Honeywell Hometronic HB 05 Bedienungsanleitung

Sun Module

HB 05 / HB 15

Mounting and Operation

Contents

Contents 1

Overview 2

For your information 2

Application 2

Scope of supply 4

Mounting 5

Safety instructions 5

Information on mounting the sun module 5

Information on mounting external sensors 6

Mounting the sun module 7

Inserting batteries 8

Mounting external sensors 9

Teach-in 12

Operation 16

Information for the fitter 16

Glossary 17

Technical data 18

Help for problems 19

Notes 21

Overview

For your information

Technical terms are identified by an * and are explained in the

glossary.

Application

The Sun module HB 05/HB 15 is part of the Hometronic System*. It

measures the brightness and temperature outside a building. The

housing of the sun module contains:

•1 sensor for measuring the brightness

•1 sensor for measuring the temperature

The measuring data* are transferred by radio to the Hometronic

Manager*. These data are used by the Hometronic Manager to control

the shutters which are assigned to the sun module via the following

functions:

•Opening the shutters at sunrise (SR)

•Sun protection (SP) in case of intensive sunshine and depending on

the outside temperature

•Closing the shutters at sunset (SS)

•Automatic brightness control (HA) for controlling the lamp

brightness via brightness values of the HB 05/HB 15 or controlling a

device with the device switch HS 20 or HS 30.

Overview

•In the case of Version HB 15 with a connected vane anemometer*:

Opening or closing the shutters depending on the wind forces (wind

protection*)

Use the wind sensor HWS 40 to control the awnings.

You can connect further external sensors to the sun module:

•A temperature sensor to the HB 05 (alternatively to the temperature

sensor in the housing)

•A temperature sensor and a vane anemometer to the HB 15

Overview

Scope of supply

(1) Sun module

(2) Mounting bracket

(3) 2 batteries 1.5 V, type LR 06

(mignon)

Additionally in the Sun

module HB 15 scope of suppl

(4) Connection cable (HCV 23)

(5) Vane anemometer

Mounting

Safety instructions

Caution!

The sun module has a radio transmitter whose function

can be impaired by metallic objects or radio devices.

►When selecting the mounting site, ensure that there is

sufficient distance to metallic objects and radio

devices.

►Select a different mounting site if radio interference

occurs.

Caution!

The brightness and temperature sensors in the inside of

the module have been adapted to the housing state.

►Do not coat the housing.

►Avoid rough damage to the housing.

Information on mounting the sun module

When selecting the mounting site, ensure that ...

•the sun module is easily accessible for the teach in* and the battery

change

•the brightness situation at the building is determined unimpaired as

far as possible

Mounting

If you only install one sun module, select the mounting site in

accordance with its main application: Your Hometronic Manager uses

the measured data to control e.g. the position of the shutters at

sunrise or sunset. For measured data ...

•at sunrise: Align the sun module to face East

•at sunset: Align the sun module to face West

•for the whole day: Align the sun module to face South

Information on mounting external sensors

In order to connect external sensors you require:

(1), (2) Cable from the distribution box to the external sensors

(3) Damp-proof distribution box

(4) Connection cable (HCV 23) to the sun module

Mounting

When selecting the mounting site, ensure that ...

•the function of the external sensors is not impaired by an unsuitable

mounting site

•the external temperature sensor is not subject to direct sun

irradiation

•the wind conditions at the vane anemometer correspond to those at

the assigned shutters

•the vane anemometer is not positioned sheltered from the wind

Mounting the sun module

1. Mounting the mounting bracket

The metallic mounting bracket supports the function of the radio

transmitter.

When mounting the unit, ensure that the horizontal screw

hole of the mounting bracket is positioned at the top.

►Select a suitable mounting site.

►Use suitable screws and dowels to fasten the

mounting bracket firmly to the underground.

Mounting

Inserting batteries

►If necessary, take the sun module out

of the mounting bracket.

►Open the battery compartment:

–Press in the battery lid.

–Pull up the housing frame.

–Remove the battery lid.

►Remove the old batteries, if necessa-

ry.

Batteries should not be disposed of in the household garbage.

You may be required by local law to dispose of used batteries

in a certain manner.

►Dispose of used batteries in conformance with the local statutory

requirements.

Always replace both batteries.

Only use 1.5 V mignon batteries of the type LR06.

►Insert the batteries into the battery compartment. Ensure that the

polarity is correct!

►Close the battery compartment and insert the sun module into the

mounting bracket.

Mounting of the sun module is now complete.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Steuereinheit Handbücher

Honeywell

Honeywell LTE-L57A Bedienungsanleitung

Honeywell

Honeywell VC Series Bedienungsanleitung

Honeywell

Honeywell Fire-Lite ANN-LC Bedienungsanleitung

Honeywell

Honeywell ADEMCO VA8201 Montageanleitung

Honeywell

Honeywell Kromschroder GIK Series Bedienungsanleitung

Honeywell

Honeywell S8600 Bedienungsanleitung

Honeywell

Honeywell Hometronic HAV 20 Leitfaden

Honeywell

Honeywell SK-Mon-10 Bedienungsanleitung

Honeywell

Honeywell MCV2000AA Montageanleitung

Honeywell

Honeywell MK VI Handbuch

Honeywell

Honeywell Elster Jeavons S300 Bedienungsanleitung

Honeywell

Honeywell 2MLF-HO2A Bedienungsanleitung

Honeywell

Honeywell PW6K1R1E Bedienerhandbuch

Honeywell

Honeywell MDC108200 Bedienungsanleitung

Honeywell

Honeywell TR120 Bedienungsanleitung

Honeywell

Honeywell S89E Bedienungsanleitung

Honeywell

Honeywell SM152 Series Bedienungsanleitung

Honeywell

Honeywell WV8840B Bedienungsanleitung

Honeywell

Honeywell DirectConnect AMX300 Bedienungsanleitung

Honeywell

Honeywell FY 30 Bedienungsanleitung

Honeywell

Honeywell Notifier FCM-1 Bedienungsanleitung

Honeywell

Honeywell Esser 2 Series Bedienungsanleitung

Honeywell

Honeywell V5421C Bedienungsanleitung

Honeywell

Honeywell GSMVLP5-4G Montageanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung