Hitachi RC-AGS1EA0E Bedienungsanleitung

Remote Controller Manual

Remote Controller manual Page 1~28

To obtain the best performance and ensure years of trouble free use, please read this instruction manual completely.

MODEL

RC-AGS1EA0E

<0024394D>

-1-

Names and Functions of Remote Controller

This controls the operation function and timer setting of the room air conditioner.The range of control

is about 7 meters. lf indoor lighting is controlled electronically, the range of control may be shorter.

Backlight function

• Backlight is to see the LCD readings in the dark.

• On Pressing any key, the LCD panel lights up for a period of approx. 10 seconds. After approx. 10

seconds the light automatically switches off.

• The function is independent of all other functions of the air conditioner.

• The backlight color is white.

Precautions for Use

• Do not put the remote controller under direct sunlight and high temperature.

• Do not drop it on the ﬂoor, and protect it from water.

• If you press the any function button during operation, the air conditioner may stop for about 3

minutes for protection before you can start it again.

Signal Transmission

Off Mode Sign

Mode Selector Button

Use this button to select the

operation mode. Every time

you press this button the

mode will change from (Heat)

(

(Auto) 　 (Cool)

(Dry)　 (Fan) cyclically.

(

Page 4)

Page 14)

On Timer Button

Select the turn ON time.

Page 22)

Off Timer Button

Select the turn OFF time .

Page 22)

LeaveHome Button

( Page 8)

AQtiv-lon Button

Page 18)

My Mode Button

(

Page 24)

Invalid Operation Sign

Shown at invalid setting or

operation

Transmission Sign

The transmission sign blinks

when a signal has been sent.

Fan Speed Button

Select the fan speed.

( Page 4)

On/Off Button

Press this button to start

operation.

Press it again to stop

operation.

( Page 4)

Powerful Button

( Page 8)

Silent Button

( Page 19)

Temperature Button

Room temperature setting.

Value will change quicker

when keep pressing.

( Page 4)

Reset Button

( Page 28)

Up/Down Button

Control the angle of the

horizontal air deflector.

( Page 20)

Left/Right Button

Control the angle of the

Vertical air deflector.

( Page 21)

Wide Reach Button

Control the angle of the

Vertical air deflector.

( Page 21)

SleepSense Button

( Page 17)

FrostWash Button

( Page 9)

Filter Sign Reset Button

( Page 28)

Smart Eco Button

Use this button to set the

Eco mode.

-2-

Press Timer ON button once. or Timer OFF button

Clock symbol stop blinking and Clock time will be display on LCD

screen.

●When Timer ON , Timer OFF or both set then it is not possible to change/set clock time. First Timer ON ,

Timer OFF or both need to cancel.

●If Correct clock time is not set then Timer ON and Timer OFF will not operate correctly.

●At time of Battery replacement/ Reset , Clock time need to set. If it is not set and press any key then default

12:00 will be set.

●At time of Battery replacement / Reset , Need to follow process from step2 onwards.

● symbol is blinking , if no key press then it will come out of Clock During Clock time change/set when

setting with previous set time.

or Timer OFF button for Press and Hold Timer ON button

5 seconds.

segment start blinking on LCD approx. 5 seconds then

symbol start blinking.

Clock

When Clock symbol is in blinking , Press Temperature Up / Down

button to change/set desire time value.

How to set clock

How to Install the Batteries in the Remote Controller

Remove the cover as shown in the ﬁgure and take out the old batteries.

Install the new batteries.

The direction of the batteries should match the marks in the case.

1. Do not use new and old batteries, or different kinds of batteries together.

2. Take out the batteries when you do not use the remote controller for 2 or 3 months.

CAUTION

Push and pull to the

dirction of arrow

Batteries

Cover

NOTE

●Change the batteries when remote controller LCD display restarts on pressing of any key and there is

no response from air conditioner.

-3-

Auto Mode

The device will automatically determine the mode of operation, Heat Mode or Cool Mode depending on the

current room temperature. The selected mode of operation will change when the room temperature varies.

Various Functions

■Auto Restart Control

●If there is a power failure, operation will be automatically restarted when the power is resumed with previous

operation mode and airﬂow direction.

(As the operation is not stopped by remote controller.)

●If you intend not to continue the operation when the power is resumed, switch off the power supply.

When you switch on the circuit breaker, the operation will be automatically restarted with previous operation

mode and airﬂow direction.

Note: 1. If you do not require Auto Restart Control, please consult your sales agent.

2. Auto Restart Control is not available when Timer set.

■As the settings are stored in the memory of the remote controller,

you only have to press the (On/Off) button next time.

Press the Mode Selector Button so that the display indicates

the (Auto) mode of operation.

●When Auto has been selected, the device will automatically

determine the mode of operation, Heat or Cool depending

on the current room temperature.

●If the mode automatically selected by the unit is not

satisfactory, manually change the mode setting (Heat, Dry,

Cool or Fan).

Press the (Fan Speed) button to select Auto, Silent, Low,

Medium, High or Super High.

Press the (On/Off) button.

Operation starts with a beep.

Press the button again to stop operation.

Set the desired room temperature with the Temperature buttons

(the display indicates the setting).

The temperature setting and the actual room temperature may

vary depending on conditions.

Set the desired Fan Speed with the (Fan Speed) button

(the display indicates the setting).

START

STOP

Temperature range can be set between 16.0°C and 32.0°C.

(Auto) (Silent) (Low)

(High) (Medium)(Super High)

-4-

Heat Mode

●Use the device for heating when the outdoor temperature is under 24°C.

When it is too warm (over 24°C), the heating function may not work in order to protect the device.

●In order to keep reliability of the device, please use this device above –15°C of the outdoor

temperature.

Defrosting will be performed about once an hour when frost forms on the heat exchange of the

outdoor unit, for 5~10 minutes each time.

During defrosting operation, the operation lamp blinks in cycle of 2 seconds on and 1 second off.

The maximum time for defrosting is 20 minutes.

(If the piping length used is longer than usual, frost will likely to form.)

Defrosting■

Press the Mode Selector Button so that the display indicates

(Heat).

Set the desired Fan Speed with the (Fan Speed) button

(the display indicates the setting).

Set the desired room temperature with the Temperature buttons

(the display indicates the setting).

The temperature setting and the actual room temperature may

vary depending on conditions.

Temperature range can be set between 16.0°C and 32.0°C.

Press the (On/Off) button. Heating operation starts with

a beep. Press the button again to stop operation.

■As the settings are stored in the memory of the remote controller, you

only have to press the (On/Off) button next time.

■During Auto fan, the fan speed automatically changes as below:

●When the difference between room temperature and setting temperature

is large, fan starts to run at Super High speed.

●After room temperature reaches the preset temperature, fan speed

will be changed to lower speed to obtain optimum room temperature

condition for natural healthy heating.

START

STOP

(Auto) (Silent) (Low)

(High) (Medium)(Super High)

-5-

Dry Mode

■Dehumidifying Function

Use the device for dehumidifying when the room temperature is over 16°C.

When it is under 15°C, the dehumidifying function will not work.

●When the room temperature is higher than the temperature setting: The device will dehumidify the room,

reducing the room temperature to the preset level.

When the room temperature is lower than the temperature setting: Dehumidifying will be performed at the

temperature setting slightly lower than the current room temperature, regardless of the temperature setting.

●The preset room temperature may not be reached depending on the number of people present in the room

or other room conditions.

Set the desired room temperature with the Temperature Buttons

(the display indicates the setting).

The range of 20.0˚C to 26.0˚C is recommended as

the room temperature for dehumidifying.

Temperature range can be set between 16.0°C and

32.0°C.

Press the (On/Off) button. Dehumidifying operation

starts with a beep. Press the button again to stop operation.

■As the settings are stored in the memory of the remote controller, you

only have to press the (On/Off) button next time.

START

STOP

Press the Mode Selector Button so that the display

indicates (Dry).

The fan speed is set at Auto.

Press (Fan Speed) button to select Silent, Low or Auto fan

speed.

-6-

Cool Mode

Use the device for cooling when the outdoor temperature is -10 to 46°C.

If humidity is very high (over 80%) indoors, some dew may form on the air outlet grille of the indoor unit.

Press the Mode Selector Button so that the display indicates

(Cool).

Set the desired Fan Speed with the (Fan Speed) button (the

display indicates the setting).

Set the desired room temperature with the Temperature Buttons

(the display indicates the setting).

The temperature setting and the actual room temperature may vary

depending on conditions.

Press the (On/Off) button. Cooling operation starts with a

beep. Press the button again to stop operation. The cooling function

does not start if the temperature setting is higher than the current

room temperature (even though the (Operation) lamp lights).

The cooling function will start as soon as you set the temperature

below the current room temperature.

START

STOP

■As the settings are stored in memory in the remote controller, you only

have to press the (On/Off) button next time.

■During Auto fan, the fan speed automatically changes as below:

● When the difference between room temperature and setting tem-

perature is large, fan starts to run at Super High speed.

● After room temperature reaches the preset temperature, fan speed

will be changed to lower speed to obtain optimum room temperature

condition for natural healthy cooling.

Temperature range can be set between 16.0°C and 32.0°C.

(Auto) (Silent) (Low)

(High) (Medium)(Super High)

-7-

Powerful Operation

• During Powerful operation, cooler or warmer air will be blown out from indoor unit for Cooling or

Heating operation respectively.

NOTE

•

Press the (Powerful) button during operation.

• " " is displayed on the LCD.

Powerful operation ends in 20 minutes. Then the system

automatically operates with the previous settings used before

Powerful operation.

START

Press the

• " " disappears from the LCD.

CANCEL

•Press the (On/Off) button. or

(Powerful) button again.

•During Leave Home operation, fan speed and horizontal and vertical air deflector position cannot be

changed.

•Timer function will be cancel if LeaveHome key press.

•Powerful , SleepSense , Smart Eco , Timer Function , Silent , My Mode operations are disable.

Prevent the room temperature from falling too much when no one is at home .The initial setting

temperature is 10.0℃and the temperature range can be set between 10.0℃and 16.0℃.

Press (LeaveHome) button during stop or

operation.

Room temperature is set at 10.0℃ and heating operation

starts.

Set the desired room temperature with the Temperature

buttons.Temperature range can be set between 10.0℃

and 16.0℃.

• " ", " ", " ", "Set Temperature" is

displayed on the LCD.

(On/Off) button. orPress the

(LeaveHome) button again.Press the

Change to other Operation Mode.

START

CANCEL

performs at maximum power.

By pressing (Powerful) button during Auto, Heat, Dry, Cool, or Fan operation, the air conditioner

Powerful

•When SleepSense Smart Eco operation, LeaveHome Operation,Silent Mode or My mode is

selected , Powerful Operation will be cancelled.

• During Powerful operation, capacity of the air conditioner will not increase

– if the air conditioner is already running at maximum capacity.

– just before defrost operation (when the air conditioner is running in Heating operation).

LeaveHome Operation

NOTE

-8-

●

The process of indoor FrostWash

●lamp on the indoor unit lights up during FrostWash operation.

●

●In order to protect the product, FrostWash function cannot be carried out again for about 60 minutes after

FrostWash operation is completed.

" "

The dust and dirt adhering to indoor heat exchanger which is the cause of the smell. They are washed away

by freezing and thawing of the heat exchanger.

FrostWash function can work when the outdoor temperature is 1℃ to 43℃and Indoor humidity is 30% to 70%.

Operation is started

FrostWash operation Unit remain in standby mode

120min (max)

Operation is

stopped FrostWash ends

is pressed

Normal operation

Indoor FrostWash operation

-9-

■ Indoor FrostWash(Manual Mode)

When the unit is off, press (FrostWash) button, manual FrostWash will start.

■ How to start and cancel indoor FrostWash (Manual mode).

display on LCD screen.

" lamp light up on the

●After one hour, "

indoor unit will stop

" disappears from the LCD. After about two hours, the

operation.

●In order to protect the product, FrostWash function cannot be carried out

again for about 60 minutes after the FrostWash operation is completed.

●Press the FrostWash ,nottub FrostWash

FrostWash operation start with beep sound and "

indoor unit.

●Press the (On/Off) button, the operation will stop.

" " lamp on the indoor unit turns off.

Precautions for Use

●Do not open windows or doors during operation. Water will condense on the air deflector and

drips down occasionally. This will wet your furniture.

●Do not open or remove the front panel during operation. It may cause injury or malfunction.

●FrostWash operation does not wash away all dust and dirt.

●

Hissing, fizzy or squeaking noise may generate during FrostWash operation.

●If the air conditioner is continuously running, FrostWash function is not effective.

