Honeywell CL202PEUI Bedienungsanleitung

www.jmatek.com

E-mail: [email protected]

Portable Evaporative Air Cooler

User Manual

Read and save these instructions before use

Refroidisseur d'air par évaporation portatif

Mode d'emploi

Lire ces instructions avant l'utilisation et les conserver

Enfriador de Aire Evaporativo Portátil

Manual de Usuario

Lea y guarde estas instrucciones antes de usar la unidad

Model / Modèle / Modelo:

CL202PEUI

PARTS DESCRIPTION

1) Control Panel 7) Casters

2) Louvers 8) Water Level Indicator

3) Power Cord & Plug 9) Rear Grill

4) Water Fill Door & Ice

Compartment Lid 10) Honeycomb Cooling Media

with Antibacterial Treatment⁺

5) Handle 11) Drain Plug

6) Water Tank

WARNING -- READ AND SAVE THE AIR COOLER SAFETY & MAINTENANCE GUIDE AND USER

MANUAL BEFORE USING THIS PRODUCT. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY

DAMAGE AND/ OR IMPAIR ITS OPERATION AND VOID THE WARRANTY. IN CASE THERE IS

ANY INCONSISTENCY OR CONFLICT BETWEEN THE ENGLISH VERSION AND ANY OTHER

LANGUAGE VERSION OF THE CONTENT OF THIS MATERIAL, THE ENGLISH VERSION SHALL

PREVAIL.

+ Antibacterial Honeycomb is up to 99%A effective in killing certain types of bacteria through 48 hours of continuous use.

ABased on independent laboratory testing (report #WJ20182408), testing the antibacterial and cleaning function of the honeycomb

cooling pads against Escherichia coli (strain #ATCC 25922), Staphylococcus aureus (strain # ATCC 6538), Klebsiella Pneumonia

(strain # ATCC 4352) , as per testing standard JIS L 1902: 2015 Testing for antibacterial activity and efﬁcacy on textile products &

GB 21551.2-2010 antibacterial and cleaning functions for household, and similar electrical appliances-Particular requirements of

material.

USE & OPERATION

CONTROL PANEL

FUNCTION BUTTONS

POWER

Press the button to turn the unit on. The cooler will start automatically at medium speed. After

a few seconds the speed will switch to low. To turn the unit off, press the button again.

SWING

Press the button until the indicator light is illuminated on the

control panel. The louvers will begin to move left to right automatically.

Vertical Air Flow - You can manually adjust the louvers to change vertical

airﬂow.

TIMER

Press the button until the desired time duration setting is selected. When the set time

has passed, the unit will automatically turn off (unit remains in Standby mode until power cord

is unplugged from electrical socket). The function allows you to program the unit for up to

7 hours of use.

SPEED

Press the button repeatedly to change the speed between 3 (High) - 2 (Medium) - 1 (Low).

* Applicable for models with this feature only.

^ Ionizer reduces particles in the air. This is not an air puriﬁer.

Model without Ionizer

Model with Ionizer *^

Louver

Movement

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS (CONTINUED)

COOL/ IONIZER*^

An Ionizer*^ helps to reduce particles in the air, thus promoting cleaner air quality. For models with

the Ionizer*^ feature, pressing the button will activate the Ionizer*^ and you will see Indicator light

is illuminated on the display screen. When is not illuminated, the unit will function in a Fan only mode

without evaporative cooling.

Press the button until the indicator light is illuminated on the display screen. This activates

evaporative cooling. The water pump will operate and you will feel the cooler air after the Honeycomb

Cooling Media is completely wet.

Note: When the COOL indicator light is switched OFF, the unit can still function in a fan only mode

(without evaporative cooling).

Press the button again, both & indicator lights are illuminated on the display screen, this

activates evaporative cooling and Ionizer feature.

To switch off these function, press the button again.

* Applicable for models with this feature only.

^ Ionizer reduces particles in the air. This is not an air puriﬁer.

USE & OPERATION (CONTINUED)

REMOTE CONTROL

*Applicable for models with this feature only.

^ Ionizer reduces particles in the air. This is not an air puriﬁer.

NOTE:

•

The remote control requires CR2025 (3V) batteries for replacement.

Open the battery compartment at the back of the remote control and insert batteries inside.

Care must be taken to insert the batteries according to the correct polarity (+ / –) markings

shown inside the battery compartment.

Always point the remote control signal transmitter towards the unit when operating. Make sure

that the signal path is not obstructed.

Remove the batteries if the unit is not going to be used for an extended period of time.

Do not drop the remote control.

Do not mix different types of batteries such as alkaline, carbon-zinc, or rechargeable batteries.

Do not mix old and new batteries.

Do not recharge the battery.

Exhausted batteries are to be removed from the product and safely disposed of as per local

regulations.

Do not dispose of batteries in ﬁre. Batteries may explode or leak.

WARNING: Caution for ingestion of the small battery. Keep away from children and animals.

WARNING: Chemical Burn Hazard. Keep batteries away from children.See Manual.

This product contains a lithium button/coin cell battery. If a new or used lithium button/coin

cell battery is swallowed or enters the body, it can cause severe internal burns and can lead to

death in as little as 2 hours. Always completely secure the battery compartment. If the battery

compartment does not close securely, stop using the product, remove the batteries, and keep it

away from children. If you think batteries might have been swallowed or placed inside any part of

the body, seek immediate medical attention.

WARNING: Even used cells may cause injury.

POWER : ON / OFF

:Low / Medium / HighSPEED

:Controls the motion of the louversSWING

:Controls the Timer function for automatic offTIMER

COOL

IONIZER*^

Model without

Ionizer

Model with

Ionizer*^

Controls Evaporative Cooling

Ionizer ON/OFF

USE & OPERATION (CONTINUED)

CAUTION:

Unplug the unit from the electrical power outlet before emptying or

reﬁlling the water tank.

Open the Water Fill Door & Ice Compartment Lid, which is located

on the top of the unit. The Water Level Indicator is located at the

front of the unit. Reﬁll the water tank when water level is low. Do not

ﬁll water above the "Max." water level mark to avoid water droplets

collecting on the louvers. Check the water level in the tank before

running the COOL function. Make sure that the water in the tank

is above the minimum water level mark. Running the unit in COOL

mode with inadequate water may cause pump failure.

Note: The water capacity refers to the total volume of water that can

be contained within the air cooler water tank and water distribution

system. The water capacity in the tank at the “Max.” indicator level

may be lower than the actual water capacity of the air cooler.

WARNING: Do not ﬁll water tank with dirty water or salt water. This

can damage the unit and Honeycomb media.

FILLING WITH WATER

Make sure to position the air cooler correctly before you set up and start using the product. Please

refer to the COOLER LOCATION section of the separate Safety & Maintenance Guide.

COOLER LOCATION

Water Fill Door & Ice

Compartment Lid

The unit is equipped with a low water sensor. In Cooling Mode, when water in the tank is below the

minimum level, you will hear a beeping sound and the indicator light will ﬂash continuously. The unit

will automatically pause evaporative cooling.

Reﬁll the water tank to deactivate the alarm in cooling mode. First switch OFF the unit and unplug

from the power outlet. Fill the water tank with water above the minimum water level mark. Plug in and

switch ON again.

To deactivate the alarm and continue using the unit as a fan (without evaporative cooling), switch

the unit OFF and then ON again. The Low Water Alarm will not activate in Fan only mode. The Low

Water Alarm will sound again if the COOL function is activated while the water tank is still empty.

LOW WATER ALARM*

USE & OPERATION (CONTINUED)

Below are instructions on how to clean and maintain your air cooler. If the cooler will not be used for

a long period of time, please refer to the STORAGE & MAINTENANCE GUIDELINES located in the

separate Safety & Maintenance Guide.

WARNING:

Before cleaning the unit, switch the unit OFF and disconnect from the electrical socket.

CLEANING & DRAINING THE WATER TANK

• Move the unit to a location where the water can be drained. Remove the cap from the Drain

plug located at the bottom of the unit. Allow the tank to empty.

• Reﬁll the water tank with clean water and drain it completely.

• Reﬁll the water tank with clean water, up to the maximum level.

