HOMCOM KPT-2000B 4505L Installationsanleitung

ASSEMBLY & INSTRUCTION MANUAL

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY

INcjd065_EN_FR_ES_IT

INcjd065_FR_ES_IT_820-254

Important safeguards

- This appliance can be used by children aged from 8 years and above and persons

with reduced physical, sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or instruction

concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user maintenance shall not

be made by children without supervision.

- Children of less than 3 years should be kept away unless continuously supervised.

Children aged from 3 years and less than 8 years shall only switch on/off the

appliance provided that it has been placed or installed in its intended normal

operating position and they have been given supervision or instruction concerning

use of the appliance in a safe way and understand the hazards involved. Children

aged from 3 years and less than 8 years shall not plug in, regulate and clean the

appliance or perform user maintenance.

CAUTION - Some parts of this product can become very hot and cause burns.

Particular attention has to be given where children and vulnerable people are

present.

- If the supply cord is damaged, it must be replaced by the manufacturer, its service

agent or similarly qualiﬁed persons in order to avoid a hazard.

- CAUTION: In order to avoid a hazard due to inadvertent resetting of the

thermal cutout, this appliance must not be supplied through an external

switching device, such as a timer, or connected to a circuit that is regularly

switched on and off by the utility.

- WARNING: In order to avoid overheating, do not cover the heater.

- The heater must not be located immediately below a socket-outlet.

- The heater must be installed at least 1.8 m above the ﬂoor.

- Means for disconnection having a contact separation in all poles must be

incorporated in the ﬁxed wiring in accordance with the wiring rules.

Fixed heaters are to be installed so that switches and other controls cannot be

touched by a person in the bath or shower.

Warning: this product can be installed

in bathrooms but only out of the

volumes according the national

wiring rules (For France NF C 15-100)

Note: The above drawing is for

reference only.

We suggest that you to contact a

professional electrician for assistance.

Function operation (both machine & remote control)

1.Plug in and switch on by pressing the red switch 0/I, enter into standby mode and

display shows“ ”:

2. Press” “ button, enter into fan mode and display shows ”- -“

3. Press” “ button for one time, the product works with low heating(1000W) and

display shows“-- / I”. Press again, changes to high heating(2000W) and display

shows “ -- / I / II”.

4. Press” “ button to set timer(1-12hours). Pressing the button one time increases

one hour for timer. After setting time, the display will show current setting time for 5

seconds, then resume to previous display, meanwhile the light of ” “ will on.

Below photo is an example of setting 8h:

5. Appointment “ON”: In standby mode, press timer button, you can set the

appointment turn-on time in 1-12 hours. After complete setting, the display shows

the appointment turn-on time and also the light ” “ is on. The display

automatically decreases 1 hour for each hour passed. When the appointment

power-on time arrived, the product will automatically turns on. The default setting

temperature is 23 ℃ during appointment turn-on. Below photos is an example to

set appointment turn-on time to 8 hours:

Note: If not setting the temperature and weekly program, the product will

automatically turn-off after 12 hours of continuous work, and enter into standby.

Function operation (ONLY by remote control)

1. Set current TIME/DAY (can set both under standby mode & working status):Press ”

”button for one time, the display shows ”12“ as default,press“ / “ to set

current hour; press “ “ again, the display shows minute “ 30“, press” / “ to

set current minute ,then press “ “ for third time, the display shows the day“ ”,

press “ / “ to set current day(Monday-Sunday: d1-d7) . Then press” “ to

conﬁrm the setting, the display will show previous settings.

For example: Setting to Wednesday, 9:30 AM under 25℃ under II heating, pls. refer

to the following photos:

Note: - The above setting was continue to memorized after power off . then press” “ to

check the current time & day in turn;

-The timer is in 24 hours.

-00~59 minutes.

Note:

When setting temperature, it will use SMART working way:

1)Setting temperature – ambient temperature>2, working with high power-2000W;

2)0<Setting temperature – ambient temperature=<2, working with low power-

1000W;

3)Setting temperature – ambient temperature=0, the cool fan will work for

30seconds to below out the heating left inside, then enter into standby mode.

4)after enter into standby mode, if the machine cool down and:

Setting temperature – ambient temperature>=2, the machine will wake up and

resume to heating.

2.Set temperature

During working status, Press“ / “,the display shows ” 23 “ as default. Press

” / “ to set desired temperature (temperature range 10-49), press” “ to

conﬁrm the setting.

For exampleThe current ambient temperature is 15, when set temperature to

25,the display shows as below:

If you want to cancel the setting temperature, press " " key to choose the heating

I or II, the product will work without setting temperature. While the display " " will

go off, and will show “--”. After continuous heating for 12hours, the cool fan will work

for 30seconds and enter into standby mode.

Set weekly program(ONLY by remote control)

After complete setting of current TIME/DAY, below is the steps to set weekly program:

1)Press ” “, the product enter into working status.

2)Press“ “,the display shows ”P“, it enter into weekly program setting:

3).Press” “,the display shows d1~d7, set to working day(Monday-Sunday: d1~d7).

Such as set Monday:

Note:

For both current day & set working day:

Monday-Sunday: d1~d7

4).Press” “, the display shows P1~P6(for each day, it can be set maximum 6 time

periods).Such as setting P1:

5).Press” “,the display shows 00”as default. Press” “ continuously to set the

turn-on time. Such as set the turn-on time 7:00am (As ﬁgure );

6).Press” “,the display shows the previous step turn-on time by default. Press ” “

continuously to set the turn-off time. Such as set the shutdown time at 13:00pm:

7).Press” / “to setting the target temperature(Temperature range 10-49);

8). Repeat steps 2-7 above, you can set the whole weekly program. Then press” “to

conﬁrmed;

9). To cancel the weekly function, press the " " again , the light "P" will go off. The

weekly program is off. The product will revert to the previous function working status.

Note:

-After the above setting are completed and P program is working,press” / /

/ “to check the setting time of each day and time periods,

-Press” / “,set working temperature under different time periods.

- The turn-on time periods 0~24hours, cannot set to minutes;

-The“TIME/OFF”can not be less than“TIME/ON”;

-When the“TIME/ON” is the same as“TIME/OFF”, the time period enter into standby

mode;

Set open-window detection(ONLY by remote control)：

1). Press“ “the product enter into working status. Heating for a moment untill

stable.

2).Press” ” by remote control,light “ / ℃“ will on; The temperature display”23”by

default.Press” / “to set target temperature. During open-window detection

mode, once the ambient temperature drops 5-10℃ within 10 minutes, then the

product will stop working within 30 minutes and enter into stand by mode. Then press

“ “ again to turn off the open-window detection, the light “ ”will go off and the

product will resume to previous working mode.

Below is an example to set 23℃ during open-window detection.

4).When turn on at the same time for both open-window detection and weekly

program, during the OFF period of weekly program, the product doesn’t work. During

the working status of weekly program, the temperature is subject to the setting

temperature of open-window detection. Below is a example:

Note:

- Before turn on weekly program: it must set day and time period,otherwise the

weekly default state is “00”, which does not work.

CLEANING AND MAINTENANCE

1. If you don’t use the heater for a long time, please wipe the surface and put it into the box.

Lay the carton on the ventilated and dry place. Humidity and force press was prohibited.

2. Wait for the machine being cool and pull out the plug, then clean it. Wipe it clean with wet

washcloth or cleaner. Never directly wash with water, do not drop the water into the machine.

Never clean it with acids, chemical thinner, gasoline, benzene etc.

Before use it again, please check it and make sure the outlet ventilation have no sundries.

Environment

Meaning of crossed –out wheeled dustbin:

Do not dispose of electrical appliances as unsorted municipal waste, use

separate collection facilities.

Contact you local government for information regarding the collection

systems available.

If electrical appliances are disposed of in landﬁlls or dumps, hazardous

substances can leak into the groundwater and get into the food chain,

damaging your health and well-being.

When replacing old appliances with new ones, the retailer is legally

obligated to take back your old appliance for disposals at least free of

charge.

Informationrequirementsforelectriclocalspaceheaters

Model identifier(s):KPT-2000B 4505L

Item Symbol Value unit Item unit

Heat output Type of heat input,for electricstorage local

space heaters only (selectone)

Nominal heat output Pnom 2,0 kW manual heat charge control,with

integratedthermostat

[no]

Minimum heat

output(indicative)

Pmin 0kW manual heat charge controlwith

room and/or outdoor temperature

feedback

[no]

Maximum

continuous heat

output

Pmax,c 2,0 kW electronicheat charge controlwith

room and/or outdoor temperature

feedback

[no]

Auxiliary electricity

consumption

fan assistedheat output [no]

At nominal heat

output

max 0 kW Type of heat output/room temperature

control (selectone)

At minimum heat

output

min 0 kW singlestage heat outputand no room

temperature control

[no]

Instandby mode el

sb 0,000 kW Two or more manual stages, no room

temperature control

[no]

with mechanic thermostatroom

temperature control

[no]

with electronicroom temperature

control

[no]

electronicroom temperature control

plus day timer

[no]

electronicroom temperature control

plus week timer

[yes]

Other control options (multipleselections

possible)

room temperature control,with

presence detection

[no]

room temperature control,withopen

window detection

[yes]

withdistancecontroloption [no]

withadaptivestartcontrol [no]

withworking time limitation [yes]

withblackbulb sensor [no]

Mesures importantes de sécurité

- Cet appareil peut être utilisé par des enfants à partir de 8 ans et par des personnes

aux capacités physiques, sensorielles ou mentales réduites ou manquant

d'expérience et de connaissances, à condition qu'elles soient supervisées ou

qu'elles aient reçu des instructions concernant l'utilisation en toute sécurité de

l'appareil et qu'elles comprennent les risques encourus. Les enfants ne doivent pas

jouer avec l'appareil. Le nettoyage et l'entretien de l'appareil ne doivent pas être

effectués par des enfants sans surveillance.

- Les enfants de moins de 3 ans doivent être tenus à l'écart, sauf s'ils sont surveillés

en permanence.

Les enfants âgés de 3 à 8 ans ne peuvent allumer ou éteindre l'appareil que si ce

dernier est placé ou installé dans sa position normale de fonctionnement et qu'ils

sont supervisés ou ont reçu des instructions concernant l'utilisation de l'appareil en

toute sécurité et comprennent les risques encourus. Les enfants âgés de 3 ans à

moins de 8 ans ne doivent pas brancher, régler et nettoyer l'appareil ou effectuer des

opérations d'entretien.

ATTENTION - Certaines parties de ce produit peuvent devenir très chaudes et

provoquer des brûlures. Une attention particulière doit être accordée aux

endroits où des enfants et des personnes vulnérables sont présents.

- Si le cordon d'alimentation est endommagé, il doit être remplacé par le fabricant,

son agent de service ou des personnes de qualiﬁcation similaire aﬁn d'éviter tout

risque.

- ATTENTION : Aﬁn d'éviter tout risque de réenclenchement intempestif du

disjoncteur thermique, cet appareil ne doit pas être alimenté par un dispositif de

commutation externe, tel qu'une minuterie, ni raccordé à un circuit régulièrement

allumé et éteint par le service public.

- AVERTISSEMENT : Aﬁn d'éviter toute surchauffe, ne couvrez pas le

chauffage.

- Le chauffage ne doit pas être monté juste en dessous d'une prise de courant.

- Le chauffage doit être installé à au moins 1,8 m au-dessus du sol.

