Hitachi C 7SS Handbuch

[ SAME FEATURES AS THE CONVENTIONAL MODELS ]

Accurate and sturdy aluminum die-cast base

(Steel plate base available depending on

destination)

Double-insulated construction

[ NEW FEATURES ]

Compact and lightweight design

Power-plus heavy-duty motor

Sawdust rear-discharge type

(Dust collector installable)

Blower function

Although our C 6MFA/C 7MFA Circular Saws now available on the European market are highly evaluated as

reasonably priced, light-load products, there is also growing demand for less expensive and lighter circular saw

products. In order to expand the market share of our circular saw series products, we consequently released the

C 6SS/C 7SS Circular Saws in wider regions including Europe, as a low-priced series developed by balancing

price and performance.

LIST No.

C 6SS: E519

C 7SS: E520

Jun. 2009

PRODUCT NAME

Hitachi Circular Saw

Models 165 mm (6-1/2”) C 6SS

190 mm (7-1/2”) C 7SS

• Cutting of various wood materials

MARKETING OBJECTIVE

APPLICATIONS

SELLING POINTS

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

Sales Division

REMARK:

• For more information about HANDLING INSTRUCTIONS, visit our website at:

http://www.hitachi-koki.com/manual_view_export/

• Throughout this TECHNICAL DATA AND SERVICE MANUAL, a symbol (s) is (are) used in the place of

company name (s) and model name (s) of our competitor (s). The symbol (s) utilized here is (are) as

follows:

Competitors

Symbols Utilized

Company Name Model Name

D1 MAKTEC MT560

D2 MAKTEC MT580

CONTENTS

Page

SELLING POINTS ------------------------------------------------------------------------------------------------------------- 1

SPECIFICATIONS ------------------------------------------------------------------------------------------------------------- 2

1. Specifications ----------------------------------------------------------------------------------------------------- 2

COMPARISONS WITH SIMILARPRODUCTS -------------------------------------------------------------------------- 3

1. Comparison of Specifications -------------------------------------------------------------------------------- 3

PRECAUTIONS ON SALES PROMOTION ----------------------------------------------------------------------------- 5

1. Safety Instructions ---------------------------------------------------------------------------------------------- 5

REPAIR GUIDE ----------------------------------------------------------------------------------------------------------------- 6

1. Precautions on Disassembly and Reassembly ---------------------------------------------------------- 6

STANDARD REPAIR TIME (UNIT) SCHEDULES ------------------------------------------------------------------- 13

Assembly Diagram for C 6SS

Assembly Diagram for C 7SS

-1-

Compact and lightweight design

The Models C 6SS and C 7SS adopt the highly evaluated

compact design of the C 6MFA/C 7MFA, and incorporate a

light-weight, highly rigid lower guard and a side handle

made of resin to reduce overall weight.

Power-plus heavy-duty motor

The cooling flow path is enhanced to increase power.

(For 230/240 V)

Sawdust rear-discharge type

(Dust collector installable)

A sawdust rear-discharge method is adopted to prevent

sawdust from accumulating on the work face. Simply

attaching an optional dust collector will ensure a clean

environment with minimal scattering of sawdust.

Blower function

The Models C 6SS and C 7SS come with the blower function to blow sawdust away using cooling air of the

motor.

Accurate and sturdy aluminum die-cast base

(Steel plate base available depending on destination)

Thanks to the sturdy aluminum die-cast base, the Models C 6SS and C 7SS can cut workpieces accurately,

resulting in smooth cut workpiece surfaces.

Double-insulated construction

Grounding is not required due to the double-insulated construction.

Refer to the Technical Data and Service Manuals for current models.

Refer to the Technical Data and Service Manuals for current Models C 6MFA and C 7MFA.

Dust collector

SELLING POINTS

Plastic side handle

Plastic lower guard

C 6SS / C 7SS : 1,050W

C 6MFA / C 7MFA : 1,010W

C 6MFA / List No. E502 C 7MFA / List No. E503

C 6SF / List No. 0597 C 7SF / List No. 0598

C 6MF / List No. 0599 C 7MF / List No. E501

-2-

1. Specifications

Model C 6SS C 7SS

Saw blade diameter 165 mm (6-1/2") 190 mm (7-1/2")

at 90° 0 to 57 mm (0 to 2-1/4") 0 to 68 mm (0 to 2-11/16")

Cutting depth

at 45° Max. 38 mm (1-1/2") Max. 46 mm (1-13/16")

Power source AC single phase 50/60 Hz

Type of motor AC single phase commutator motor

Type of switch Trigger switch

Housing

Handle cover

Lower guard

Polycarbonate resin

Gear cover Cast aluminum

Enclosure

Base Cast aluminum / Sheet steel

*1Voltage (V) 110 120 220 230 240

*1Current (A) 9.6 9.2 5.0 4.8 4.6

Power input 1,010W 1,050W

No-load Rotation speed 5,600/min. 5,900/min. 5,950/min. 5,650/min.

Aluminum

base 3.2 kg (7.1 lbs.) 3.4 kg (7.5 lbs.)

Net Steel base 3.1 kg (6.8 lbs.) 3.3 kg (7.3 lbs.)

Aluminum

base 4.0 kg (8.8 lbs.) 4.3 kg (9.5 lbs.)

Weight

Gross

Steel base 3.9 kg (8.6 lbs.) 4.2 kg (9.3 lbs.)

Packaging Corrugated cardboard box / Plastic case and corrugated cardboard sleeve

Type Two-core cabtire cable

Cord

Overall length 2 m (6.6 ft.)

Standard equipment

Tungsten carbide tipped (TCT) saw blade ------------------------------------- 1

Parallel guide -------------------------------------------------------------------------- 1

Hex. bar wrench ---------------------------------------------------------------------- 1

Case (GBR only) ----------------------------------------------------------------------1

*1Check the tool name plate to confirm the rating, as it is subjected to change by area.

*2The net weight does not include the cord and the saw blade.

SPECIFICATIONS

-3-

1. Comparison of Specifications

(1) 165mm (6") dia. saw blade (Superior specifications: )

Maker HITACHI

Model C 6SS C 6MFA C 6SF C 6MF

Saw blade diameter mm 165 (6-1/2") 165 (6-1/2")

90㩩mm 57 (2-1/4") 56 (2-7/32")

Max.cutting

depth 45㩩mm 38 (1-1/2") 37 (1-15/32")

Power input W *11,050 1,010 1,050

No-load rotation speed /min. 5,500 5,000 4,700

Overall length mm 276 (10-7/8") 270 (10-5/8") 282 (11-3/32") 273 (10-3/4")

Catalog

Weight kg *23.2 (7.0 lbs.) 3.4 (7.5 lbs.) 3.0 (6.6 lbs.) 3.4 (7.5 lbs.)

Motor size mm ĭ72 x 40 ĭ72 x 45

No-load noise dB 85 84

Parallel adjustment --- None Provided None

Installation of dust collector --- Provided None None

Riving knife --- None None

Soft touch handle --- None None

Method of fixing gradient

angle --- Wing bolt Wing bolt

Method of fixing cut depth --- Lever Wing bolt Wing bolt

Housing --- Resin Resin

Handle cover --- Resin Resin

Gear cover --- Aluminum Aluminum

Lower guard --- Resin Aluminum Resin Resin

Lower guard lever --- Resin Steel Resin Resin

Angle lever / wing bolt --- Resin Resin

Cutting depth lever /

wing bolt --- Resin Resin

Material

Base --- Aluminum

or Steel Aluminum Steel Aluminum Steel

Length (L) mm 276 (10-7/8") 270 (10-5/8") 282 (11-3/32") 273 (10-3/4")

Height (H) mm 230 (9-1/16") 229 (9-1/64") 230 (9-1/16")

Width (W) mm 210 (8-1/4") 231 (9-3/32")

With side handle kg 3.2 (7.0 lbs.) 3.4 (7.5 lbs.) --- --- ---

Weight

Without side handle kg 3.1 (6.8 lbs.) --- 3.0 (6.6 lbs.) 3.4 (7.5 lbs.)

* This rating is based on the 230 V motor.

*1110 V specification = 1,010 W

*2Mass of aluminum base specification [ Steel base spec: 3.1 kg (6.8 lbs.) ]

COMPARISONS WITH SIMILAR PRODUCTS

-4-

(2) 190mm (7-1/2") dia. saw blade (Superior specifications: )

Maker HITACHI

Model C 7SS C 7MFA C 7SF C 7MF

Saw blade diameter mm 190 (7-1/2") 185 (7-1/4")

90㩩mm 68 (2-11/16") 66 (2-19/32")

Max.cutting

depth 45㩩mm 46 (1-13/16") 44 (1-3/4")

Power input W *11,050 1,010 1,050 1,050

No-load rotation speed /min. 5,500 5,000 4,700

Overall length mm 291

(

11-15/32"

)

282

(

11-3/32"

)

295

(

11-19/32"

)

286

(

11-1/4"

)

Catalog

Weight kg *23.4 (7.5 lbs.) 3.6 (7.9 lbs.) 3.3 (7.3 lbs.) 3.5 (7.7 lbs.)

Motor size mm ĭ72 x 40 ĭ72 x 45

No-load noise dB 85 84.5

Parallel adjustment --- None Provided None

Installation of dust collector --- Provided None None

Riving knife --- None None

Soft touch handle --- None None

Method of fixing gradient

angle --- Wing bolt Wing bolt

Method of fixing cut depth --- Lever Wing bolt Wing bolt

Housing --- Resin Resin

Handle cover --- Resin Resin

Gear cover --- Aluminum Aluminum

Lower guard --- Resin Aluminum Resin Resin

Lower guard lever --- Resin Steel Resin Resin

Angle lever / wing bolt --- Resin Resin

Cutting depth lever /

wing bolt --- Resin Resin

Material

Base --- Aluminum

or Steel Aluminum Steel Aluminum Steel

Length (L) mm 291

(

11-15/32"

)

282

(

11-3/32"

)

295

(

11-19/32"

)

286

(

11-1/4"

)

Height (H) mm 242

(

9-17/32"

)

245

(

9-21/32"

)

Width (W) mm 210

(

8-1/4"

)

231

(

9-3/32"

)

With side handle kg 3.4 (7.5 lbs.) 3.6 (7.9 lbs.) --- --- ---

Weight

Without side handle kg 3.3 (7.3 lbs.) --- 3.3 (7.3 lbs.) 3.5 (7.7 lbs.)

* This rating is based on the 230 V motor.

*1110 V specification = 1,010 W

*2Mass of aluminum base specification [ Steel base spec: 3.3 kg (7.3 lbs.) ]

-5-

1. Safety Instructions

In the interest of promoting the safest and most efficient use of the C 6SS and C 7SS Circular Saws by all

of our customers, it is very important when concluding a sale that the salesperson carefully ensure that the

buyer seriously recognizes the importance of the Instruction Manual, and fully understands the precautions

listed on the Warning Labels, Warning Signs and Caution Labels attached to each tool.

A. Instruction manual

Although every effort is made in each step of design, manufacture, and inspection to provide protection

against safety hazards, the dangers inherent in the use of any electric power tool cannot be completely

eliminated. Accordingly, the Instruction Manual lists general precautions and suggestions on the use of

electric power tools, and specific precautions and suggestions on the use of the circular saw in order to

enhance the safe, efficient use of the tool by the customer. Salespersons must be thoroughly familiar

with the contents of the Instruction Manual in order to offer appropriate guidance to customers during

sales promotion activities.

B. Warning labels and caution labels

(1) Precautions on the name plate

The Models C 6SS and C 7SS are both furnished with a Name Plate listing the following precautions

[ For the Europe ]

[ For Australia and New Zealand ]

[ For China ]

[ For Taiwan ]

[ For Latin America ]

PRECAUTIONS ON SALES PROMOTION

-6-

Before disassembly, be sure to remove the saw blade to prevent damage to the cutting edge or personal

injury due to the saw blade.

1. Precautions on Disassembly and Reassembly

The disassembly and reassembly procedures are described below, as well as certain precautions. The

numbers in the descriptions below correspond to item numbers in the Parts List for all the models. In

disassembly, reassembly or other work, the Base [68] should be carefully handled to prevent any loss of

accuracy for each part, such as flatness of the bottom surface.

1. Removal of the Protective Cover

(a) Detach the hook of the Return Spring [6] from the Protective Cover [5].

(b) Loosen the Seal Lock Flat Hd. Screw M3 x 12 [9] that secures the Bearing Cover [8] in place, and then

remove the Bearing Cover [8] and Protective Cover [5].

2. Removal of the Bearing Holder

Loosen the Seal Lock Flat Hd. Screws M5 x 12 [4], and then remove the Bearing Holder [3] together with

the Spindle and Gear Set [2].

3. Removal of the Spindle and Gear Set

Secure the Bearing Holder [3] in a cylindrical jig having

an inner diameter of 42 to 43 mm (about 1-23/32"),

and then push the top end of the Spindle and Gear

Set [2] to remove it.

NOTE:

Once removed, a gear can no longer be used due

to lack of engagement. It must be replaced by a

new Spindle and Gear Set [2].

4. Removal of the Housing Ass’y

(a) Use a flat-blade screwdriver to loosen the Brush Caps [34] and then remove the Carbon Brushes [33].

