Hitachi Freedom Storage Lightning 9900 V series Administratorhandbuch

Hitachi Freedom Stora

e™

Lightning 9900™ V Series

Remote Console Error Codes

Hitachi Lightning 9900™ V Series Remote Console Error Codes iii

Notice: No part of this publication may be reproduced or transmitted in any form or by any

electronic or mechanical means, including photocopying and recording, or stored in a

database or retrieval system for any purpose, without the express written permission of

Hitachi Data Systems Corporation.

Hitachi Data Systems reserves the right to make changes to this document at any time

without notice and assumes no responsibility for its use. Hitachi Data Systems products and

services can only be ordered under the terms and conditions of Hitachi Data Systems’

applicable agreements, including license agreements. All of the features described in this

document may not be currently available. Refer to the most recent product announcement

or contact your Hitachi Data Systems representative for information on feature and product

availability.

This document contains the most current information available at the time of publication.

When new and/or revised information becomes available, this entire document will be

updated and distributed to all registered users.

Trademarks

Hitachi Data Systems is a registered trademark and service mark of Hitachi, Ltd. The Hitachi

Data Systems design mark is a trademark and service mark of Hitachi, Ltd.

Hitachi Freedom Storage and Lightning 9900 are trademarks of Hitachi Data Systems

Corporation.

S/390 is a registered trademark of International Business Machines Corporation.

All other brand or product names are or may be registered trademarks, trademarks or

service marks of and are used to identify products or services of their respective owners.

Notice of Export Controls

Export of technical data contained in this document may require an export license from the

United States government and/or the government of Japan. Contact the Hitachi Data

Systems Legal Department for any export compliance questions.

Document Revision Level

Revision Date Description

MK-92RD132-P April 2002 Preliminary Release

MK-92RD132-0 May 2002 Initial Release

iv Preface

Source Documents for this Revision

 Ecd45d0a.doc (RSD source document)

Changes in this Revision

 Added description of Remote Console messages (new section 1.1).

 Added severity level N and failure level 7 (section 1.2).

 Added error codes: 0001 5075, 0001 5508, 0001 5509, 0002 5510, 0003 2085-2094,

0405 5013, 1110 9080, 3010 9019, 5310 1110.

 Revised message text and recommended action for error codes: 0002 2016, 0003 2085-

2094, 0110 5085, 1110 1110.

Referenced Documents

 Hitachi Lightning 9900™ V Series User and Reference Guide, MK-92RD100

 Hitachi Lightning 9900™ V Series Hitachi Remote Console – Storage Navigator User’s

Guide, MK-92RD101

Hitachi Lightning 9900™ V Series Remote Console Error Codes v

Preface

This document presents a list of the error codes and error messages for the Lightning 9900™

V Series Remote Console and provides recommended action for each error condition. This

document assumes that:

 the user has a background in data processing and understands direct-access storage

device (DASD) subsystems and their basic functions, and

 the user is familiar with the Hitachi Freedom Storage™ Lightning 9900™ V Series array

subsystem, and

 the user is familiar with the Hitachi Remote Console – Storage Navigator software for the

Lightning 9900™ V Series subsystem.

For further information on the Lightning 9900™ V Series subsystem, please refer to the

Hitachi Lightning 9900™ V Series User and Reference Guide (MK-92RD100), or contact your

Hitachi Data Systems account team.

For further information on the Hitachi Remote Console – Storage Navigator software, please

refer to the Hitachi Lightning 9900™ V Series Hitachi Remote Console – Storage Navigator

User’s Guide (MK-92RD101).

Note: In this document the term “9900V” refers to the entire Hitachi Lightning 9900™ V Series

subsystem family, unless otherwise noted.

Note: The use of the Lightning 9900™ V Series subsystem, Hitachi Remote Console – Storage

Navigator software, and all other Hitachi Data Systems products is governed by the terms of

your license agreement(s) with Hitachi Data Systems.

Microcode Level

This document revision applies to 9900V microcode versions 21-01-xx and higher.

COMMENTS

Please send us your comments on this document: [email protected].

Make sure to include the document title, number, and revision.

Please refer to specific page(s) and paragraph(s) whenever possible.

(All comments become the property of Hitachi Data Systems Corporation.)

Thank you!

vi Preface

Hitachi Lightning 9900™ V Series Remote Console Error Codes vii

Contents

Chapter 1 Remote Console Messages and Error Codes

1.1 RemoteConsoleMessages ............................................. 1

1.2 ErrorCodes ........................................................ 2

Acronyms and Abbreviations........................................................ 73

viii Contents

Hitachi Lightning 9900™ V Series Remote Console Error Codes 1

Chapter 1 Remote Console Messages and Error Codes

1.1 Remote Console Messages

Figure 1.1 shows a typical message panel displayed by the Hitachi Lightning 9900™ V Series

Remote Console – Storage Navigator software.

Figure 1.1 Sample Error Message

All 9900V message panels display the following information:

 Message level:

Information

Warning

Fatal error

The server is unable to accept the request from the Remote Console.

One possible cause is that some processing is in progress at the server. This

message does not indicate an error.

 Message text: Descriptive text, may include variables %s (character string) and %d

(numeral). The values of these variables are determined when processing is performed.

 Part code: The ID of the application that issued the message. In Figure 1.1 the part

code is 110.

 Message number: decimal number within the range of 0000 to 9999. In Figure 1.1 the

message number is 9102.

2 Chapter 1 Error Codes

1.2 Error Codes

Table 1.1 lists the error codes and error messages for the Lightning 9900™ V Series Remote

Console and provides recommended action for the error conditions. Table 1.1 also provides

the severity level and failure level of each error condition.

Severity Levels. The severity levels for the 9900V error codes are:

 I: Information

 E: Error

 W: Warning

 N: The server is unable to accept the request from the Remote Console.

One possible cause is that some processing is in progress at the server. This message

does not indicate an error.

Failure Levels. The failure levels for the 9900V error codes are:

 O: No Error

 1: Select MSG OK to end forcibly

 2: Exit is valid only

 3: Refresh/Exit is valid only

 4: To make refresh possible

 5: No status change

 6: No change with refreshing automatically

 7: Remote Console will automatically be switched to view mode. If necessary, you must

change the mode to modify mode.

Table 1.1 Error Codes

Part

Code

Error

Number

Error Message Recommended Action Severity

Level

Failure

Level

0001 1000 An error occurred. If this problem persists, please call

the Support Center.