls.
• Don’t place the projector on a metallic thing or anything weak in heat.
• Don’t place the projector on a carpet, cushion or bedding.
• Don’t place the projector in direct sunlight or near a hot object such as heater.
• Put nothing about lens and vents of the projector. Put nothing on the projector.
• Put nothing that is sucked or sticks to the bottom of projector. This projector
has some intake vents also on the bottom.
►Do not place the projector on the place that gets wet. Damping the projector
or inserting liquid in the projector could cause a fire, an electric shock and/or
malfunction to the projector.
• Don’t place the projector in a bathroom or the outdoors.
• Put nothing containing the liquid near the projector.
CAUTION ►Avoid a smoky, humid or dusty place. Placing the projector
in such place could cause a fire, an electric shock and/or malfunction to the
projector.
• Don’t place the projector near a humidifier, a smoking space or a kitchen.
• Put nothing containing the liquid near the projector.
►Adjust the direction of the projector to keep light from directly hitting the
projector's remote sensor.
Andere Handbücher für Performa CP-RS55
7
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Hitachi Projektor Handbücher
Hitachi
Hitachi CPX417 - XGA LCD Projector Montage- und Wartungsanleitung
Hitachi
Hitachi CP-X2010 series Technisches Dokument
Hitachi
Hitachi IPJ-AW250N Bedienungsanleitung
Hitachi
Hitachi X308 - CP XGA LCD Projector Technisches Dokument
Hitachi
Hitachi CP-AW251N Bedienungsanleitung
Hitachi
Hitachi Performa CP-RS55 Bedienungsanleitung
Hitachi
Hitachi ED-X30 Bedienungsanleitung
Hitachi
Hitachi CP-S335 series Bedienungsanleitung
Hitachi
Hitachi CP-X2514WN Bedienungsanleitung
Hitachi
Hitachi CP-X3511 Bedienungsanleitung
Hitachi
Hitachi CP-AW2503 Bedienungsanleitung
Hitachi
Hitachi CP-X885 Series Bedienungsanleitung
Hitachi
Hitachi CP-A200 Bedienungsanleitung
Hitachi
Hitachi CP-AW250N Bedienungsanleitung
Hitachi
Hitachi X10000 Series Leitfaden
Hitachi
Hitachi CP-X2515WN Bedienungsanleitung
Hitachi
Hitachi CP-SX5600W Bedienungsanleitung
Hitachi
Hitachi PJ-LC7 Bedienungsanleitung
Hitachi
Hitachi CP-WU9100 Bedienungsanleitung
Hitachi
Hitachi X807 - CP XGA LCD Projector Technisches Dokument
Beliebte Projektor Handbücher anderer Marken
Panasonic
Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Bedienungsanleitung
NEC
NEC NP600S EDU Bedienungsanleitung
BenQ
BenQ SH753P Bedienungsanleitung
Eiki
Eiki EK-623U series Bedienungsanleitung
Epson
Epson PowerLite Pro Cinema 6020UB Bedienungsanleitung
Epson
Epson PowerLite Home Cinema 705HD Bedienungsanleitung
