Keep the power cord in good condition, and replace damaged cords immediately. Do not use the cord to pull the plug from the
outlet. Keep the cord away from materials and surfaces that could damage cords. The risk of electric shock increases when the power
cord is damaged.
Always use the appropriate extension cord, making sure it is rated for use with power tools. Always be sure the extension cords
are in good condition, free of cuts or nicks in the insulation. If using the power tool in an outside area with an extension cord, make sure
the cord is rated for outdoor use.
Do not make contact with a grounded surface while using this power tool. Contact with surfaces like pipes, radiators or major
appliances increases your risk of electric shock.
Use common sense while operating this power tool.
Do not use this tool if you are:
• Feeling tired or are under the influence of alcohol or drugs.
• Wearing loose clothing or jewelry. Keep long hair pulled back and away from moving parts.
• Overreaching or have improper footing. Handling the tool in this way could cause serious injury.
When using this power tool always:
• Wear the proper safety equipment, such as safety goggles, dust masks, non-skid shoes, etc.
• Check to be sure all adjusting keys or wrenches have been removed before starting the power tool.
• Check to be sure the power switch is in the “OFF” position before plugging the power tool into an electrical outlet.
Follow these steps to maintain safe working conditions and good working condition of power tools. Improper care can result in
electric shock or serious injury.
• Secure and support the work piece using clamps. Do not use your hands to hold the piece in place.
• Use the correct tool for the job. Using the correct tool is safer and faster.
• Make sure the power switch is in good working order. If the power switch no longer turns the tool “ON” or “OFF”,
discontinue use, and have the tool replaced or repaired.
• Remove the power cord from the power source before storage, changing accessories, or moving the tool.
• Keep out of reach of children, or any untrained person. Store tools in a safe and dry place.
• Keep tools clean, and cutting tools sharp. Maintaining tools with proper care will increase the life of the power tool, and
reduce the risk of injury.
• Check to be sure all moving parts are free from binding and are properly aligned.
• Use only accessories that are recommended by the manufacturer for your tool model.
• Hold the tool by the insulated grip when using in an area where contact with a “live” wire is a possibility.
Safety glasses and ear protection must be worn during operation.
SERVICE
Tool service must be performed only by qualified repair personnel. Service or maintenance by unqualified personnel could result in a
risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance section of this manual. Use
of unauthorized parts or failure to follow Maintenance Instructions may create a risk of shock or injury.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
This manual contains important information regarding safety, operation, maintenance and storage of this product. Before use, read carefully
and understand all warnings, cautions, instructions and labels. Failure to do so could result in serious personal injury, property damage or
even death.
Model CMS814UL Compound Miter Saw 6