(b) Loosen the Machine Screws (W/Washers) M5 x 45 (Black) [15] that secure the Housing Ass'y [30] in

place, and then remove the Housing Ass'y [30] and Gear Cover Ass'y [26].

Disassembly

Fig. 1

REPAIR GUIDE

Bearing Holder [3] Spindle and Gear Set [2]

-7-

5. Removal of the Armature

(a) Remove the Lock Lever [43] and tap the end surface of the Housing Ass'y [30] with a wooden hammer.

The Armature [23] and the Fan Guide [22] can then be removed.

(b) Remove the Fan Guide [22], Thrust Washer [19] and Bearing Lock [18].

[20], and then remove Washer (A) [21].

6. Removal of the Stator Ass’y

(a) Loosen the two Hex. Hd. Tapping Screws D5 x 55 [42].

(b) Remove the two Brush Terminals [39] from the brush holders of the Housing Ass'y [30].

[38].

Fig. 2

Fig. 3

Housing Ass'y [30]

Hex. Hd. Tapping Screw D5 x 55 [42]

Brush Terminals [39]

Stator Ass'y [38]

Ball Bearing 6000VVCMPS2L [44]

rmature [23]

Washer (A) [21]

Lock Lever [43]

Ball Bearing 608VVC2PS2L [20]

Thrust Washer [19]

Bearing Lock [18]

Fan Guide [22]

Inhaltsverzeichnis

Andere Hitachi Gesehen Handbücher

Hitachi

Hitachi C 10RA2 Bedienerhandbuch

Hitachi

Hitachi C 10FSB Bedienungsanleitung

Hitachi

Hitachi C 10RD Bedienerhandbuch

Hitachi

Hitachi CR 13V2 Bedienungsanleitung

Hitachi

Hitachi C 6 Bedienungsanleitung

Hitachi

Hitachi CR18DLP4 - 18V Li-Ion Reciprocating Saw Bedienungsanleitung

Hitachi

Hitachi C10LA - 10" Cabinet Saw Bedienungsanleitung

Hitachi

Hitachi C 18DSL Bedienungsanleitung

Hitachi

Hitachi CD 7 Bedienungsanleitung

Hitachi

Hitachi CC 14SC Bedienerhandbuch

Hitachi

Hitachi C 10FSH Bedienungsanleitung

Hitachi

Hitachi C 5YA Bedienungsanleitung

Hitachi

Hitachi CR 18DGL Bedienungsanleitung

Hitachi

Hitachi C8 Bedienungsanleitung

Hitachi

Hitachi C 7SB2 Fehlerbehebungshandbuch

Hitachi

Hitachi CC 14SF Bedienungsanleitung

Hitachi

Hitachi CR 13V2 Handbuch

Hitachi

Hitachi C 10FCB Gebrauchsanweisung

Hitachi

Hitachi CC14SF - Power Tools 14'' Heavy-Duty Cut-Off... Bedienungsanleitung

Hitachi

Hitachi C7U Bedienungsanleitung

Hitachi

Hitachi C 10FCH2 Bedienungsanleitung

Hitachi

Hitachi C 7BD2 Bedienungsanleitung

Hitachi

Hitachi CR 13V2 Bedienungsanleitung

Hitachi

Hitachi C 10RA2 Bedienungsanleitung

Beliebte Gesehen Handbücher anderer Marken

RIDGID

RIDGID BS1400 Bedienungsanleitung

ATIKA

ATIKA BWS 400-2 Bedienungsanleitung

RGC

RGC FS20 Bedienungsanleitung

Makita

Makita M2300 Bedienungsanleitung

Optimum

Optimum OPTisaw CS 275 Bedienungsanleitung

Makita

Makita BPB180 Bedienungsanleitung

Stihl

Stihl MS 462 C-M Bedienungsanleitung

AEG

AEG TS 250 K Bedienungsanleitung

Meec tools

Meec tools 004665 Bedienungsanleitung

Makita

Makita LS1018L Bedienungsanleitung

Ryobi

Ryobi RCS1400 Bedienungsanleitung

DeWalt

DeWalt DCS391 Bedienungsanleitung

Sealey

Sealey SA72 Bedienungsanleitung

skilsaw

skilsaw SPT88 Montageanleitung

Urrea

Urrea SI810 Abmessungen und Installationsanleitung

EINHELL

EINHELL BKG 210/1 Bedienungsanleitung

Altrad

Altrad BELLE RANGER 450 Bedienungsanleitung

Porter-Cable

Porter-Cable 725 Bedienungsanleitung