• Use a damp cloth to remove dirt and dust from the surface of the unit. Never use corrosive

elements or chemicals to clean this product.

• When the product is not in use, store the unit in a dry place out of direct sunlight.

*Applicable for models with this feature only.

USE & OPERATION (CONTINUED)

WARNING: DO NOT operate the Air Cooler when the Rear

Grill is removed from the Air Cooler, or if there is a loose-

ﬁtting Rear Grill. Doing so can cause serious injury or

dangerous electrical shock.

CLEANING THE HONEYCOMB COOLING MEDIA WITH ANTIBACTERIAL TREATMENT⁺

The appliance is supplied with a Mesh Filter and Honeycomb Cooling Media with Antibacterial

Treatment⁺.

The Mesh Filter and Honeycomb Cooling Media with Antibacterial Treatment⁺ are located inside

the Rear Grill. See Figure 1 for instructions on how to remove them from the unit for cleaning and

maintenance.

Do not run the unit in COOL mode with stale water in the tank. You must empty the water tank and

reﬁll with fresh water, especially if the tank has not been cleaned in a long time.

The cleaning frequency for the Honeycomb Cooling Media with Antibacterial Treatment⁺ depends

on local air and water conditions. In areas where the mineral content of water is high, mineral

deposits may build up on the Honeycomb Cooling Media with Antibacterial Treatment⁺ and restrict

air ﬂow. Draining the water tank and reﬁlling with fresh water at least once a week will

help reduce mineral deposits. If mineral deposits remain on the Honeycomb Cooling Media with

Antibacterial Treatment⁺ , the media should be removed and washed under fresh water. The media

should be cleaned every two months or sooner, depending on your needs.

For best results allow the Honeycomb Cooling Media with Antibacterial Treatment⁺ to dry after each

use by turning off the cool function 15 minutes before turning the unit off.

Removing the Honeycomb Cooling Media with

Antibacterial Treatment⁺ : Figure 1:

Honeycomb

Frame

Honeycomb

Cooling Media with

Antibacterial Treatment⁺

Screws

Rear Grill

+ Antibacterial Honeycomb is up to 99%A effective in killing certain types of bacteria through 48 hours of continuous use.

ABased on independent laboratory testing (report #WJ20182408), testing the antibacterial and cleaning function of the honeycomb

cooling pads against Escherichia coli (strain #ATCC 25922), Staphylococcus aureus (strain # ATCC 6538), Klebsiella Pneumonia

(strain # ATCC 4352) , as per testing standard JIS L 1902: 2015 Testing for antibacterial activity and efﬁcacy on textile products &

GB 21551.2-2010 antibacterial and cleaning functions for household, and similar electrical appliances-Particular requirements of

material.

•

Remove all the screws from the Rear Grill of the Air

Cooler.

Carefully pull out the rear grill from the cooler.

Remove the screws on the base of the Honeycomb

Frame and slide out the Honeycomb Cooling Media

with Antibacterial Treatment⁺.

Replace or clean media with water and a damp cloth as

needed.

DESCRIPTION DES PIECES

1) Panneau de Contrôle 7) Roulettes

2) Grilles d'Aération 8) Indicateur de Niveau d'Eau

3) Cordon Electrique & Prise 9) Grille Arrière

Porte de Remplissage d'Eau et

Couvercle du Compartiment

de Glaçon

10)

Système de refroidissement

honeycomb avec traitement

antibactérien+

5) Poignée 11) Bouchon de Vidange

6) Réservoir d'Eau

AVERTISSEMENT -- LIRE ET SAUVEGARDER LE GUIDE DE SECURITE ET D'ENTRETIEN ET LE

MANUEL D'UTILISATION DU REFROIDISSEUR D'AIR AVANT D'UTILISER LE PRODUIT. NE PAS

SUIVRE CES INSTRUCTIONS POURRAIT ENDOMMAGER ET/OU PORTER ATTEINTE A SON

FONCTIONNEMENT ET ANNULER LA GARANTIE.

+ Honeycomb antibactérien est efﬁcace jusqu'à 99 %A pour détruire certains types de bactéries pendant 48 heures d'utilisation continue.