- Des moyens de déconnexion ayant une séparation des contacts dans tous les pôles

ENFR

doivent être incorporés dans le câblage

ﬁ x e c o n f o r m é m e n t a u x r è g l e s d e

câblage.

L e s cha u ff a g e s ﬁ x e s d o i v e n t êtr e

inst all és de man ière à ce que les

interrupteurs et autres commandes ne

puissent être touchés par une personne

dans la baignoire ou la douche.

Attention : ce produit peut être installé

d a n s l e s s a l l e s d e b a i n s m a i s

uniquement en dehors des volumes

selon les règles nationales de câblage

(pour la France NF C 15-100).

Note : Le dessin ci-dessus est donné à

titre indicatif.

Nous vous suggérons de contacter un

électricien professionnel pour

assistance.

Volume extérieur

Masse

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere HOMCOM Heizung Handbücher

HOMCOM

HOMCOM Vesuvius ND-18D3CL Installationsanleitung

HOMCOM

HOMCOM 820-314V00 Bedienungsanleitung

HOMCOM

HOMCOM 820-336V70 Bedienungsanleitung

HOMCOM

HOMCOM 820-349V90 Bedienungsanleitung

HOMCOM

HOMCOM 820-312V00 Bedienungsanleitung

HOMCOM

HOMCOM 820-359V80 Bedienungsanleitung

HOMCOM

HOMCOM 820-260V70 Handbuch

HOMCOM

HOMCOM 820-335V90WT Bedienungsanleitung

HOMCOM

HOMCOM 820-250V70 Installationsanleitung

HOMCOM

HOMCOM 850-223V90 Bedienungsanleitung

HOMCOM

HOMCOM 820-273 Bedienungsanleitung

HOMCOM

HOMCOM 820-271 Bedienungsanleitung

HOMCOM

HOMCOM 820-282V80 Installationsanleitung

HOMCOM

HOMCOM 820-313V00 Bedienungsanleitung

HOMCOM

HOMCOM 820-251V70 Installationsanleitung

HOMCOM

HOMCOM 820-247 Installationsanleitung

HOMCOM

HOMCOM 850-224V90 Bedienungsanleitung

HOMCOM

HOMCOM 824-051V90 Installationsanleitung

HOMCOM

HOMCOM 820-296V90 Bedienungsanleitung

HOMCOM

HOMCOM 820-316V00 Bedienungsanleitung

HOMCOM

HOMCOM 820-278 Installationsanleitung

HOMCOM

HOMCOM 820-274 Technisches Handbuch

HOMCOM

HOMCOM 820-311V00 Bedienungsanleitung

HOMCOM

HOMCOM Hs93363 Bedienungsanleitung

Beliebte Heizung Handbücher anderer Marken

oventrop

oventrop Regucor Series Bedienungsanleitung

Blaze King

Blaze King CLARITY CL2118.IPI.1 Bedienungsanleitung

ELMEKO

ELMEKO ML 150 Bedienungsanleitung

BN Thermic

BN Thermic 830T Bedienungsanleitung

KING

KING K Series Leitfaden

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Kurzanleitung

Well Straler

Well Straler RC-16B Bedienungsanleitung

EUROM

EUROM 333299 Bedienungsanleitung

Heylo

Heylo K 170 Bedienungsanleitung

Eterna

Eterna TR70W Bedienungsanleitung

Clarke

Clarke GRH15 Bedienungsanleitung

IRSAP

IRSAP The Radiator Company Ovali Bedienungsanleitung

Empire Heating Systems

Empire Heating Systems WCC65 Bedienungsanleitung

Wetekom

Wetekom 92 86 43 Bedienungsanleitung

Desa

Desa SPC170-F Bedienungsanleitung

Watlow

Watlow Watrod Electric Tubular Heaters Bedienungsanleitung

Haverland

Haverland ECO-DRY GPS Series Stücklistenhandbuch

Stelpro

Stelpro ASILVC2060 Series Bedienungsanleitung