Honeywell TrueCLEAN Bedienungsanleitung
OPERATION
AND SERVICE
GETTING
STARTED WIRING
MOUNTING APPENDICES
INCLUDED IN THIS ENHANCED AIR CLEANER BOX
A1Door FH8000A
A2Door FH8000F
Cabinet
Filter
Enhancement module
ESafety screen
FDuct gasket tape
GReturn duct adapters
HFurnace adapters (FH8000F)
IAir flow sensor (FH8000A)
J1Installation components (FH8000A)
J2Installation components (FH8000F)
KInstallation Instructions
M28898
Tools needed to install Enhanced Air Cleaner
Standard screwdriver
Phillips screwdriver
Metal cutter
Drill
Duct Sealant
Replacement Filter Table
Enhanced Air
Cleaner
Honeywell
Model
Replacement
Filter Part Number
Air Handlers FH8000A1620
FH8000A2020
FH8000A2520
FR8000A1620
FR8000A2020
FR8000A2520
Forced Air Furnace FH8000F1625
FH8000F2025
FR8000F1625
FR8000F2025
A1A2
F
K
I
H
G
J1J2
ECB D
68-0308EFS-03
68-0308EFS-03
TrueCLEAN™ Enhanced Air Cleaner
Sizes: Air Handler 16x20, 20x20, 25x20 • Furnace 16x25 and 20x25
PROFESSIONAL INSTALLATION GUIDE.
GUIDE D’INSTALLATION PROFESSIONNELLE.
GUÍA DE INSTALACIÓN PROFESIONAL.
OPERATION
AND SERVICE
GETTING
STARTED WIRING
MOUNTING APPENDICES
TrueCLEAN™Enhanced Air Cleaner
NEED HELP? For assistance with this product please visit http://yourhome.honeywell.com
or call Honeywell Customer Care toll-free at 1-800-468-1502.
Read and save these instructions.
® U.S. Registered Trademark. Patents pending. Copyright © 2010 Honeywell International Inc. All rights reserved.
?
TrueCLEAN™Enhanced Air Cleaner 68-0308EFS—03 1
GETTING STARTED
What to Expect From Your Honeywell
TrueCLEAN™Enhanced Air Cleaner....................................2
How it Works........................................................................2
Application Considerations..................................................3
Important Installation Requirements ...................................5
Personal Safety....................................................................5
MOUNTING
Choosing a Mounting Method..............................................6
Which Honeywell Enhanced Air Cleaner model
do you have? .......................................................................6
Mounting the FH8000A (Air Handler) Honeywell
Enhanced Air Cleaner ..........................................................7
Mounting the FH8000F (Furnace) Honeywell
Enhanced Air Cleaner ........................................................10
WIRING
Before Wiring the Honeywell Enhanced Air
Cleaner ..............................................................................14
Wiring the FH8000A (Air Handler) Honeywell
Enhanced Air Cleaner ........................................................15
Wiring the FH8000F (Furnace) Honeywell
Enhanced Air Cleaner ........................................................17
OPERATION AND SERVICE
Startup and Operation .......................................................19
Checking Air Cleaner Operation.........................................19
Maintenance......................................................................20
Troubleshooting.................................................................23
APPENDICES
Specications, Dimensions, and Approvals .......................25
Parts List............................................................................28
Warranty ............................................................................29
GETTING
STARTED
Congratulations for selecting the Honeywell TrueCLEAN™ Enhanced Air Cleaner for your home comfort system!
The Honeywell Enhanced Air Cleaner is proven to remove and destroy airborne germs and allergens, including
viruses, bacteria, and mold spores from air moving through the lter. The Honeywell Enhanced Air Cleaner is a
cornerstone of Honeywell’s home comfort solutions for providing cleaner air in your home.
The installer should review these points with the homeowner and answer any questions they have before leaving
the job site.
When Installing this Product...
1. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous
condition.
2. Check the rating given in the instructions and on the product to make sure the product is suitable for your
application.
3. Installer must be a trained, experienced service technician.
4. After installation is complete, check out product operation as provided in these instructions.
What to Expect From Your Honeywell TrueCLEAN™ Enhanced
Air Cleaner
The Honeywell TrueCLEAN™ Enhanced Air Cleaner provides extremely high ltration performance while
destroying captured contaminants, including viruses, bacteria, and mold spores. The Honeywell Enhanced Air
Cleaner treats the entire air stream through a state of the art, three-stage process.
Stage 1
In stage one, particles in the air are electrically charged by an array of ionizer points as they enter the Honeywell
Enhanced Air Cleaner.
Stage 2
In stage two, the charged particles are electrically attracted and captured in the air lter cartridge, which is located
within an electric eld.
Stage 3
In stage three, captured particles are destroyed by electrical current ow and ion bombardment.
How it Works
TrueCLEAN™Enhanced Air Cleaner 68-0308EFS—03
2
GETTING
STARTED
Application Considerations
The Honeywell Enhanced Air Cleaner is designed for use in the return air duct of a forced air heating, cooling,
and ventilation system. Models FH8000A1620, FH8000A2020 and FH8000A2520 are specically designed for
use in systems with an air handler. Models FH8000F1625 and FH8000F2025 are specically designed for use in
systems with a forced air furnace. The Honeywell Enhanced Air Cleaner is CSA certied for shock and electrical
re hazard only.
Air Conditioning
The Honeywell Enhanced Air Cleaner should be installed in a system so that all the return air is circulated through
the Honeywell Enhanced Air Cleaner. It should be located upstream of the air conditioning equipment. This
will help keep the equipment clean and prevent condensation from forming within the Honeywell Enhanced Air
Cleaner.
Humidiers
An evaporative humidier can be mounted upstream of the Honeywell Enhanced Air Cleaner. It is best to install
atomizing humidiers downstream of the Honeywell Enhanced Air Cleaner because hard water salt deposits and
water droplets may damage the Honeywell Enhanced Air Cleaner. If an atomizing humidier must be mounted
upstream of the Honeywell Enhanced Air Cleaner, it should be mounted as far upstream as possible (at least 6 ft.
[1.8 m] recommended), and a standard disposable furnace lter should be mounted between the humidier and
the Honeywell Enhanced Air Cleaner to trap hard water salt deposits and water droplets.
Transitions
If the return air duct or fan coil openings do not t the Honeywell Enhanced Air Cleaner cabinet openings, gradual
transitions are recommended to reduce air turbulence and maximize efciency.
FH8000A – No more than 20 degrees (about 4 in. per running ft.) of expansion should be used on each side of
the transition tting.
FH8000F – No more than 45 degrees (about 8.5 in. per running ft.) of expansion should be used on each side of
the transition tting.
Turning Vanes
If the Honeywell Enhanced Air Cleaner is installed adjacent to a 90 degree duct elbow, turning vanes should be
added inside duct to improve air distribution across the face of the Honeywell Enhanced Air Cleaner.
TrueCLEAN™Enhanced Air Cleaner 68-0308EFS—03 3
GETTING
STARTED
Application Considerations
Electrical Power / Airow Switch
The Honeywell Enhanced Air Cleaner should only be powered when airow is present.
FH8000A – These models are designed for use with an air handler and are equipped with an airow switch (see
Fig. 1), which provides power only when the air handler blower is operating. These models are designed to be
powered from a 208 to 230 VAC single phase power source.
M28899
Fig. 1. Airow Switch.
FH8000F – The furnace control EAC terminals provide power to the unit only when the furnace blower is
operating. These models are designed to be powered from the electronic air cleaner (EAC) terminals on a furnace
control board. If EAC terminals are not available, an alternative airow sensing mechanism such as the Honeywell
50027910-001 Differential Pressure Switch must be used to ensure the Honeywell Enhanced Air Cleaner is only
powered when airow is present. Contact your local Honeywell distributor for information on alternatives.
TrueCLEAN™Enhanced Air Cleaner 68-0308EFS—03
4
GETTING
STARTED
Important Installation Requirements
Personal Safety
• Wear safety glasses while installing the unit.
• Do not cut into any air conditioning or electrical line.
• Follow professional safety standards and all local codes for plumbing, electrical, and mechanical
considerations.
Before Mounting
• Using the gure on the cover and the lists on the inside cover, make sure that you have all the components for
your Honeywell Enhanced Air Cleaner model and the tools to install it.
• Ensure airow direction through the Honeywell Enhanced Air Cleaner matches the arrows on the face of the
lter. The arrows should point towards heating/cooling equipment. The door can be rotated 180 degrees to
accommodate the cabinet orientation.
• The location of the Honeywell Enhanced Air Cleaner should be readily accessible. Enough clearance room
should be provided for periodic replacement of the lter.
If Replacing an Old Air Cleaner
If the Honeywell Enhanced Air Cleaner is not identical in size and shape to the existing air cleaner, before
performing a retrot installation, you might need to add duct transitions to ensure a smooth air ow.
Replacement Filters
Failure to comply with these requirements will result in voided warranty, improper installation, and
service callbacks.
Replacement Filter Table
Enhanced Air Cleaner Honeywell
Model
Replacement Filter
Part Number
Air Handlers FH8000A1620
FH8000A2020
FH8000A2520
FR8000A1620
FR8000A2020
FR8000A2520
Forced Air Furnace FH8000F1625
FH8000F2025
FR8000F1625
FR8000F2025
TrueCLEAN™Enhanced Air Cleaner 68-0308EFS—03 5
MOUNTING
There are two Honeywell Enhanced Air Cleaner designs. One designed for air handlers and one designed for
furnaces. Follow the installation instructions for the Air Cleaner model you have:
Which Honeywell Enhanced Air Cleaner model do you have?
Models FH8000A for air handlers:
These models are installed upstream of the air handler.
This will help keep the air handler clean.
Fig. 2. Model FH8000A Honeywell Enhanced Air
Cleaner.
Models FH8000F for furnaces:
These models are installed upstream of both the
furnace and the air conditioning evaporator coil.
Fig. 3. Model FH8000F Honeywell Enhanced Air
Cleaner.
