Holodia HOLOFIT GO Bedienungsanleitung
HOLOFIT GO
FOR VIVE FOCUS
INSTALLATION
INSTRUCTIONS
1) PUT YOUR HEADSET ON AND
OPEN THE VIVEPORT STORE
Use your controller to click the Store icon at the bottom of the
screen.
NOTE:If this is your first time using the headset, make sure you're logged into your
Viveport account. You'll find the sign in form on the right of the screen.
2) SEARCH THE STORE FOR
HOLOFIT
Select HOLOFIT from the store to install it. When it installs, start it.
3) REGISTER YOUR HEADSET
ON myholofit.holodia.com
Start HOLOFIT, and write down the 5-digit number that appears.
Go to your MyHolofit dashboard and put in this number in the
corresponding field.
1.
2.
4) CONNECT YOUR HEADSET TO THE
FITNESS MACHINE
NOTE: If you're using the cadence sensor for your bike, move on to the next page
for installation instructions.
A) Start HOLOFIT and you will be automatically taken to the Bluetooth
settings.
B) Find the fitness machine in the panel on your right and click it. Just
make sure that you enable your fitness machine's Bluetooth connection
beforehand.
Your fitness machine is now paired with HOLOFIT Go.
NOTE: For the connection to work, make sure that your fitness machine is disconnected from
any other devices (i.e. your phone) before you put on the headset.
5) INSTALL THE CADENCE SENSOR
(OPTIONAL)
A) You'll first have to put the battery you received in your package into the
sensor.
Open the back panel, put the battery in
and close the back panel. The sensor will
now start working.
Hook the sensor on using the elastic bands you received in the package.
C) Finally, connect HOLOFIT to the cadence sensor using Bluetooth. It will
automatically be visible in the pairing settings on HOLOFIT.
Refer to step 4 for step-by-step instructions.
B) Attach the cadence sensor to the
inside of one of the pedals. Find a spot
where it won't be touching you or the bike
while you're cycling.
ENJOY
HOLOFIT
www.holodia.com
Copyright © 2020 Holodia SA.
All rights reserved.
Andere Holodia Virtual-Reality-Headset Handbücher
