HOME8 TripleShield C2S6 Bedienungsanleitung

Model No. OPG2201

What’s inside:

1x Security Shuttle 2x Wi-Fi Cameras 1x External Siren

2x Door + Window Sensors 1x Infrared Motion Sensor 2x Keychain Remote

2x Power Adapters

2x Extension Cables

Mounting

Accessories

16x

Broadband internet connection, iOS or Android phone and home router required.

TripleShield C2S6

Interactive Security System

Quickstart Guide

4x Double-Sided Tapes

2x Batteries (CR123A)

1x Power Adapter

1x Ethernet Cable

16GB USB

Thumbdrive

Mounting

Accessories

Double-Sided

Tape

1 x

1x Double-Sided Tape

1x Battery (CR123A)

English

Step 1: Assemble your hardware

Step 2: Set up your smartphone

Unpack all of your hardware within 1-10 feet of your home router.

• Connect Security Shuttle to your DHCP-enabled router with the included Ethernet cable

• Connect Security Shuttle and Wi-Fi camera to power adapters and plug them in

• Add batteries to your Door + Window sensors

Your phone will disrupt the setup process if it goes to sleep. So before you register your devices,

disable the autolock feature on your smartphone. You can enable it after you’ve set up your

system.

1-10 ft

• Connect your smartphone to your home Wi-Fi

• Download the Home8 app from the App Store or Google Play

• Follow the on-screen instructions and set up your account

English

Step 3: Mount your devices

Before you mount your sensors, see if they’re within Security Shuttle’s range.

•Take your sensors to the rooms you want to use them in

• Open the battery cover of each device you want to install

If you get a notiﬁcation that says your device has been tampered with, it’s within range.

Replace the battery cover and mount the device with the included screws or double-sided tape.

Battery

Before you mount your cameras:

• Take them to the room you want to use them in and plug them in

• Wait for your cameras to connect

If you see video, place your cameras and enjoy.

Can I save the video(s) recorded on the ﬂash drive to my PC?

We take your security seriously. There are two levels of security steps we provide to ensure

your data are secured. First, it is required all users to go through an authentication process

with encrypted transmission during sign-in. Secondly, after the authentication process,

everything is encrypted via the internet; Home8 App uses bank-level AES data encryption.

How can I be certain other people are not stealing my identity on the cloud?

While we cannot email you the existing account password, you may request for a new

password by going to the Home8 App login page, and tap the “Forgot password?” link and

then go through the steps to request a randomly generated password to be sent to your

registered email. (Password can be changed by tapping on the Sidebar Menu button on the

app Main Menu, and then tap “My Proﬁle”)

How do I retrieve my Home8 Mobile App password?

With your privacy in mind, we store your videos locally. Event-triggered video recordings

are stored on your local ﬂash drive plugged in your Security Shuttle USB port, and for the

live video clips manually recorded, they are stored on your smart device.

How can I be sure unauthorized people are unable to look at my videos on the cloud?

Home8 App is built to support multi-location management. You can manage as many

locations as you would like, and we do not place a limit on the number of Home8 Systems

you can purchase.

How many locations can I manage from my Home8 App?

FAQ

Yes! You can take the USB ﬂash drive from the Security Shuttle and plug it directly to your

PC and access the recorded video.

(Remember to plug the USB ﬂash drive back into the Security Shuttle when ﬁnished.)

How can I be sure unauthorized people are unable to look at my videos on the cloud?

FAQ

We recommend you to change your password as soon as possible by using any of the following

methods to sign in to your account to make the change to the password:

- Use a smart device with Home8 App installed.

- Visit https://web.home8systems.com on a web browser.

Alternatively, you may also contact us to disable your account for you.

If I lose my smartphone, what should I do?

Because Home8 System is a fully IoT interactive system, it will require the following:

- Broadband Internet connection (dial-up connections are not supported)

- Internet Router with an available LAN port.

- Smartphone with a Data Plan (for using the App features such as push notiﬁcation, and video

streaming)

What are the requirements prior to purchasing an Home8 System?

Yes, visit www.home8systems.com , and then access user manuals.

Is there a place I can view the user manual online?

If a camera is showing as “ofﬂine”, try power cycle on the camera ﬁrst and wait approximately

two minutes, if the ofﬂine situation persists, try moving the camera closer to the Security

Shuttle and power cycle the device again. After tried the methods above, if the ofﬂine status is

still not resolved, please contact our Technical Support for further troubleshooting assistance.

What can I do if a camera is ofﬂine?

What can I do if my system is ofﬂine?

First, try checking your internet connection, if the connection is working properly, then unplug

the network cable from your Security Shuttle for 10 seconds, and then reconnect it. If the

Security Shuttle is still ofﬂine after 5 minutes, please contact our Technical Support for further

troubleshooting assistance.

V 2.0

Troubleshooting Tips

If you’re having trouble installing your devices, see if they’re listed in your Home8 app:

• Navigate to > Device Management to see if all your devices are listed

• Tap + next to the device category and follow the on-screen instructions to add any missing devices

Are your devices listed in your app?

Are your devices communicating with Security Shuttle?

• If your devices don’t connect to Security Shuttle, they might be too far away. Take them to a location that’s closer to

Security Shuttle and try again.

• If they do connect, you’ll know the range of your device and where to install a range extender.

• Alternatively, you can move Security Shuttle closer to your device.

• If your devices still don’t communicate with Security Shuttle, even when they’re in the same room, navigate to >

Device Management > + on the Home8 app to add your devices again.

V1.0

99200207MIG

Do you need to reset your camera?

If your camera isn’t communicating with Security Shuttle, your app may ask you to reset your camera.

• Push and hold the reset button locate on the backside of the camera over 5 seconds

• Return to the app and follow the onscreen instructions

Need help installing your Home8 system?

http://www.home8alarm.com/download/

Support-global@home8systems.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HOME8 Sicherheitssystem Handbücher

HOME8

HOME8 V63020US Bedienungsanleitung

HOME8

HOME8 SRN1300 Bedienungsanleitung

HOME8

HOME8 C12014 Bedienungsanleitung

HOME8

HOME8 H13012US Bedienungsanleitung

HOME8

HOME8 PNB1301 Bedienungsanleitung

HOME8

HOME8 V43020US Bedienungsanleitung

HOME8

HOME8 ActionView Bedienungsanleitung

HOME8

HOME8 C13011US Bedienungsanleitung

HOME8

HOME8 AlarmShield Bedienungsanleitung

HOME8

HOME8 IAP1301 Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung