Hollyland SOLIDCOM C1 Bedienungsanleitung

QuickGuide

V1.0.0

HOLLYLAND SOLIDCOM C1

Introduction

Thank you for purchasing

The SOLIDCOM C1 includes eight single-sided remote wireless headsets along with

eight rechargeable batteries, a charger, a HUB base with wired headset, and accessories.

It is a full-duplex wireless DECT intercom system engineered to provide clear audio and

all-day wearing comfort in a true-wireless design with no beltpack required. The system

operates in the 1.9GHz band/5GWIFI(5190MHz), providing a reliable transmission range up to 1000ft (350m

radius (LOS.

This Quick Guide will guide you through the installation and use of the equipment.

FULL-DUPLEX WIRELESS INTERCOM SYSTEM

SOLIDCOM C1 Headset Intercom Package

①HUB Base 1 x

②Remote Headset (with blue nameplate) 8 x

④ Charging Case 1 x

⑩High-gain Antennas 4 x

③ 3.5mm HUB Headset (with red nameplate) 1x

⑦ 12V/2A DC Adapter 2 x

⑨ USB Type-A to Type-C Cable 1 x

⑧Over-ear Cushion 9 x

⑪ Storage Case 1 x

⑫ Quick Guide 1 x

⑬ Warranty Card 1 x

Note: The amount of the items listed above depends on the edition.

 Battery 16 x

⑤

① ② ③

⑥⑦⑧

⑨

④

⑥Microphone Cushion 9 x

Packing List

Product Interfaces

①HUB Headset Volume Knob

②Display

④LEFT Arrow Key

③UP Arrow Key

HUB Base Interfaces

⑤Menu/Conﬁrm Button - Long press to enter the

main menu/press once to conﬁrm

⑥DOWN Arrow Key

⑦RIGHT Arrow Key

⑧Join/Exit Group A Button for the 3.5mm HUB

Headset - The indicator turns off when the HUB

Headset exit Group A’s conversation, and turns

on in orange after joining in

⑨ 3.5mm Headphone Jack



⑩Join/Exit Group B Button for the 3.5mm HUB

Headset - The indicator turns off when the HUB

Headset exit Group B’s conversation, and turns

on in orange after joining in

⑫ANNOUNCE Button - Press and hold the button

while making an ANNOUNCE, release the button

when ﬁnished

⑭Power Switch

⑬RF Antenna Interface

⑮DC Power Interface

⑯ PGM Audio Input Interface

⑰2-wire Audio Input & Output Interface

⑱ RJ45 Network Port

⑲4-wire Audio Input & Output Interface

(RJ45 network socket)

⑳ UAC Interface

NP-F Battery Bay

① ②③④⑤⑥⑦

⑧⑨⑩⑪⑫

⑬

⑭⑱⑲

⑳

⑮⑯⑰

⑪USB Interface

V-Mount/G-Mount Battery Plate (Subject to the

actual product you purchased)

Product Interfaces

① Power/Connection Indicator

②Microphone

⑨Power Button

③ USB Type-C Interface - For ﬁrmware upgrade, and headset pairing

Headset Interfaces

⑤Volume + Button

⑥Volume - Button

⑦A Button - Lights up when joined Group A, turns off when exited Group A;

Long press for 5 seconds to pair

⑧B Button - Lights up when joined Group B, turns off when exited Group B

④Battery Compartment

⑩Speaker

Product Interfaces

① Charging Indicator

Orange: Charging in progress

Green: Fully charged

② Charging Contact

Charging Case Interfaces

②

③

①

③ DC Charging Interface

Quick Start Guide

Set Up HUB Base

Install the HUB antennas.

Power Up HUB Base

Connect the 12V/2A DC Adapter to the HUB base. Press the Power Switch to turn on.

Note: The HUB Base can be powered using NP-F battery, V-Mount/G-Mount batter y, or DC power supply.

Quick Start Guide

Install Headset Battery

Turn On Headset

Note: The indicator light stops ﬂashing and turns to

static green when the HUB Base and the

Remote Headset(s) are successfully connected.

Mute/Unmute Microphone

Mute/Unmute the headset’s microphone by moving the mic boom up/down.

1.Move the mic boom up to the MUTE position that makes a

CLICK sound, and the HUB Base’s interface displays "MUTE"

corresponding to the headset status.

2.Move the mic boom down to the TALK position that makes a

CLICK sound, and the HUB Base’s interface displays "TALK"

corresponding to the headset status.

TALK

MUTE

Stop-point

The device is now ready for use.

MUTE

TALK

Step 1 : Slide the battery compartment

cover lock

Step 2 : Open the cover Step 3 : Place the batteries into the compartment

and cl ose the battery c over

Name plate

Powe r Switch

Powe r up the Headset

①HUB Base conﬁguration - Master/Slave

②HUB Base battery level

HUB Base Main Display Interfaces

③Headset signal strength

④Headset battery level - turns red in low battery

⑤Headset number

⑥Headset status

TALK: Headset is active to hear and talk

MUTE: Headset is muted to hear only

LOST: Headset lost connection with HUB Base

⑦Network connection status

⑧ WiFi status

①

②

③

④⑤

⑥

⑧

⑦

Quick Start Guide

Master

Quick Start Guide

Headset Status Indicator

①FLASH GREEN: Headset disconnected

②STAT IC GREEN: Headset connection successful

③FLASH RED: Battery low, please change the battery

Pairing Operation

The HUB Base and Remote Headsets that come in one system package will auto pair up right out of box.

Manual pairing is only required when there is a need for adding or changing headset or HUB base to the

system.

Connect the HUB Base and the Headset with a USB-C Cable.

Pairing requires a USB-C cable.

Connect one end to the USB interface on the HUB Base’s front panel, and the other end to the USB-C

interface of the headset.

The HUB Base screen will display the Select Number interface. Locate the designed headset number with

the arrow keys, and press the round Menu/Conﬁrm Button to complete number setting and pairing.

Andere Handbücher für SOLIDCOM C1

Inhaltsverzeichnis

Andere Hollyland Gegensprechanlage Handbücher

Hollyland

Hollyland MARS T1000 Kurzanleitung

Hollyland

Hollyland Solidcom C1 Pro Bedienungsanleitung

Hollyland

Hollyland Solidcom C1 Pro Bedienungsanleitung

Hollyland

Hollyland SOLIDCOM C1 Bedienungsanleitung

Hollyland

Hollyland 0108B Bedienungsanleitung

Hollyland

Hollyland Solidcom C1 HUB8S Bedienungsanleitung

Hollyland

Hollyland HOLLYVIEW LARK 150 Kurzanleitung

Hollyland

Hollyland Solidcom C1 Pro Bedienungsanleitung

Hollyland

Hollyland SOLIDCOM M1 Bedienungsanleitung

Hollyland

Hollyland MARS T1000 Installationsanleitung

Hollyland

Hollyland MARS T1000 Bedienungsanleitung

Hollyland

Hollyland Solidcom C1 Pro Bedienungsanleitung

Hollyland

Hollyland MARS T1000 Bedienungsanleitung

Beliebte Gegensprechanlage Handbücher anderer Marken

Bticino

Bticino LINEA 3000 Bedienungsanleitung

MSI

MSI MSI-140 Bedienungsanleitung

golmar

golmar Stadio Plus Bedienungsanleitung

CyberData

CyberData 011211 series Handbuch

Vidos

Vidos duo M1021 Bedienungsanleitung

Vimar

Vimar ELVOX 7539/E Bedienungsanleitung

SSS Siedle

SSS Siedle BTSV 850-03 Bedienungsanleitung

Dahua

Dahua VTO Series Bedienungsanleitung

Elvox

Elvox 5651 Bedienungsanleitung

Videx

Videx VIDEOKIT Series Bedienungsanleitung

Rocom

Rocom Doortello Business FW T2.05W2.04 Bedienungsanleitung

Viking

Viking E-35-EWP Bedienungsanleitung

Safeguard Supply

Safeguard Supply LRA-EX1000 Bedienungsanleitung

SSS Siedle

SSS Siedle BFCV 850 Series Bedienungsanleitung

GRD

GRD MAX V2 Bedienungsanleitung

Alecto

Alecto ADI-250 Bedienungsanleitung

Aiphone

Aiphone IE-8MD Bedienungsanleitung

Perel

Perel EDB4 Bedienungsanleitung