Honeywell HL10CESWW Bedienungsanleitung

Email: [email protected]

Web: www.jmatek.com

Portable Air Conditioner

User Manual

Read and save these instructions before use

Model :

COOL

DRY

FAN

POWER

TIMER

SLEEP

WATE R

FULL

HIGH

MID

LOW

TIMER

SLEEP

HL10 Series: HL10CESWW, HL10CESWK, HL10CESWG, HL10CESWB

HL12 Series: HL12CESWW, HL12CESWK, HL12CESWG, HL12CESWB

HL14 Series: HL14CESWW, HL14CESWK, HL14CESWG, HL14CESWB

HL14CHESWW, HL14CHESWK, HL14CHESWG, HL14CHESWB

Customer Support:

USA: 1-800-474-2147

CANADA^ : 1-888-209-0999

^Canada Customer Support service

available for models sold in Canada only.

Email: [email protected]

Web: www.jmatek.com

Portable Air Conditioner

User Manual

Read and save these instructions before use

USER TIPS

THANK YOU

Congratulations on your purchase of this versatile Honeywell Portable Air Conditioner.

Important:

Before installing the unit, place it UPRIGHT for 1 hour before use to allow the refrigerant to stabilize.

Air outlet automatically opens when the unit is turned on, and automatically closes when the unit is

turned off. Manually adjust the air vent located at the top of the unit to adjust the direction of air ﬂow.

Honeywell Portable Air Conditioners are ideal for spot cooling. The compressor, condenser and

evaporator are housed in a compact unit. The air is ﬁltered, dehumidiﬁed and cooled while a ﬂexible air

outlet hose sends heat outside. The air conditioner includes a window venting kit.

No permanent installation is needed. The unit is easy to move from room to room and offers a truly

ﬂexible air conditioning solution.

Auto Evaporation System - The unit automatically evaporates the condensate through the air

outlet hose. There is no need to empty the drainage tank except in very humid conditions.

Read and follow the instructions carefully.

•

Follow installation instructions to set up the unit.

Plug the unit into a properly grounded circuit. DO NOT plug into an extension cord.

USER TIPS

To ensure optimal efﬁciency of the product, keep doors and windows closed when it is used as an air

conditioner or dehumidiﬁer. If the product is being used with the fan function only, an open window could

improve air circulation.

Cooling and Dehumidifying Operation Fan Operation

EN 1

READ AND SAVE THESE INSTRUCTIONS

Improper handling can cause serious damage to people and to the appliance.

WARNING:

•

DO NOT operate the unit with a damaged plug or loose wall outlet. If the power cord is damaged, it

must be replaced by the manufacturer or an authorized service agent.

DO NOT cover the air intake and exhaust when in use.

This appliance is not intended for use by children. Children should be supervised and should not play

on or around the appliance.

DO NOT place objects on or sit on the unit.

Always turn off and unplug the unit when cleaning or servicing.

If service is needed contact an authorized service agent.

Unplug the unit when stored or not in use.

DO NOT run the power cord under carpeting and rugs.

Use caution to prevent tripping on cord.

DO NOT use in areas where gasoline, paint or other ﬂammable goods are stored.

Basic safety precautions should always be followed when using electrical appliances.

This household appliance has been manufactured for use in domestic environments and should not

be used for other purposes.

Only use the installation kit provided to install this unit. DO NOT attempt to extend the exhaust hose or

install this unit using other methods other than that provided in this manual. Improper installation could

void any existing warranties. Contact Customer Support for assistance if required.

DO NOT use an extension cord with this unit.

SAFETY

PARTS DESCRIPTION

1) Control Panel

2) Air Outlet

3) Handle

4) Casters

5) Remote Control

6) Exhaust Hose Connector

EN 2

Lower Grill

Drain Tube

(For Continuous Drain)

Lower Rubber Drain Plug

(Air Conditioning Mode)

Power Supply Cord

12)

13)

14)

15)

Cord Winder

Upper Grill

Upper Air Filter

Upper Rubber Drain Plug

(Dehumidifying Mode)

Lower Air Filter

10)

11)

It is important that the installation instructions below are followed for successful installation of this

portable air conditioner. Please call Customer Support if you have any difﬁculties or queries regarding

these installation procedures.

1. Locate and snap the 2 half pieces of the Window Bracket Panel Adapter securely together. Install

onto the plastic hose by rotating anti-clockwise over the plastic hose. Install and rotate (anti-clock-

wise) the hose connector over the opposite end of the plastic hose. Ensure secure ﬁt on both ends.

2. Adjust the window bracket as per width or

height of your window and insert the plastic

pin to ﬁx at the desired position. There is a

hole where the Plastic Hose will be inserted

later. Make sure this hole is not blocked.

3. Connect the plastic hose to the hose

connector on back of the unit.

Slide-in the

hose connector downwards until it is locked

in place.

4. Connect the window bracket to the window

bracket panel adapter. Ensure that all

connections are tight and installed properly.

Note:

After setting the window bracket to the size of your

window, please remove it from the window and

follow the instructions below.

INSTALLATION

Window Bracket Kit.............................

Window Bracket Panel Adapter..........

Plastic Pin............................................

Hose Connector..................................

Plastic Hose........................................

Drain Tube (refer to Continuous

Draining for Dehumidiﬁer Mode)..........

Installation

Kit:

Installation Steps:

1 Set

2 Half Pieces

1 Piece

Plastic Pin

Hole for Window Bracket

Panel Adapter & Plastic Hose

26.6", 33.1" to 49.6"

(67.5cm, 84cm to 126cm)

5. Connect the window bracket to the window.

6. The Portable Air Conditioner is now ready to use.

EN 3

Plastic Hose:

Dia. 5.9" (15cm)

Length: 14.2" to 47.2" (36cm to 120cm)

COOL

DRY

FAN

POWER

TIMER

SLEEP

WATER

FULL

HIGH

MID

LOW

TIMER

SLEEP

COOL

DRY

FAN

POWER

TIMER

SLEEP

WATER

FULL

HIGH

MID

LOW

TIMER

SLEEP

x 2

x 1

x 1 x 1

x 1

INSTALLATION (CONTINUED)

IMPORTANT:

• Do not replace or lengthen the exhaust hose as this could cause the unit to malfunction.

WARNING: Any warranties included with this product will be voided if an extra extension hose is added

to the originally provided installation kit or if the installation is performed differently than the manufactur-

er's instructions, without proper consultation. Please contact Customer Support for help with installation

if needed.

•

The supplied exhaust hose has a diameter of 5.9 inches (15 cm) and can be extended from 14.2

inches to 47.2 inches (36 cm to 120 cm).

Do not bend (to the extent shown below) the exhaust hose. A bent hose will block exhaust air and

cause the unit to malfunction or shut-off.

Make sure the back of the unit is at least 50 cm / 20 inches away from the wall. Do not place the unit

in front of curtains or drapes as this could obstruct the airﬂow.

USE & OPERATION

CONTROL PANEL

(1) Power Control

(2) Indicator Lights

(3) Timer Control / Sleep Control

(4) Timer / Temperature Set Controls

(5) Mode Control

(6) Fan Speed Control

Model with Heat Mode

Model without Heat Mode

FUNCTION BUTTONS

EN 4

MIN 55.5 cm

50 cm / 20”

RECOMMENDEDNOT RECOMMENDED

(6) (4)(5) (1)(2)(3)

COOL

DRY

FAN

POWER

TIMER

SLEEP

WATER

FULL

HIGH

MID

LOW

TIMER

SLEEP

COOL

DRY

FAN

HEAT

POWER

TIMER

SLEEP

WATER

FULL

HIGH

MID

LOW

TIMER

SLEEP

POWER CONTROL

The Power Control turns the unit on and off. When the unit is plugged into an appropriate electrical

outlet, the POWER indicator light will illuminate red indicating the unit is in a Standby Mode, ready to be

switched on at anytime. The air vent will automatically open when the unit is turned ON and automatical-

ly close when unit is turned OFF.

MIN. 55.5 cm / 22”

MAX. 110 cm / 43”

USE & OPERATION (CONTINUED)

MODE CONTROL

Settings: COOL, DRY, FAN and HEAT*. The corresponding indicator light will illuminate to indicate the

current mode setting.

FUNCTION BUTTONS (CONTINUED)

EN 5

•

Air Conditioning Mode (COOL)

Adjust fan speed and air temperature to suit your desired comfort level. Temperature setting range is 16°C -

32°C (61°F - 89°F).

Dehumidifying Mode (DRY)

Fan speed is preset to LOW.

Note: If the unit will be used mainly as a dehumidiﬁer, do not connect the exhaust hose. Continuous

drainage is then necessary (refer to Continuous Draining for Dehumidiﬁer Mode).

Fan Mode (FAN)

For air circulation without air conditioner cooling.

Heating Mode (HEAT)*

In this mode, the desired temperature can be set between 16°C - 32°C (61°F - 89°F). When in heating

mode condensation must be drained from the lower drain plug.

Note: The air exchange hose must vent outside the room when using heating mode.

Sleep Mode (SLEEP)

When the Sleep Mode is activated in Air Conditioning mode, the set temperature will increase by 1°F or 1°C

after the ﬁrst hour of cooling and will increase a further 1°F or 1°C after the second hour of cooling. The unit

will maintain this temperature for 5 hours. The set temperature will then reduce by 1°F or 1°C on the seventh

hour and reduce a further 1°F or 1°C on the tenth hour. Sleep mode will then deactivate automatically.

In Heating Mode*, the set temperature will reduce by 2°F or 2°C after the ﬁrst hour of heating* and will

reduce a further 2°F or 2°C after the second hour of heating*. The unit maintains heating* at this temperature

for 5 hours. Then, the set temperature will increase 2°F or 2°C at the seventh hour and will increase a

further 2°F or 2°C on the tenth hour. Sleep mode will then deactivate automatically.

Note: The Sleep Mode can be deactivated during cooling or heating* mode by pressing any button at any

time.

*Applicable for models with Heating feature only.

FAN SPEED CONTROL

3 settings: High, Medium and Low.

TIMER CONTROL

The Timer is adjustable between 1 - 24 hours.

AUTO TURN OFF:

While unit is running, press the TIMER button and the display will ﬂash. While the display is ﬂashing,

press the + or - button to select the number of hours you want the unit to turn OFF automatically.

AUTO TURN ON:

When unit is in a standby mode (plugged in with power light on), press the TIMER button and the display

will ﬂash. While the display is ﬂashing, press the + or - button to select the number of hours until you

want the unit to turn ON automatically.

TEMPERATURE CONTROL

WATER FULL LIGHT

Condensation may accumulate in the unit. If the bottom internal tank is 50% full, the WATER FULL light

will illuminate. If the bottom internal tank is 100% full, an alarm will beep for 30 seconds. The unit will

not operate until the water has been drained from the bottom drain plug (refer to Water Condensa-

tion Drainage).

After switching the air conditioner off, the compressor will not start immediately. You must

wait about 3 minutes before it switches back on again.

•

Used for adjusting the timer and thermostat.

The default display is room temperature.

In cooling mode, when + or - button is pressed, the set temperature is displayed and may be

adjusted. After 5 seconds the display will revert back to room temperature.

Note: By pressing both + / - buttons at the same time, the display will toggle between Celsius and

Fahrenheit.

USE & OPERATION (CONTINUED)

FUNCTION BUTTONS (CONTINUED)

EN 6

REMOTE CONTROL

The functions work the same as the portable air conditioner's Control Panel.

All key functions can be accessed from the remote control.

USE & OPERATION (CONTINUED)

•

Used for adjusting the timer and temperature

When the ▼or ▲key is pressed, the set

temperature is displayed and may be adjusted.

After 5 seconds the display will revert back to

room temperature

Timer setting is from 1-24 hours by pressing

the ▼or ▲keys

Press this button to change the

operation mode

ON / OFF

• HIGH • MID • LOW

In running mode: Auto switch OFF

In stand-by mode: Auto switch ON

Press ▼or ▲button to adjust the

time setting for 1 hour intervals

Temperature / Timer Set

Mode Control

Power Control

Fan Speed Control

Sleep Control

Timer Control

Battery Installation: Remove the cover on the back of the remote control and insert two AAA batteries

with + and - pointing in the proper direction according to the polarity markings.

Use only two AAA or IEC R03 1.5V batteries.

Remove the batteries if the remote control is not in use for a month or longer.

All batteries should be replaced at the same time, do not mix with old batteries.

Properly dispose of used batteries.

•

Note:

Caution:

COOL DRY

HEAT*

EN 7

FAN

*Applicable for models with Heating feature only.

This device complies with part 15 of the FCC Rules. Operation is subject to following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV technician for help.

Caution: Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate

the equipment.

CLEANING & MAINTENANCE

Appliance Maintenance:

Air Filter Maintenance:

The air ﬁlter is to be cleaned every two weeks to maintain a cleaner environment and air cooling

efﬁciency. Please follow the below instructions for cleaning the air ﬁlters:

WARNING: DO NOT power or operate the Air Conditioner when cleaning or when any or both of the

Rear Grills are removed from the unit, or if there is a loose-ﬁtting Rear Grill(s). DO NOT attempt to handle

or touch any of the parts or wiring inside the air conditioner after the Rear Grill(s) are removed from the

unit. Doing so can cause serious injury or electrical shock.

Turn off the appliance before disconnecting the power supply.

Only clean the appliance with a soft dry cloth.

Switch off and unplug the air conditioner from the electrical outlet.

Remove the Upper Filter/Grill and unscrew the Lower Filter/Grill and carefully remove.

Gently wash using water and/or diluted liquid dishwashing detergent. Rinse thoroughly and gently

shake excess water from the ﬁlters.

Make sure the ﬁlters are dry before reinstalling.

Note: You may use a vacuum cleaner to remove dust.

Replace the Upper Grill onto the unit, and reinstall the Lower Grill with the screws.

End of Season Storage & Maintenance:

If the appliance will not be used for a long time:

Be sure to drain the left-over water condensation. Remove the lower drain plug and use a

shallow pan to collect the water (make sure to replace the drain plug when ﬁnished).

To dry excess moisture, run the unit in Fan only mode for 30 minutes before storing.

Turn off and unplug the air conditioner from the power supply.

Remove the air ﬁlter and clean with water. Dry the air ﬁlter and then reinstall.

Disconnect the Window Installation Kit:

Cover the air conditioner with a cloth/ plastic bag before storage, to protect from dust and scratches.

It is recommended to coil the power cord before storing to ensure the cord is protected from bents

and creases.

Store the air conditioner in a cool, dry place, away from direct sunlight.

Remove the Plastic Hose from the unit.

Remove the Window Bracket, Window Bracket Panel Adapter and Hose Connector.

It is recommended to store the Window Kit parts in a bag together with the Remote Control and

placing them together with the air conditioner unit.

If needed, you can clean the Window Kit with a damp cloth and water before storing. Make sure all

parts of the Window Kit are dry before storage.

•

EN 8

WATER CONDENSATION DRAINAGE

When there is excess water condensation inside the unit, the air conditioner stops running and shows a

warning light (the WATER FULL indicator illuminates with a red light). This indicates that the water

condensation needs to be drained using the following procedures:

Manual Draining for Cooling, Heating & Dehumidiﬁer Mode

Water may need to be drained in high humidity areas.

Continuous Draining for Dehumidiﬁer Mode

While using the unit in dehumidiﬁer mode, continuous

drainage is recommended.

WATER CONDENSATION DRAINAGE

Unplug the unit from power source.

Place a shallow pan under the lower rubber drain plug.

See diagram.

Remove the rubber drain plug.

Water will drain out and collect in the shallow pan.

After the water is drained, replace the rubber drain plug.

You can now turn on the unit.

Unplug the unit from the power source.

Remove the upper/lower rubber drain plug. Some

residual water may spill so please have a pan to

collect the water.

Connect the drain tube (included) to the upper or

lower drain (whichever is more convenient for your

space). See diagram.

The water can be continuously drained through the

drain tube into a ﬂoor drain or bucket.

Replace the drain plug.

You can now turn on the unit.

EN 9

Lower

Rubber Drain

Plug

Shallow Pan

(Not included)

Drain Tube (included):

Dia. 0.09" (0.22cm)

Length: 29.3" (74.5cm)

Upper Rubber Drain Plug

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Klimaanlage Handbücher

Honeywell

Honeywell CO301PC Bedienungsanleitung

Honeywell

Honeywell CL30XC Bedienungsanleitung

Honeywell

Honeywell CS04XE Bedienungsanleitung

Honeywell

Honeywell ES800 Bedienungsanleitung

Honeywell

Honeywell HT09CESAWK Bedienungsanleitung

Honeywell

Honeywell MN14 Series Bedienungsanleitung

Honeywell

Honeywell HN Series Bedienungsanleitung

Honeywell

Honeywell AMH-10000E Bedienungsanleitung

Honeywell

Honeywell CS071AE Bedienungsanleitung

Honeywell

Honeywell CL25AE Bedienungsanleitung

Honeywell

Honeywell HJ Series Bedienungsanleitung

Honeywell

Honeywell CL30XC Bedienungsanleitung

Honeywell

Honeywell TC30PCE Bedienungsanleitung

Honeywell

Honeywell HM2CESSWK8 Bedienungsanleitung

Honeywell

Honeywell CL20AE Bedienungsanleitung

Honeywell

Honeywell MM14CCS Bedienungsanleitung

Honeywell

Honeywell CO301PC Bedienungsanleitung

Honeywell

Honeywell CS10XE Series Bedienungsanleitung

Honeywell

Honeywell HM0CESAWK6 Bedienungsanleitung

Honeywell

Honeywell HM Series Bedienungsanleitung

Honeywell

Honeywell CL610PE Bedienungsanleitung

Honeywell

Honeywell CS10XE Series Bedienungsanleitung

Honeywell

Honeywell HG Series Bedienungsanleitung

Honeywell

Honeywell CL25AE Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung