Hitachi 42PD8800TA(PW3) Bedienungsanleitung

SPECIFICATIONS AND PARTS ARE SUBJECT TO CHANGE FOR IMPROVEMENT.

Plasma Display

November 2005 Digital Media Division

YK No.020E

SERVICE MANUAL 42PD8800TA(PW3)

32LD8800TA(PW3L)

Be sure to read this manual before servicing. To assure safety from ﬁre, electric shock, injury, harmful radia-

tion and materials, various measures are provided in this HITACHI display.

Be sure to read cautionary items described in the manual to maintain safety before servicing.

Caution

1. Features --------------------------------------------------3

2. Speciﬁcations--------------------------------------------4

3. Service point ---------------------------------------------5

4. Component names -------------------------------------6

5. New adoption technology-----------------------------7

6. Adjustment --------------------------------------------- 11

7. Troubleshooting--------------------------------------- 38

8. Self-diagnosis function ------------------------------ 53

9. Basic circuit diagram--------------------------------- 55

10.Printed wiring board diagram ---------------------- 82

11.Block diagram ----------------------------------------- 90

12.Connection diagram --------------------------------- 91

13.Wiring diagram ---------------------------------------- 93

14.Disassembly diagram-------------------------------- 97

15.Replacement parts list----------------------------- 101

Contents

1. Since Panel Module and front Filter are made of glass, handling the broken Module and Filter shall be

taken care sufﬁciently in order not to be injured.

2. Replacing work shall be started after the Panel Module and the AC/DC Power supply become sufﬁciently

cool.

3. Special care shall be taken to the display area in order not to damage its surface.

4. The Panel Module shall not be touched with bare hand to protect its surface from stains.

5. It is recommended to use clean soft gloves during the replacing work in order to protect not only the dis-

play area of the Panel Module but also a serviceman himself.

6. The Chip Tube of Panel Module (located upper left of the back and surrounded by frame) and ﬂexible

cables connecting Panel glasses to drive circuit PWBs are very weak, so shall be taken care sufﬁciently

not to break. If you break Chip Tube, the Panel doesn’t display anything forever.

Service Warning

LCD PDP

42PD8800/32LD8800

CAUTION FOR SAFETY

Please read this page before repair the monitor.

This page explains to following items for keep the safety of set and prevent to accident during

repair work.

We explain by symbol at happen the damage or injury when took wrong repair.

Warning This symbol means "possible to die or heavy damage"

Caution This symbol means "possible to damage or something will break"

We made the symbol as below, which are kind of following items.

This symbol means "CAUTION"

This symbol means "POSSIBLE to

ELECTRIC SHOCK"

This symbol means "MUST"

This symbol means "DO NOT"

Should be follows to instructions.

We indicates to cabinet, chassis and parts

by label, which are special attention part.

Please follow to note and [Safety Instructions]

of User’s Manual.

Prevent the electric shock.

Please take care during working because

monitor has high voltage part and power

supply part.

Possible to die if you tough to these place

by miss take.

Please disconnect power plug during

overhaul, reassemble or change parts.

You will die or take damage by electric

shock if you touch to live part.

Use recommended components.

Please use to same characteristic compo-

nent, which is same as previous for your

safety and keep reliability especially marked

by in parts list and circuit diagram.

It is reason of electric shock or fire if you

use non-recommended component.

Should be kept same style of wiring or component.

Monitor uses tubes or tapes, which made

by insulator, and some components are

keep distance from surface of PWB for

safety.

Internal leads kept from hot part or high voltage

part by clamper or styling, so please return to

original condition for prevent to electric shock

or fire.

Should be done safety check after finished.

Every part (removed screws, component

and wiring) should be returned to previous

condition.

Check around repair position for make

damage by miss take and measure the

insulated impedance by meg-ohm meter.

Confirm the value of impedance, that

value is more than 4M ohm.

It is reason for electric shock or fire if that

value is less than 4M ohm.

Nobody can check and repair to the code

and combination circuit of HDCP.

Never remove the shield case, which is

assembled to the code and combination

circuit of HDCP.

WARNING

42PD8800/32LD8800

PRECAUTIONS

How to clean the plasma screen panel of the monitor

Before cleaning the monitor, turn off the monitor and disconnect the power plug from the power outlet.

To prevent scratching or damaging the plasma screen face, do not knock or rub the surface with sharp or hard

objects. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. If it is not

enough, then use a cloth with mild detergent. Do not use harsh or abrasive cleaners.

How to clean the cabinet of the monitor

Use a soft cloth to clean the cabinet and control panel of the monitor. When excessively soiled dilute a neutral

detergent in water, wet and wring out the soft cloth and afterward wipe with a dry soft cloth.

Never use acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax,

glass cleaner, etc. especially because they would cause discoloration, scratches or cracks.

1. Features

Large-screen, high-definition plasma display panel

The 42-inch color plasma display panel, with a resolution of 1024 (H) x 1024 (V) pixels, and the 32-inch color LCD

panel with a resolution of 1366(H) x 768(V) pixels, creates a high-definition, large-screen(aspect ratio : 16:9) and low-

profile flat display. Free from electromagnetic interferences from geomagnetic sources and ambient power lines, the

panel produces high-quality display images free from color misconvergence and display distortion.

High Performance Digital Processor

A wide range of input signals can be handed,including composite, component,and HDMI.High Definition Digital Pro-

cessor creates the fine-textured image with dynamic contrast. In addition, it corresponds to a broad array of per-

sonal computer signals, from 640 x 400 and 640 x 480 VGA to 1600 x 1200 UXGA.(RGB Input)

Easy-to-use remote control and on screen display system

The remote control included eases the work of setting display controls. Further, the on-screen display system,

displays the status of signal reception and display control settings in an easy-to-view fashion.

Power saving system

The power saver feature saves power consumption automatically when input signals are not available.

When connected to a VESA DPMS-compliant PC, the monitor cuts its power consumption while it is idle.

Connecting to an Audio Visual Device

• Two composite/S terminal*1,three composite terminal*2, two component terminal*2, two HDMI terminal and

a photo input terminal have been added. A composite video output terminal is also provided as a

monitoring output.

*1 One composite/S terminal are on the side input. Composite terminal and S terminal should not be con-

nected at the same time

*2 Two composite terminal and two component terminal cannot be used at the same time.

• A wide range of devices other than personal computers can also be connected.

Power Swivel Feature

It allows to turn the display left or right within ± 30 degree using the remote control.

42PD8800/32LD8800

2. Specifications

Applicable video signals for each input terminal

Terminal RCA D-sub

Signal CVBS S-video Component RGB RGB

AV1,2

AV3

AV4

AV5*

HDMI1,2

( :Available)

HDMI

RGB

Note : CVBS and S-video on AV5 should not be connected

at the same time to prevent interference on the picture

Panel Display dimensions Approx. 32 inches

(698(H) x 392(V)mm, diagonal 801mm)

Approx. 42 inches

(922(H) x 522(V)mm, diagonal 1059mm)

Resolution 1366(H) x 768(V) pixels 1024(H) x 1024(V) pixels

Net dimensions

including Stand :

813(W) x 663(H) x 350(D)mm

excluding Stand :

813(W) x 584(H) x 114(D)mm

including Opional Stand :

1134(W) x 728(H) x 350(D)mm

excluding Optional Stand :

1134(W) x 648(H) x 98(D)mm

Net weight including Stand : 27.6kg

excluding Stand : 21.9kg

including Opional Stand : 43.0kg

excluding Opional Stand : 37.3kg

Ambient

conditions

Temperature Operating : 5°C to 35°C, Storage : 0°C to 40°C

Relative humidity Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)

Power supply AC100 - 240V, 50/60Hz

Power consumption / at standby 150W / <1W(100 - 220V)

150W / <1.1W(230 - 240V) 370W / <3W

Audio output speaker total 20W speaker total 36W

(VIDEO input)

Input terminals

AV1•2 : composite video input terminal (RCA) or component video input terminal (RCA)

L/R audio input terminal (RCA)

AV3•5 : composite video input terminal (RCA) or S video input terminal.

L/R audio input terminal (RCA)

AV4 : composite video input terminal (RCA)

L/R audio input terminal(RCA)

HDMI1•2 : HDMI input terminal

Audio input terminal (3.5mm Stereo Mini Jack)

Photo Input : Photo Input terminal / SD card slot

Input signals Composite video : PAL, SECAM, NTSC3.58, NTSC4.43, PAL60

Component video : 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60

Output Signal

OUTPUT (MONITOR) : composite video monitor-output terminal (RCA)

OUTPUT (MONITOR) : L/R audio monitor-output terminal (RCA)

OUTPUT (HEADPHONE) : L/R audio monitor-output terminal (Mini-pin)

OUTPUT (SUB-WOOFER) : Woofer output terminal

(RF input)

Input terminals ANT : 75Ω Unbalanced

RF Video System

PAL B, G, H / I / D, K

SECAM B, G / D, K / K1

NTSC-M

(RGB input)

Input terminals Analog RGB input terminal (D-sub 15-pin)

Audio unput terminal (3.5mm Stereo Mini Jack)

Input signals 0.7V/1.0Vp-p, analog RGB (Recommended Signal)

Sync signals

H/V separate, TTL level [2KΩ]

H/V composite, TTL level [2KΩ]

Sync on green, 0.3Vp-p [75Ω]

•The monitor takes at least 30 minutes to attain the status of optimal picture quality.

42PD8800/32LD8800

3. Service points

Lead free solder

This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions

before attempting any soldering work.

Caution: Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free

solder can splatter at high temperatures (600˚C).

Lead free solder indicator

Printed circuit boards using lead free solder are engraved with an "F."

Properties of lead free solder

The melting point of lead free solder is 40-50˚C higher than leaded solder.

Servicing solder

Solder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended.

Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not taking

these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.)

Precautions when using leaded solder

Remove all lead free solder from soldered joints when replacing components.

If leaded solder should be added to existing lead free joints, mix in the leaded solder thoroughly after the lead

free solder has been completely melted (do not apply the soldering iron without solder).

Servicing soldering iron

A soldering iron with a temperature setting capability (temperature control function) is recommended.

The melting point of lead free solder is higher than leaded solder. Use a soldering iron that maintains a high

stable temperature (large heat capacity), and that allows temperature adjustment according to the part being

serviced, to avoid poor servicing performance.

Recommended soldering iron:

Soldering iron with temperature control function (temperature range: 320-450˚C)

Recommended temperature range per part:

Part Soldering iron temperature

Mounting (chips) on mounted PCB 320˚C±30˚C

Mounting (chips) on empty PCB 380˚C±30˚C

Chassis, metallic shield, etc. 420˚C±30˚C

SUBPOWER PWB (Subpower PWB, Filter PWB, Terminal PWB)

SOUND PWB (Audio PWB, Control PWB, SW PWB)

FC PWB

MAIN PWB (Main PWB, LED PDP PWB, LED LCD PWB, Swivel PWB)

The PWB assembly which has used lead free solder

Readjustment Power supply voltage (PDP only)

When a PANEL or a Power Unit is exchanged, power supply voltage needs to be adjusted. Please adjust to

make the values of Va and Vs of as should on the label currently stuck on the panel back upper parts.Adjust-

ment is performed by VR in the power supply unit. Please refer to the procedures of “Va” and “Vs” adjustments

on 22page.

42PD8800/32LD8800

4. Component names

[Main unit]

Control panel

(32")

• The main power switch is located on the lower surface.

Main power switch

(42")

Remote Control

Receiver

Indicating Lamp

SD Memory Card Slot

Sub Power button

Channel UP/▲button

Channel DOWN/▼button

Volume UP /►button

Volume DOWN /◄button

Input Select /OK button

Menu / Return button

SD MEMORY

CARD

PUSH-EJECT

PH35814

POWER button

INPUT SELECT buttons

MENU button

OK button

SOUND MODE button

VOLUME UP/DOWN button

PROGRAM SELECT buttons

(TV)

FREEZE/MULTI MODE button

RECALL button

FUNCTION SELECT button

DVD CONTROL buttons

RETURN button

SELECT/ADJUST button

PICTURE MODE button

CH I/CH II button (TV)

CHANNEL UP/DOWN button (TV)

MUTE button

MULTI PICTURE button

PHOTO INPUT buttons

SWIVEL button

T/TEXT button

(TV)

CLE-970

[Remote control]

42PD8800/32LD8800

5. New adoption technology

[System control micom I001(M30627)]

Pin function table

No. PIN NAME I/O Panel: PDP/ LCD FUNCTION

1VREF (+5.0V) I PDP/ LCD 5V

2+5.0V I PDP/ LCD 5V

3AUDIO_SW1 I/O PDP/ LCD Audio SW1

4OSD_DATA I/O PDP/ LCD OSD DATA

5OSD_CLK I/O PDP/ LCD OSD CLK

6HP_VOL I/O PDP/ LCD Head Phone Volume

7FUNC_1 I/O PDP/ LCD Function1

8 DATA_OUT(FC) I/O PDP/ LCD FC MicroComputer 3 Lines Bus Data Out /Media Data Out

9 DATA_IN(FC) I/O PDP/ LCD FC MicroComputer 3 Lines Bus Data In/ Media Data In

10 CLK(FC) I/O PDP/ LCD FC MicroComputer 3 Lines Bus Clock/ Media Clock

11 BL_INST I/O PDP/ LCD Black Insert On/Off for 32V LCD (37V=Low)

12 BL_BLINK I/O PDP/ LCD Backlight Blink On/Off for 32V LCD (37V=Low)

13 GND I PDP/ LCD GND

14 CNVSS(FLASH) I PDP/ LCD CNVSS(FLASH)

15 DSUB COMP I/O PDP/ LCD Sync Switching

16 RGBSW I/O PDP/ LCD Sync Switching

17 RESET I PDP/ LCD Reset

18 16MHz Oscillation O PDP/ LCD OSC-OUT

19 GND I PDP/ LCD GND

20 16MHz Oscillation I PDP/ LCD OSC-IN

21 +5.0V I PDP/ LCD 5V

22 NMI(+5.0V) I PDP/ LCD 5V PULL UP

23 RMCON I/O PDP/ LCD Receiving Remote Control Signal

24 NC I/O PDP/ LCD NC

25 V.FREQ_3 I/O PDP/ LCD V.Frequency

26 SCV.SYNC I/O PDP/ LCD SUB_Y.SYNC (Composite䋩

27 IRQ䋨PM-IRQ) I/O PDP/ LCD PDP Control

28 MCV.SYNC I/O PDP/ LCD MAIN_Y.SYNC (Composite䋩

29 POWER_LED I/O PDP/ LCD L䋺Lighting (Power Save)

30 FUNC_2 I/O PDP/ LCD Function2

31 CEC_OUT I/O PDP/ LCD CEC OUT(CEC1)

32 H.FREQ_3 I/O PDP/ LCD H.Frequency

33 PDWN I/O PDP/ LCD Panel LVDS

34 RXD2 I/O PDP/ LCD RS-232C Communication

35 TXD2 I/O PDP/ LCD RS-232C Communication

36 TXD1(RS232C/FLASH) I/O PDP/ LCD FLASH for Writing

37 I PDP/ LCD 5V

38 RXD1(RS232C/FLASH) I/O PDP/ LCD FLASH for Writing

39 I PDP/ LCD GND

40 SCLK(FLASH) I/O PDP/ LCD FLASH for Writing

41 BUSY(FLASH) I/O PDP/ LCD FLASH for Writing

42 TXD0(DTT) I/O PDP/ LCD DTT

43 RXD0(DTT) I/O PDP/ LCD DTT

44 SDA4(panel) I/O PDP/ LCD PDP Communication䋨I2C Bus䋩

45 SCL4(panel) I/O PDP/ LCD PDP Communication䋨I2C Bus䋩

46 M_ENABLE I/O PDP/ LCD Media Enable

47 M_SCLK I/O PDP/ LCD Media Clock

48 M_SDA I/O PDP/ LCD Media Data

49 M_WAKEUP I/O PDP/ LCD Media Wakeup

50 PDPGO(PM_ON) I/O PDP/ LCD PDP Control/LCD Panel 12V/WVGA Power

42PD8800/32LD8800

No. PIN NAME I/O Panel: PDP/ LCD FUNCTION

51 CPUGO(PM_CPU) I/O PDP/ LCD PDP Control/Inverter Voltage

52 EPM (FLASH) I/O PDP/ LCD FLASH for Writing

53 VIDEO.DET_1 I/O PDP/ LCD VIDEO Board Detection

54 SCL1 I/O PDP/ LCD I2C䋨To the Side of Main Board䋩FE/MSP3455or MSP3415G/SAA5361

55 SDA1 I/O PDP/ LCD I2C䋨To the Side of Main Board䋩FE/MSP3455or MSP3415G/SAA5361

56 HDMI-RESET I/O PDP/ LCD HDMI-Reset

57 HDMI-HPD_RESET I/O PDP/ LCD Hot Plug Detect Reset

58 SEL_0 I/O PDP/ LCD FC Clock/Others SW

59 SEL_1 I/O PDP/ LCD HDMI/DTT SW

60 TUNER.DET_1 I/O PDP/ LCD TUNER Detection

61 CE (FLASH) I/O PDP/ LCD FLASH for Writing

62 STAND.CIR_DET I/O PDP/ LCD Stand Detection

63 SW_L_OUT I/O PDP/ LCD Swivel L Output

64 SW_R_OUT I/O PDP/ LCD Swivel R Output

65 M_SW I/O PDP/ LCD Bridge Media Circuit Connection Judgement Terminal

66 INITIALIZE I/O PDP/ LCD Memory Initial

67 BR_MUTE I/O PDP/ LCD Bridge Media Audio Mute

68 CK_SEL I/O PDP/ LCD Clock Selector

69 SCDT I/O PDP/ LCD HDMI Power Save for Return

70 CK_INV I/O PDP/ LCD Clock Invert

71 DVI-SW I/O PDP/ LCD DVI Control

72 CUR_PRTCT I/O PDP/ LCD Power Swivel Overcurrent Detection

73 SP_MUTE I/O PDP/ LCD SP Relay

74 AUDIO_MUTE I/O PDP/ LCD Audio MUTE

75 ASEL1 I/O PDP/ LCD Audio Switching SW

76 ASEL2 I/O PDP/ LCD Audio Switching SW

77 SDA2 I/O PDP/ LCD I2C(TAS3103/TAS5508)

78 SCL2 I/O PDP/ LCD I2C(TAS3103/TAS5508)

79 D-SUB I/O PDP/ LCD D-SUB COMP for Sync Switching

80 BM_SW I/O BM Switching

81 RGB_BLK_2 I/O NC

82 RGB_BLK_3 I/O NC

83 AUDIO_RESET I/O Audio Circuit Reset

84 PDP_WVGA_LCD_SW_ I/O PDP/42WVGA/LCD Detection

85 +5.0V I

86 EDID_PROTECT_1 I/O PDP/ LCD Memory Protect(Not necessary if power is available to use䋩

87 GND I PDP/ LCD GND

88 WSS_1 I/O PDP/ LCD NC

89 WSS_2 I/O PDP/ LCD NC

90 WSS_3 I/O PDP/ LCD NC

91 TV.AFC(M) I/O PDP/ LCD Main Tuner Control (AFC)

92 TV.AFC(S) I/O PDP/ LCD Sub Tuner Control (AFC)

93 AUDIO_SW2 I/O PDP/ LCD Audio SW2

94 EDID_PROTECT_2 I/O PDP/ LCD Memory Protect(Not necessary if power is available to use䋩

95 HP_DETECT I/O PDP/ LCD HEAD PHONE DETECT

96 PDP_WVGA_LCD_SW_ I/O PDP/ LCD PDP/42WVGA/LCDᬌ಴

97 INT_HDMI I/O PDP/ LCD INT(HDMI)

98 CEC_IN I/O PDP/ LCD CEC IN(CEC2)

99 COMP_SW I/O PDP/ LCD Component SW Main 㹤DSUB

100 DEMP_OUT I/O PDP/ LCD De-emphasis Control Output for HDMI

42PD8800/32LD8800

No. PIN NAME I/O Panel: PDP/ LCD FUNCTION

101 NC I/O LCD NC

102 SCL0 I/O PDP/ LCD I2C䋨To the Side of Main Board䋩(TA1391FG/CXA2069/uPD64015/TB1274AF)

103 SDA0 I/O PDP/ LCD I2C䋨To the Side of Main Board䋩(TA1391FG/CXA2069/uPD64015/TB1274AF)

104 SCL3(EEPROM) I/O PDP/ LCD I2C䋨EEPROM䋩

105 SDA3(EEPROM) I/O PDP/ LCD I2C䋨EEPROM䋩

106 EPGGO I/O PDP/ LCD EPGGO

107 EXT_RESET I/O PDP/ LCD EXTERNAL RESET

108 OSD_CS I/O PDP/ LCD OSD CS

109 FC_ENABLE I/O PDP/ LCD FC MicroComputer 3 Lines Enable

110 V_P_DET_1 I/O PDP/ LCD V_DET_1(Power Save Return䋩

111 V_P_DET_2 I/O PDP/ LCD V_DET_2(Power Save Return䋩

112 IRQ_DTT I/O PDP/ LCD DTT IRQ

113 DTT_POWER I/O PDP/ LCD DTT POWER

114 DISPEN I/O PDP/ LCD DISPEN/Backlight on

115 HDMI_A_SW I/O PDP/ LCD HDMI AUDIO SW

116 SCL5 I/O PDP/ LCD I2C䋨Sil9021䋩

117 SDA5 I/O PDP/ LCD I2C䋨Sil9021䋩

118 SCL6 I/O PDP/ LCD I2C䋨To the Side of Sensor Board䋩(AD7414䋩

119 SDA6 I/O PDP/ LCD I2C䋨To the Side of Sensor Board䋩(AD7414䋩

120 COLOR_SYS I/O PDP/ LCD Color System (Pull-in range Switching䋩

121 AD_KEY3 I/O PDP/ LCD AD KEY3**

122 AD_KEY2 I/O PDP/ LCD AD KEY2*

123 AD_KEY1 I/O PDP/ LCD AD KEY1(Power)

124 TV.POWER I/O PDP/ LCD H:PowerON䇮L:(Standby,PowerSave)

125 DIP.DET I/O PDP/ LCD DIP DET

126 POWER_SAVE I/O PDP/ LCD L䋺Lighting(Standby䍂PowerSave), H䋺Lights-out

127 GND I PDP/ LCD GND

128 FAN_ALARM *1 I/O PDP/ LCD FAN ALARM

42PD8800/32LD8800

MAIN µ-COMPUTE

(M3062

)

HP_VOL DA1 P54 VIDEO.DET_1

DSUB COMP P87 P53 SEL_2

RGB SW P86 P52 SEL_1

POWER_SAVE P101 P51 TUNER.DET

POWER_LED P76

M_SCK P136 P127 STAND.CIR_DE

TV.POWER P103 P126 SW_L_OUT

BR_MUTE P45 P125 SW_L_OUT

CK_SEL P44 P46 INITIALIZ

EEPROM

SCDT

P43

AUDIO

(CAT24WC64)

CK_IN

P42 P47 M_SW

DVI-SW P41 P07 SCL3

BL_BLIN

P140 P06 SDA3

EDID

PROTECT

P30

P04

EXT

RESET

䇼

A0/A1h

䇽

UD RST P121 P115 DISPEN

CUR_PRTC

P40 P32

SP_MUTE P37 P33

UDIO_MUTE P36 P133

SEL1 P35 P132

SEL2 P34 P11

PDWN P72 P10 TEMPERATURE

V_P_DET_1 P01 VIDEO DECODER SENSOR (0ption

)

TUNER (FE Main)

UDIO PROCESSO

IRQ(PM

IRQ)

P80

PDP

WVGA

LCD

SW1

(TB12

(AD

414

䋩

(ENG39616G

*1/V0

A31FTV *2/ENG29

**G *3)

(TAS3103)

DA0 P120 PDP_WVGA_LCD_SW2 SCL0 P111 SCL6 SCL1 SCL2

M_SD

P135 SDA0 P110 SDA6 SDA1 SDA2

PDPGO(PM_ON) P57 P131 HDMI_RESE

*3䇼84/85h䇽

CPUGO(PM

CPU)

P130

HDMI

HPD

RESET

䇼

8E/8Fh

䇽

䇼

3Ah

䇽

䇼

C0h

䇽

䇼

6Ah

䇽

RMCON(AVC

)

P84

CEC_OU

TA2OUT FC SUB µ-com AV S

SOUND MULTIPLE

UDIO PROCESSO

FREQ

INT0

(H8S

2239 )

(CXA2069Q)

(MSP341

䋯

MSP34

G *4)

(TAS

䋩

V_P_DET_2 P00 CLK3 CLOCK SCL0 S-1 SCL1 SCL2

SCV.SYNC TA4IN SOUT3 DATA IN SDA0 S-2 S_DET_AV3 SDA1 SDA2

MCV.SYNC TA3IN SIN3 DATA OUT S-3 COMP_DET_AV2 RESET MSP_RESET

KEY3

AN6

P02

ENABLE

COMP

DET

AV1

䇼

80/81h

䇽

䇼

36h

䇽

D_KEY2

N27 WSS_1 S2-2

UDIO_SW2 P22

N26 WSS_2 OSD CONTROLER S2-3 FE Sub

EDID

PROTECT

P21

AN2

WSS

(OSDCM201 )

(ENG39616G)

TV.AFC(S)

N23 CLK4 SCLK S2-4 SCL1

AFC(M)

AN24

SOUT4

SIN

䇼

90/91h

䇽

SDA1

D_KEY1

N4 P03 CS

RESET

Y/C

䇼

C6h

䇽

HDMI

P114

P13

ENABLE

(

PD6401

)

H.FREQ_3 TA1IN M_SCLK SCL0

FUNCTION_

P75 M_SD

SDA0 TELETEXT TV.SEL_3

FAN

ALARM

P100

P134

WAKEUP

(SAA

361

䋩

SEL

WVGA PANEL

SCL6

P111

P124

䇼

B8h

䇽

SCL1

SEL

FUNC

P110

P123

RGB

BLK

SDA1

SEL

SCL4

BL_INST P141 P122 RGB_BLK_3 SYNC SEPARATION FE.SW_1 SDA4 SDA4

DIP

DET

P102

(TA1391FG)

䇼

60/61h

䇽

DTT

TXD0

RXD2

RS232C

SCL0

AGC

䇼

30/31h

䇽

DTT RXD0 TXD2 RS232C SDA0 Text Ys_SW

D-SUB P31 S_Trap

DETECT

AN20

P60

䇼

D8/D9h

䇽

DTT_POWER P116 P61 LCD PANE

IRQ

DTT

P11

P113

HDMI

P12

P112

(Sil9021)

SCL4

DEMP_OU

P13 P65 SCLK(FLASH) SCL5 DA

SDA4

COMP

P14

P64

BUSY(FLASH)

SDA

M62342G

TXD1

FLASH

TXD

SCL4

INT (HDMI)

P16

RXD1

FLASH

RXD

䇼

68/69h

䇽

SDA4

CEC_IN P15 CNVss CE EPM CNVss P56

EPGGO

orma

COLOR_SYS P107 P55 EPM Flash Writing 5V 0V 5V

WVGA

32LCD

37LCD11

PANEL TYPE

PDP

䌐120 P17

Buffer

Level

PDP

Block diagram

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hitachi Fernseher Handbücher

Hitachi

Hitachi 55VH Bedienungsanleitung

Hitachi

Hitachi 32HXT16U Bedienungsanleitung

Hitachi

Hitachi 32LD9800TA Bedienungsanleitung

Hitachi

Hitachi 32HE1500 Bedienungsanleitung

Hitachi

Hitachi 42PD9700C Bedienungsanleitung

Hitachi

Hitachi LC57 Bedienungsanleitung

Hitachi

Hitachi 36FX48B/CZ85 Bedienungsanleitung

Hitachi

Hitachi 46F500A Bedienungsanleitung

Hitachi

Hitachi C2564TN Bedienungsanleitung

Hitachi

Hitachi 58HK6200U Bedienungsanleitung

Hitachi

Hitachi 57S715 Bedienungsanleitung

Hitachi

Hitachi 22HYC06U Bedienungsanleitung

Hitachi

Hitachi 43HAK6150U H Bedienungsanleitung

Hitachi

Hitachi 42HDF52 - 42" Plasma TV Bedienungsanleitung

Hitachi

Hitachi C1411R Bedienungsanleitung

Hitachi

Hitachi C2144S Bedienungsanleitung

Hitachi

Hitachi 24HBJ55U Bedienungsanleitung

Hitachi

Hitachi LE55S606 Bedienungsanleitung

Hitachi

Hitachi C1422T Bedienungsanleitung

Hitachi

Hitachi L32R100 Bedienungsanleitung

Hitachi

Hitachi C1421R Bedienungsanleitung

Hitachi

Hitachi C2868TN Bedienungsanleitung

Hitachi

Hitachi C50M6 Bedienungsanleitung

Hitachi

Hitachi ULTRAVISION C58M6 Bedienungsanleitung

Beliebte Fernseher Handbücher anderer Marken

Toshiba

Toshiba 27A10 Bedienungsanleitung

Philips

Philips 42PF9630A/37 Bedienungsanleitung

DAEWOO ELECTRONICS

DAEWOO ELECTRONICS DTQ-14V1FC Bedienungsanleitung

Changhong Electric

Changhong Electric uhd55b6000is Bedienungsanleitung

Philips

Philips Matchline 21CE7551 Bedienungsanleitung

Panasonic

Panasonic Genus TX-G10 Bedienungsanleitung

Toshiba

Toshiba 19A20 Bedienungsanleitung

Philips

Philips 25PT4523-16 Bedienungsanleitung

Sony

Sony XBR-100Z9D Bedienungsanleitung

Philips

Philips PR0930X3 Bedienungsanleitung

Philips

Philips Brilliance 231P4QPY Bedienungsanleitung

Samsung

Samsung 55S9 B Series Bedienungsanleitung

Philips

Philips 32HF9385D Fehlerbehebungshandbuch

Philips

Philips Colour Television Bedienungsanleitung

Sharp

Sharp LC-40FI5012E Bedienungsanleitung

Loewe

Loewe Table Stand Reference 55 Bedienungsanleitung

Philips

Philips 32PFH5300 Bedienungsanleitung

Sylvania

Sylvania 6427FB Bedienungsanleitung