●During FrostWash operation, if power is turned off and then power is restored, FrostWash function will not

restart.

●After turning on the power, please wait a moment if you want to start FrostWash.

●

-10-

●

120min (max)

Indoor FrostWash auto start conditions

■ Indoor FrostWash(Auto Mode)

■How to enable FrostWash (Auto) and Fan Reverse (Auto)

■How to disable FrostWash (Auto) and Fan Reverse (Auto)

FrostWash (Auto Mode) and Fan Reverse (Auto Mode)

Note : Frostwash (Auto Mode) and Fan Reverse (Auto Mode) all set and cancel by Temperature Up button

FrostWash (Auto) and Fan Reverse (Auto) enable.

When FrostWash (Auto) and Fan Reverse (Auto) is enabled,

If FrostWash (Auto

)

and Fan Reverse (Auto

)

is displayed on the LCD.

is disappeared on the LCD.

When FrostWash (Auto) and Fan Reverse (Auto) is disable,

or Down button and Frostwash button combination as above.

FrostWash (Auto) and Fan Reverse (Auto) disable.

Inhaltsverzeichnis

Andere Hitachi Fernbedienung Handbücher

Hitachi

Hitachi PC-2H2 Bedienungsanleitung

Hitachi

Hitachi RAR-5F1 Bedienungsanleitung

Hitachi

Hitachi RAR-5E2 Bedienungsanleitung

Hitachi

Hitachi RC-BGH1FA0G Bedienungsanleitung

Hitachi

Hitachi RAR-3R5 Bedienungsanleitung

Hitachi

Hitachi PC-ART Bedienungsanleitung

Hitachi

Hitachi PC-ARH1E Bedienungsanleitung

Hitachi

Hitachi SPX-RCK3 Bedienungsanleitung

Hitachi

Hitachi PC-ART Bedienungsanleitung

Hitachi

Hitachi PC-ARFH1E Bedienungsanleitung

Hitachi

Hitachi RAR-M0A5 Bedienungsanleitung

Hitachi

Hitachi RC-AGU1EA0G Bedienungsanleitung

Hitachi

Hitachi PC-ARFG1-A Bedienungsanleitung

Hitachi

Hitachi PC-ARFP1E Bedienungsanleitung

Hitachi

Hitachi SPX-RCK2 Bedienungsanleitung

Hitachi

Hitachi RAR-6N2 Bedienungsanleitung

Hitachi

Hitachi RAR-7PE1 Bedienungsanleitung

Hitachi

Hitachi PC-ARFH1E-02 Bedienungsanleitung

Hitachi

Hitachi RAR-5F1 Bedienungsanleitung

Hitachi

Hitachi SPX-RCK5 Bedienungsanleitung

Hitachi

Hitachi SPX-RCDA Bedienungsanleitung

Hitachi

Hitachi REMOTE OPERATOR WOP Bedienungsanleitung

Hitachi

Hitachi airPoint Room 700 Bedienungsanleitung

Hitachi

Hitachi PC-ARFG-E Bedienungsanleitung

Beliebte Fernbedienung Handbücher anderer Marken

Panasonic

Panasonic EUR7622KB0 Bedienungsanleitung

Bang & Olufsen

Bang & Olufsen Beo4 Bedienungsanleitung

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Bedienungsanleitung

FUTABA

FUTABA 9ZAP - PART2 Bedienungsanleitung

HR Matic

HR Matic HR MULTI 3 Bedienungsanleitung

Yamaha

Yamaha ACC-GNRST-30-20 Bedienungsanleitung

Marantz

Marantz RC101 Bedienungsanleitung

Anritsu

Anritsu MP1777A Bedienungsanleitung

Niles

Niles WVC100 Fehlerbehebungshandbuch

Bang & Olufsen

Bang & Olufsen BEO6 Bedienungsanleitung

GE 94901 Bedienungsanleitung

Onbon

Onbon YQ1-75 Bedienungsanleitung

FUTABA

FUTABA R7108SB Montageanleitung

Invacare

Invacare G91S Bedienungsanleitung

JR Racing

JR Racing XR2 Bedienungsanleitung

Philips

Philips SBCRU130/00U Bedienungsanleitung

Philips

Philips Prestigo SRT9320 Bedienungsanleitung

Vicon

Vicon VNCTRL-1 Bedienungsanleitung