Choosing a Mounting Method
Before beginning Mounting:
I have conrmed local codes for proper electrical wiring practices.
I have chosen an installation location that meets the requirements on pages 3 through 5.
NOTE: To mount the FH8000A (Air Handler) Honeywell Enhanced Air Cleaner, go to page 7.
NOTE: To mount the FH8000F (Furnace) Honeywell Enhanced Air Cleaner, go to page 10:
M28900
M28901
TrueCLEAN™Enhanced Air Cleaner 68-0308EFS—03
6
MOUNTING
NOTE: For mounting a FH8000F model go to page 10.
CAUTION: Personal Injury Hazard.
Failure to follow this caution may result in personal injury. Sheet metal parts may have sharp edges or burrs.
Use care and wear appropriate protective clothing, eye protections, and gloves when handling parts.
STEP ONE: Identify the Mounting Location and Orientation
a. Identify a mounting orientation for the Honeywell Enhanced Air Cleaner in the return air duct (see Fig. 4).
b. Ensure airow direction through the Honeywell Enhanced Air Cleaner matches the arrows on the face of the
lter. The Honeywell Enhanced Air Cleaner or door can be rotated 180 degrees to accommodate the cabinet
orientation.
c. The location of the unit should be readily accessible. Enough room should be provided to remove the door and
lter for periodic replacement of the air lters.
Fig. 4. Cabinet Orientation for FH8000A models.
Mounting the FH8000A (Air Handler) Honeywell Enhanced Air
Cleaner
M28902
Downflow Horizontal Upflow
Airflow
Airflow
Airflow
TrueCLEAN™Enhanced Air Cleaner 68-0308EFS—03 7
MOUNTING
STEP TWO: Mount Cabinet
WARNING: Electrocution and Unit Damage Hazard.
Failure to follow this warning could result in personal injury or death.
Only a trained, experienced service person should install the Honeywell Enhanced Air Cleaner. A thorough
check of the unit installation should be completed before unit operation. Before performing installation,
service or maintenance operations on unit, turn off all power to unit.
1. Before installing or servicing system, always turn off main power to system. There may be more than one
disconnect switch.
2. Cabinets will support a maximum weight of 400 lbs. (181 kg) when installed beneath a vertical furnace or
air-handling unit. When setting furnace on cabinet, do not drop it into place. Position the furnace correctly on
the cabinet to prevent a corner from slipping down and damaging the cabinet or its components.
a. Turn off power to the heating and cooling system.
b. Remove the existing air handler lter and discard. Excessive system static pressure may result if the
Honeywell Enhanced Air Cleaner is used with other ltration devices.
c. Remove the lter and enhancement module from the Honeywell Enhanced Air Cleaner cabinet.
d. Position the cabinet between the air handler and return air duct (see Fig. 4 on page 7 and Fig. 5).
A transition duct may be required.
RETURN DUCT
ADAPTERS (X4)
MOUNTINGCABINET VERTICAL
RETURN DUCT
ADAPTERS (X4)
MOUNTINGCABINET HORIZONTAL
M28903
Fig. 5. Orientation for FH8000A models for Air Handlers.
NOTES:
1. The air handler cabinet screws holding the lter rack should be used to attach the Honeywell
Enhanced Air Cleaner cabinet.
2. Gasket tape between the air handler and the Honeywell Enhanced Air Cleaner cabinet is already
factory installed.
3. Mounting holes are provided for the air handler attachment.
Mounting the FH8000A (Air Handler) Honeywell Enhanced Air
Cleaner
TrueCLEAN™Enhanced Air Cleaner 68-0308EFS—03
8
Inhaltsverzeichnis
Sprachen:
Andere Honeywell Luftreiniger Handbücher
Honeywell
Honeywell F100 Bedienungsanleitung
Honeywell
Honeywell UC100C Bedienungsanleitung
Honeywell
Honeywell F111 Bedienungsanleitung
Honeywell
Honeywell HUVF Series Bedienungsanleitung
Honeywell
Honeywell HPA-050 Series Bedienungsanleitung
Honeywell
Honeywell F111U Bedienungsanleitung
Honeywell
Honeywell F50E Bedienungsanleitung
Honeywell
Honeywell HFD360 Series Bedienungsanleitung
Honeywell
Honeywell enviracaire 18150 Series Bedienungsanleitung
Honeywell
Honeywell F100 Bedienungsanleitung
Honeywell
Honeywell UV100E series Bedienungsanleitung
Honeywell
Honeywell F116 Bedienungsanleitung
Honeywell
Honeywell ENVIRACAIRE HTT-022 Bedienungsanleitung
Honeywell
Honeywell F52C Bedienungsanleitung
Honeywell
Honeywell POWERPLUS Series Bedienungsanleitung
Honeywell
Honeywell Quiet Clean TOWER Bedienungsanleitung
Honeywell
Honeywell F116 Bedienungsanleitung
Honeywell
Honeywell CR10A Betriebsanleitung
Honeywell
Honeywell AIR GENIUS HFD30 Series Bedienungsanleitung
Honeywell
Honeywell 60001 - Enviracaire Grade Air Purifier Bedienungsanleitung
