Hitech HT884/8 Bedienungsanleitung
HT884/8 VTR/DDR Controller
HT884c/8c Cue Controller
HT884s/8s Slo Mo Controller
Users Manual
HT800 Series VTR/DDR
Controller
Software version:
Document file:
3.42
HT800 manual Version 3.21
History
Date
Description
Version
Nov 12
Hardware panel updated
3.42
Nov 10
Wheel Switch modification
3.30
Jan 08
GPI functions added
3.20
Sept 07
Update cueing functions
3.10
July 06
New functions added
3.00
HT800 Series VTR and Disk controllers
2010 Hi Tech Systems Limited
Feb 06
Update manual with smart wheel
2.3
Hi Tech Systems Ltd
Holbrook House
Oakley Lane
Oakley
Basingstoke
Hampshire RG23 7JY
U.K.
Tel:
Fax:
Email:
Web:
+44 (0) 1256 780880
+44 (0) 1256 782600
support@hitechsys.com
www.hitechsys.com
The hardware/software and manual are copyright 1998 - 2012
by Hi Tech Systems Ltd. All rights reserved. The operating code
is licensed by Hi Tech to the original purchaser only. It is not
permitted to copy, sell or use this product in any other way than
is intended.
All trademarks acknowledged.
According to the U.K. copyright law, unauthorised reproduction
of software can be subject to civil damages.
The information in this document is subject to change without
notice.
In no event will Hi Tech Systems Ltd be liable for direct,
indirect, incidental or consequential damages resulting from any
defect in the software even if they have been advised of such
damages.
HT800 Series VTR and Disk controllers
2010 Hi Tech Systems Limited
C
Co
on
nt
te
en
nt
ts
s
1INTRODUCTION 1
2INSTALLATION 4
Unpacking 4
Desk mounting 4
Warnings –read before installation or use 5
2.1 EXTERNAL CONNECTIONS 6
Power requirements 6
Connecting controlled devices 8
Controller Configurations 8
RJ45 connector pin out 9
Installing the GPI I/O option 10
GPI interface pinout 10
Using GPIs 11
Using the on-air tally 12
Using additional controllers 12
3OPERATION 15
3.1 USING THE MAIN CONTROLLER KEYS 16
Device selection 16
Selecting multiple devices 17
Assigning an external controller 17
Menu, PB and Timecode settings 18
MENU 18
PP/EE 18
T/C 18
Using CUEs 19
Entering cues MARK IN/OUT Keys 19
Cues functions on the HT884/8c 20
Cues functions on the HT884/8s and HT884/8 21
Looping Cues 21
Cue memory location table 21
Deleting single cues 22
Selecting timecode source data 22
Setting TCG and CTL 23
3.2 EDITING 24
HT800 Series VTR and Disk controllers
2010 Hi Tech Systems Limited
Edit delay 25
Start delay 25
Marking in and out points 25
Editing functions on the HT884/8c 27
Editing functions on the HT884/8s and HT884/8 27
Making a single machine edit 27
Making a two machine edit 28
More than one recorder 29
3.3 SLOW MOTION CONTROLLER-USING THE T-BAR 30
Keypad 30
ESC key 31
Var 31
Still 31
Goto TC 31
Goto Cue No 31
T-Bar shuttle key 32
Pre-set variable key 32
DDR mode (simultaneous play/record) 32
Select disk mode 32
Start Recording 33
Live / Playback mode or EE routing 33
Live Jog 33
3.4 CUE CONTROLLER 34
Keypad 34
ESC key 35
Goto TC 35
Goto Cue No 35
DELETE 35
4USING THE MENU SYSTEM 36
Navigating the menu 36
5TOUBLE SHOOTING 45
6ADDENDUM 47
6.1 SUMMARY OF FUNCTIONS 47
6.2 OUTLINE DIMENSIONS 50
6.3 DISASSEMBLY 52
Removing the main PCB 52
Replacing the PCB 53
HT800 Series VTR and Disk controllers
2010 Hi Tech Systems Limited
Software Updates 53
6.4 CABLE PIN OUT REFERENCE 54
Notes on PC serial connectors 55
7SPECIFICATION 58
Introduction
2010 Hi Tech Systems Limited 1
1
1
I
In
nt
tr
ro
od
du
uc
ct
ti
io
on
n
The Hi Tech HT800 series of VTR and DDR controllers
provide a user-friendly remote control interface for
professional and broadcast videotape and disk
recorders.
The controllers now utilise a control wheel, called
“smartwheel”that is our first implementation of
Haptic technology –“Haptic” is Greek for the science
of touch. Our controller can be programmed to give
the operator different tactile and kinesthetic
sensations depending on the mode of operation, such
as jog, indented incremental shuttle speeds and so
on.
There are three basic models, a standard desktop
model with a crafted shuttle/jog control, an enhanced
model which adds a direct entry keypad and a deluxe
Slo-Motion Controller that adds a key pad and a T-
Bar control arm.
HT800 series VTR and DDR Controllers
HT884/8
HT884/8c
HT884/8s
Introduction
2 HT800 Series VTR and Disk controller
All of the three models are available as four-machine
and eight-machine versions.
This manual covers the following models:
HT884/8
4 and 8 Machine VTR and DDR Remote
Controller
HT884s/8s
4 and 8 Machine Slo-Motion Controller with key
pad for direct entry of T/C data and T-Bar
HT884c/8c
See the separate HT800c getting started guide
for a description of the cueing functions
Controls all devices conforming to the Sony
RS422 ‘P2’ protocol
Custom jog/shuttle wheel utilising control that is
our first implementation of “Haptic” technology.
High visibility vacuum fluorescent display
On-Air indicator
Optional direct entry key-pad and Slo-Mo T-Bar
Optional GPI interface with 4 programmable
trigger inputs and outputs
Set tape timer, timecode generator and timecode
display
Dedicated timecode select of VITC, LTC, CTL and
Auto plus EE/PB switching
Multiple cues with Mark-In and Out points
2 machine insert and assemble editing
Gang control of any combination of VTRs
Programmable cueing modes (cue to still, cue
and play)
Main
features
Introduction
2012 Hi Tech Systems Limited 3
Programmable device labels
Selectable RS422 ‘loop through’ connector
Variable jog and shuttle sensitivity for different
VTRs/DDRs
Controls any DDR supporting Sony VTR emulation
Internal bleeper to alert warnings (off line,
cassette out etc)
Accessories supplied:
4 or 8 RJ45 to 9 pin ‘D’ type adaptors
(HT8821/m)
User’s manual (this manual) on CD
Available options:
Spare RJ45 to 9 pin ‘D’ type adaptor male for
direct connection to VTR
Spare RJ45 to 9 pin ‘D’ type adaptor female for
connection to end of "standard" RS422 cable
GPI interface: 4 GPI inputs/GPI outputs
Technical manual
Flight case for HT800s series
Note:
In this manual HT800 Series VTR and DDR controllers
are referred to as ‘controller’. VTR, laser and disk
recorders are referred to as ‘VTR’.
Main
features
continued
s
Installation
4 HT800 Series VTR and Disk controller
2
2
I
In
ns
st
ta
al
ll
la
at
ti
io
on
n
The Hi Tech Series of VTR and DDR Controllers are
designed as desk-top units.
Unpacking
The Hi Tech Systems HT800 Series of VTR and DDR
controllers are shipped in a carton, which may
contain other optional items within the packing, and
care should be taken to ensure that these are not
thrown away. The contents of the carton are as
indicated on the delivery note. Carefully unpack and
check for shipping damage and shortages. Report
without delay, any damage or shortages to Hi Tech
Systems Ltd.
Desk mounting
The HT800 series of desk mounting controllers
require no special fixings, but can be mounted into a
desk as a ‘drop through’ unit.
Outline dimensions for all models are given in the
Addendum at the back of this manual.
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