AD'après des tests de laboratoire indépendants (rapport n ° WJ20182408), testant la fonction antibactérienne et nettoyante des

coussins de refroidissement en nid d'abeille contre Escherichia coli (souche #ATCC 25922), Staphylococcus aureus (souche #ATCC

6538), Klebsiella Pneumoniae (souche #ATCC 4352), conformément à la norme de test JIS L 1902: 2015 conçue pour tester l'activité

antibactériennes et l'efﬁcacité sur les produits textiles, et le test GB 21551.2_2010 conçue pour tester les fonctions et le nettoyage des

appareils électroménagers et analogues.

UTILISATION & FONCTIONNEMENT

PANNEAU DE CONTROLE

BOUTONS DE FONCTION

INTERRUPTEUR

Appuyer sur pour allumer l'unité. Le refroidisseur s'allumera automatiquement à une vitesse

moyenne. Après quelques seconds, la vitesse basculera à faible. Pour éteindre l'unité, appuyez à

nouveau sur le bouton.

OSCILLATION

Appuyer sur le bouton OSCILLATION jusqu’à ce que l’indicateur

d’OSCILLATION soit illuminé sur l’écran d’afﬁchage. Les grilles d’aération

commenceront à osciller de gauche à droite automatiquement. — Débit

d’air vertical – il est possible de régler manuellement les grilles d’aération

verticales pour modiﬁer le débit d’air vertical.

MINUTERIE

Appuyer le bouton de la MINUTERIE jusqu'à ce que le réglage de temporisation désiré est

choisi. Lorsque le temps réglé est dépassé, l'unité s'arrêtera automatiquement (l'unité restera

en mode Veille jusqu'à ce que le cordon d'alimentation soit débranché de la prise électrique). La

fonction de MINUTERIE vous permet de programmer l'unité jusqu'à 7 heures d'utilisation.

VITESSE

Appuyer sur le bouton de la VITESSE à plusieurs reprises pour changer la vitesse entre

3(Élevée)- 2(Moyenne) - 1(Faible).

* Applicable uniquement pour les modèles avec la fonction.

^ Le ioniseur réduit les particules dans l'air. Reduces particles in the air. Ce n'est pas un puriﬁcateur d'air.

Modèle sans ioniseur

Modèle avec ioniseur *^

Mouvement des

grilles d’aération

Inhaltsverzeichnis

Sprachen:

Andere Honeywell Klimaanlage Handbücher

Honeywell

Honeywell CS08AM Bedienungsanleitung

Honeywell

Honeywell CL15AC Bedienungsanleitung

Honeywell

Honeywell CL20AE Bedienungsanleitung

Honeywell

Honeywell ES800 Bedienungsanleitung

Honeywell

Honeywell HF8CESWK5 Bedienungsanleitung

Honeywell

Honeywell CS10PE Bedienungsanleitung

Honeywell

Honeywell CL610PM Bedienungsanleitung

Honeywell

Honeywell CO48PM Bedienungsanleitung

Honeywell

Honeywell CL30XC Bedienungsanleitung

Honeywell

Honeywell CO60PM Series Betriebsanleitung

Honeywell

Honeywell CL201AE Bedienungsanleitung

Honeywell

Honeywell CO25AE Bedienungsanleitung

Honeywell

Honeywell CL60PM Series Bedienungsanleitung

Honeywell

Honeywell HW2CESAWW9 Bedienungsanleitung

Honeywell

Honeywell CL25AE Bedienungsanleitung

Honeywell

Honeywell MM14CHCS Bedienungsanleitung

Honeywell

Honeywell C060Pm Bedienungsanleitung

Honeywell

Honeywell CO30XE Bedienungsanleitung

Honeywell

Honeywell HG Series Bedienungsanleitung

Honeywell

Honeywell CL201AEWW Bedienungsanleitung

Honeywell

Honeywell CS10XE Series Bedienungsanleitung

Honeywell

Honeywell CL48PM Bedienungsanleitung

Honeywell

Honeywell HN Series Bedienungsanleitung

Honeywell

Honeywell CL60PM Series Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung