Hohem iSTEADY V2 Bedienungsanleitung
V1.1
01 02 03 04 05
06 07 08 09 10 11 12
Quick Start Guide
クイックスタートガイド
퀵�스타트�가이드
Kurzanleitung
Guida rapida
Guide de démarrage rapide
Guía de inicio rápido
Краткое руководство
01-12
13-25
26-38
39-51
52-64
65-77
78-90
91-103
01 02 03 04 05
06 07 08 09 10 11 12
Disclaimer and Warning
Thank you for purchasing the Hohem
product.By using this product, you hereby
signify that you have read this disclaimer and
warning carefully and that you understand
and agree to abide by the terms and
conditions herein. You agree that you are
solely responsible for your own conduct while
using this product, and for any consequences
thereof. You agree to use this product only for
purposes that are proper and in accordance
with all applicable laws, rules, and
regulations, and all terms, precautions,
practices, policies and guidelines Hohem has
made and may make available. Hohem
accepts no liability for damage, injury or any
legal responsibility incurred directly or
indirectly from the use of this product. The
user shall observe safe and lawful practices
including,but not limited to, those set forth in
this document.
Contents
Download the Hohem Pro App
iSteady V2 Overview
Mounting and Balancing
Activation & Bluetooth Connection
AI Visual Tracking & LED Video Light
Button Function
Working Mode & Follow Speed
How to fold the gimbal?
Use as emergency power bank
How to do if the gimbal is not level
after powering on?
Power indicator and Bluetooth
indicator function
Specifications
Warranty Card
01
02
03
04
05
06
07
09
09
09
10
11
11
01 02 03 04 05
06 07 08 09 10 11 12
Scan the QR code to enter the download page
Search " Hohem Pro " in the App Store or Google Play
*Hohem Pro app requires iOS 10.0 or above, Android 6.0 or above
*More product tutorials can be found on the app homepage
Download the Hohem Pro App,
Register and Login
When powering on iSteady V2 at first use, activation is required through
Hohem Pro app.
iSteady V2 works after the activation.
Mount your mobile phone before powering on iSteady V2.
If no mobile phone is detected or the motor is overloaded due to phone
is not level, the gimbal will shut down after a warning beeping.
Important Notes:
○
○
○
○
EN 01 02 03 04 05
06 07 08 09 10 11 12
iSteady V2 Overview
AI Vision Sensor &
LED Video Light Power Button
AI Vision Indicator
AI Vision Sensor
LED Video Light
Phone Clamp
Folding Lock A
Folding Lock B
Battery Indicator
Zoom Slider
Shutter Button
Tilt Motor
Knob
Pan Motor
Bluetooth Light
Joystick
Power (ON/OFF) /
Function Button
01.
02.
03.
04.
05.
06.
07.
08.
09.
10.
11.
12.
13.
14.
15.
16.
Roll Motor
Bidirectional charging
port (Type C)
Reset
Handle
（Battery built-in）
Lanyard Hole
1/4 inch Screw Port
17.
18.
19.
20.
21.
22.
01
02
03
05 11
12
06
07
08
09
10
13
14
15
16
17
20
19
18
22
21
04
01 EN 02 03 04 05
06 07 08 09 10 11 12
①
Unfold the
gimbal
②
Screw up the
knob
③
Turn the
“hohem”logo
upward
④
Put your phone
stuck in the
bottom of phone
clamp and pull
the head of
phone clamp to
mount your
phone.
⑤
Slide the phone
and make sure it
is clamped in the
middle, power on
the gimbal after
balancing the
phone clamp.
The gimbal would work improperly if not screw
the knob up.
Clench the phone clamp, ensuring that your
phone is cling to the rubber mat, otherwise the
gimbal would vibrate or turn off automatically.
How to mount and balance
mobile phone on the gimbal?
01 02 EN 03 04 05
06 07 08 09 10 11 12
For the first time, please turn on the gimbal. Log into the Hohem Pro app to activate the gimbal.
Gimbal will work improperly if not been activated.
① Startup
Long press the function button. At the first start, it will enter a
to-be-activated state and the Bluetooth indicator will flash
alternately in red and green.
② Bluetooth connection through the APP
Turn on the bluetooth of phone. Log into the app Hohem Pro.
Following the notice at the top for connection.
③ Activate iSteady V2
After the Bluetooth is connected, an activation prompt box will
pop up. Click "Confirm" to complete the activation. Three beeps
for noticing you the activation has done, and you can use the
gimbal now.
Booting up iSteady V2 at first use
Activation & Bluetooth Connection
01 02 03 EN 04 05
06 07 08 09 10 11 12
LED Video Light
Single press the power button to start, the indicator light shows red, and the LED video
light double flashes to indicate that the AI visual tracking has been activated (long press
the power button to turn off)
Please note: The best distance
of gesture control is between
0.5 and 1.5 meters (1.6-5 ft) ,
and make sure that both
gesture and face are shown in
front of AI senser within this
range.
AI Visual Tracking
AI Visual Tracking & LED Video Light
Portrait mode:
Thumbs-right
Switch between landscape and
portrait mode: Two hands facing
towards the AI vision sensor
Landscape mode:
Thumbs-up
Press AI vision sensor & LED video light power button to adjust the light intensity, LED
turns according to low-medium-high-close modes.
Start smart tracking: take
a OK gesture towards the
AI vision sensor, AI vision
indicator will turn green
Turn off smart tracking: show
a palm gesture towards the AI
vision sensor and AI vision
indicator will turn red
01 02 03 04 EN 05
06 07 08 09 10 11 12
Button Function
③ Zoom Slider
(Only available in the app)
Push Up: Zoom in
Push Down: Zoom out
④ Shutter Button (Ensure the Bluetooth is connected)
Single Press: Take photo, Start/End video
Double Press: Switch photo/video modes
Triple Press: Switch front/rear cameras (Only available
in the app)
② Joystick
Up/Down：Tilt Control
Left/Right：Pan Control
(It is able to control the roll motor
through Left/Right Joystick Settings
in Hohem Pro app)
① Power (ON/OFF) / Function Button
Long Press：Power On/Off
Single Press：Switch the landscape and portrait modes
Double Press: Recenter the gimbal
Triple Press: Inception (Auto rotation)
Press Five Times: Auto calibration
Press Seven Times: Remote control pairing
The bluetooth light will flash alternately in yellow and green.
(The remote control is an optional accessory)
a. If the remote control is not paired within 30 seconds, the pairing
will be cancelled;
b. Click the function button to cancel pairing;
c. Double-click the function button to clear the paired remote
control and cancel pairing;
(And the paired remote control will be unavailable and need to be
re-paired)
01 02 03 04 05
EN 06 07 08 09 10 11 12
Working Mode
Pan&Tilt Follow
This is the default working mode. When you rotate the handle left/right/tilt up/tilt down, the camera
will follow the handle movements, and the roll motor is locked without following the movement.
*For changing working mode or follow speed, please open Hohem Pro app - Start Recording - Gimbal
Parameter Settings
*Ensure the Bluetooth is connected and change the settings
Working Mode & Follow Speed
How to switch working modes by button?
Combination operation: Press and hold shutter button and tap power button
Single Tap: Pan&Tilt Follow (Default)
Double Tap: Pan Follow
Triple Tap: All Lock
Quartic Tap: POV (All Follow)
*Tips: To ensure proper operation, please release the shutter button after the power button.
01 02 03 04 05
06 EN 07 08 09 10 11 12
Andere Handbücher für iSTEADY V2
2
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Hohem Kamerazubehör Handbücher
Hohem
Hohem iSteady V2S Bedienungsanleitung
Hohem
Hohem iSteady M6 Kit Bedienungsanleitung
Hohem
Hohem ML-01 Bedienungsanleitung
Hohem
Hohem iSteady Pro 3 Bedienungsanleitung
Hohem
Hohem iSteady Pro 4 Bedienungsanleitung
Hohem
Hohem iSTEADY X Bedienungsanleitung
Hohem
Hohem iSTEADY X Bedienungsanleitung
Hohem
Hohem iSteady Mobile Bedienungsanleitung
Hohem
Hohem iSteady X2 Bedienungsanleitung
Hohem
Hohem iSteady MT2 Bedienungsanleitung
Hohem
Hohem HG5 PRO Bedienungsanleitung
Hohem
Hohem iSteady MT2 Bedienungsanleitung
Hohem
Hohem iSteady XE Bedienungsanleitung
Hohem
Hohem iSteady X2 Bedienungsanleitung
Hohem
Hohem DG1 Bedienungsanleitung
Hohem
Hohem iSteady Mobile+ Bedienungsanleitung
Hohem
Hohem iSteady Mobile Bedienungsanleitung
Hohem
Hohem iSTEADY X Bedienungsanleitung
Hohem
Hohem iSteady XE Bedienungsanleitung
Hohem
Hohem iSteady M6 Bedienungsanleitung
