Honeywell PRO32IN Bedienungsanleitung

PRO3200

(PRO32IN)

Input Module

Installation Guide

All product and brand names are the service marks, trademarks, registered trademarks, or registered

service marks of their respective owners. Printed in the United States of America. Honeywell reserves the

right to change any information in this document at any time without prior notice.

WIN-PAK® is a trademark of Honeywell International, Inc.

Ordering Information

Please contact your local Honeywell representative or visit us on the web at www.honeywellaccess.com

for information about ordering.

Feedback

Honeywell appreciates your comments about this manual. Please visit us on the web at

www.honeywellaccess.com to post your comments.

PRO3200 Input Module, Installation Guide, Document 800-15462 iii

CONTENTS

Notices

Warnings and Cautions.................................................................................................... . . . . . . . . . . v

Disclaimer.......................................................................................................................... . . . . . . . . . . vi

Compliance........................................................................................................................ . . . . . . . . . vii

Unpacking Procedure....................................................................................................... . . . . . . . . . vii

Shipping Instructions ....................................................................................................... . . . . . . . . . viii

Limited Warranty ............................................................................................................. . . . . . . . . . . ix

Confidentiality .................................................................................................................. . . . . . . . . . . ix

Installing the PRO3200 Input Module

Description ........................................................................................................................ . . . . . . . . . . 1

Specification...................................................................................................................... . . . . . . . . . . 1

Set Up................................................................................................................................. . . . . . . . . . . 2

LED Operation.................................................................................................................. . . . . . . . . . . 4

Power.................................................................................................................................. . . . . . . . . . . 6

Communications............................................................................................................... . . . . . . . . . . 6

Wiring ................................................................................................................................. . . . . . . . . . 7

Alarm Contact Wiring........................................................................................ . . . . . . . . . . 7

Control Output Wiring....................................................................................... . . . . . . . . . . 7

Mounting Options............................................................................................................. . . . . . . . . . . 8

Installing the Module ....................................................................................................... . . . . . . . . . . 8

Wiring Diagram for Connectors 1 through 12............................................................. . . . . . . . . . . 9

Wiring Diagram for Connectors 10 through 12........................................................... . . . . . . . . . 10

iv www.honeywell.com

(This page is left blank intentionally for double-sided printing.)

PRO3200 Input Module, Installation Guide, Document 800-15462 v

Notices

Warnings and Cautions

Warning

Before installation, TURN OFF the external circuit breaker which supplies power to the

system.

Before connecting the device to the power supply, verify that the output voltage is

within specifications of the power supply.

Do not apply power to the system until after the installation has been completed.

Personal injury or death could occur, and the equipment could be damaged beyond

repair, if this precaution is not observed!

Warning: Fire Safety and Liability Notice

Never connect card readers to any critical entry, exit door, barrier, elevator, or gate

without providing an alternative exit in accordance with all fire and life safety codes

pertinent to the installation. These fire and safety codes vary from city to city and you

must get approval from local fire officials whenever using an electronic product to

control a door or other barrier. Use of egress buttons, for example, may be illegal in

some cities. In most applications, single action exit without prior knowledge of what

to do is a life safety requirement. Always make certain that any required approvals are

obtained in writing. DO NOT ACCEPT VERBAL APPROVALS, BECAUSE THEY

ARE NOT VALID.

Honeywell never recommends using the PRO3200 or related products for use as a

primary warning or monitoring system. Primary warning or monitoring systems

should always meet local fire and safety code requirements. The installer must also

test the system on a regular basis by instructing the end user in appropriate daily

testing procedures. Failure to test a system regularly could make the installer liable for

damages to the end user if a problem occurs.

Note: See the Remote Enclosure Installation manuals PRO22ENC1, PRO22ENC2,

PRO22ENC3 or PRO22ENC5 for installation instructions.

Warning:

EARTH ground all enclosures for proper installation.

Warning:

Use suppressors on all door strikes. Use S-4 suppressors for installation. Honeywell

recommends only DC strikes.

Notices

Disclaimer

vi www.honeywell.com

Warning for UL Installations:

• Wiring methods shall be in accordance with the National Electrical Code

(ANSI/NFPA70).

• All interconnecting devices must be UL Listed.

• Not Evaluated by UL for fire, life safety, or burglary applications.

• Do Not Connect To A Receptacle Controlled By A Switch.

• All interconnecting wire must be UL/ULC Listed, rated and suitable for the

use.

Caution:

IF ANY DAMAGE TO THE SHIPMENT IS NOTICED, A CLAIM MUST BE

FILED WITH THE COMMERCIAL CARRIER RESPONSIBLE.

Caution:

Electrostatic discharge can damage CMOS integrated circuits and modules. To

prevent damage, always follow these procedures:

• Use static shield packaging and containers to transport all electronic

components, including completed reader assemblies.

• Handle all ESD sensitive components at an approved static-controlled

workstation. These workstations consist of a desk mat, a floor mat, and an ESD

wrist strap. Workstations are available from various vendors.

Note: This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference, in which case the user will be required to correct the interference at his

own expense.

Note: This document and the data in it shall not be duplicated, used, or disclosed to

others for procurement or manufacture, except as authorized by and with the written

permission of, Honeywell, Inc. The information contained in this document or in the

product itself is considered the exclusive property and trade secrets of Honeywell, Inc.

software product itself.

Note: Any use of this product is subject to the terms and acceptance of the Honeywell,

Inc. Software Agreement. Please request a copy from Honeywell, Inc., and review the

agreement carefully.

Disclaimer

Product Liability; Mutual Indemnification

Notices

Compliance

PRO3200 Input Module, Installation Guide, Document 800-15462 vii

In the event that a Customer receives a claim that a Product or any component thereof

has caused personal injury or damage to property of others, Customer shall

immediately notify Honeywell in writing of all such claims. Honeywell shall defend

or settle such claims and shall indemnify and hold Customer harmless for any costs or

damages including reasonable attorneys' fees which Customer may be required to pay

as a result of the defective Product or the negligence of Honeywell, its agents, or its

employees.

Customer shall hold harmless and indemnify Honeywell from and against all claims,

demands, losses, and liability arising out of damage to property or injury to persons

occasioned by or in connection with the acts or omissions of Customer and its agents

and employees, and from and against all claims, demands, losses, and liability for

costs of fees, including reasonable attorneys' fees, in connection therewith.

Compliance

To obtain applicable EU compliance Declaration of Conformities for this product,

please refer to our website,

http://www.security.honeywell.com/hsce/international/index.html. For any additional

information regarding the compliance of this product to any EU-specific

requirements, please contact:

Honeywell Security & Communications

Honeywell Security - Quality Assurance Dept., Newhouse Industrial Estate

Motherwell

Lanarkshire ML1 5SB

Scotland

United Kingdom

Tel: +44)0) 1698 738200

Email: [email protected]

Unpacking Procedure

Caution:

If any damage to the shipment is noticed before unpacking, a claim must be filed with

the commercial carrier.

All containers should be opened and unpacked carefully in order to prevent damage to

the contents.

The following steps are used to unpack equipment in preparation for installation:

1. Open the container and remove the unit(s) and all packing material. Retain the

container and all packing materials. They may be used again for reshipment of

the equipment, if needed.

2. Inspect the contents for shortage. If items are missing items, contact the order

entry department at 800-323-4576.

3. Visually check contents. If damage is discovered, perform the following:

• If shipping caused damage to the unit, a claim must be filed with the

commercial carrier.

Notices

Unpacking Procedure

viii www.honeywell.com

• If any other defect is apparent, call for a return authorization.

Notices

Shipping Instructions

PRO3200 Input Module, Installation Guide, Document 800-15462 ix

Shipping Instructions

To ship equipment back to Honeywell, Inc.:

1. Contact the customer service department at 800-323-4576 before returning

equipment. When you call please have available:

• A description of the problem or reason you are returning the equipment.

• Your original purchase order number, invoice number and if the unit is

still under warranty.

• A new purchase order number if the unit is not under warranty.

2. From the customer service department, obtain the Return Authorization

Number (RMA).

3. Show the RMA number on all packages shipped. Packages which are not

marked with an RMA number will be refused at the factory and returned to

you COD.

4. Carefully pack the equipment for shipment. Use the original packing material

whenever possible.

Notices

Limited Warranty

xwww.honeywell.com

Limited Warranty

All Products sold or licensed by Honeywell include a warranty registration card which

must be completed and returned to Honeywell by or on behalf of the end user in order

for Honeywell to provide warranty service, repair, credit or exchange. All warranty

work shall be handled through Customer which shall notify Honeywell and apply for a

Return Merchandise Authorization (RMA) number prior to returning any Product for

service, repair, credit, or exchange. Honeywell warrants that its Products shall be free

from defects in materials and workmanship for a period of two years from date of

shipment of the Product to Customer. The warranty on Terminals, Printers,

Communications Products and Upgrade kits is 90 days from date of shipment.

Satisfaction of this warranty shall be limited to repair or replacement of Products

which are defective or defective under normal use. Honeywell's warranty shall not

extend to any Product which, upon examination, is determined to be defective as a

result of misuse, improper storage, incorrect installation, operation or maintenance,

alteration, modification, accident or unusual deterioration of the Product due to

physical environments in excess of the limits set forth in Product manuals. THERE

ARE NO WARRANTIES WHICH EXTEND BEYOND THIS PROVISION. THIS

WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES WHETHER EXPRESS,

IMPLIED OR STATUTORY, INCLUDING IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. NO

REPRESENTATION OR WARRANTY OF THE DISTRIBUTOR SHALL EXTEND

THE LIABILITY OR RESPONSIBILITY OF THE MANUFACTURER BEYOND

THE TERMS OF THIS PROVISION. IN NO EVENT SHALL HONEYWELL BE

LIABLE FOR ANY RE-PROCUREMENT COSTS, LOSS OF PROFITS, LOSS OF

USE, INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES TO ANY

PERSON RESULTING FROM THE USE OF HONEYWELL'S PRODUCTS.

Confidentiality

All software, drawings, diagrams, specifications, catalogs, literature, manuals and

other materials furnished by Honeywell relating to the design, use and service of the

Products shall remain confidential and shall constitute proprietary rights of Honeywell

and Customer agrees to treat such information as confidential. Customer shall acquire

no rights in the design of the Products or the related materials except to use such

information solely for the purpose of and only during the time it sells the Products.

Customer shall not copy the design of any of the Products or use or cause to be used

any Product design or related materials for its own benefit or for the benefit of any

other party. The covenants contained in this section shall remain effective throughout

the term of this Agreement and thereafter unless specifically waived by Honeywell in

writing.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Steuereinheit Handbücher

Honeywell

Honeywell CA295 Bedienungsanleitung

Honeywell

Honeywell ADEMCO 4204 Bedienungsanleitung

Honeywell

Honeywell R7284B Bedienungsanleitung

Honeywell

Honeywell BA295S Bedienungsanleitung

Honeywell

Honeywell XW100 Bedienungsanleitung

Honeywell

Honeywell FV300 Bedienungsanleitung

Honeywell

Honeywell NOTIFIER ASY-01-044-NIM Bedienungsanleitung

Honeywell

Honeywell FY 30 Bedienungsanleitung

Honeywell

Honeywell Braukmann T100A Bedienungsanleitung

Honeywell

Honeywell NK298S Bedienungsanleitung

Honeywell

Honeywell PRO4200 Bedienungsanleitung

Honeywell

Honeywell Kromschroder TC 1 Bedienungsanleitung

Honeywell

Honeywell D16 Bedienungsanleitung

Honeywell

Honeywell VF5000 Series Bedienungsanleitung

Honeywell

Honeywell 5496 Betriebsanleitung

Honeywell

Honeywell SM120 Bedienungsanleitung

Honeywell

Honeywell PM7600B Bedienungsanleitung

Honeywell

Honeywell HM700AFVALVE Bedienungsanleitung

Honeywell

Honeywell S7800A1001 Bedienungsanleitung

Honeywell

Honeywell FIRE-LITE ALARMS TS540/1 Bedienungsanleitung

Honeywell

Honeywell 7800 SERIES Bedienungsanleitung

Honeywell

Honeywell 7800 SERIES Bedienungsanleitung

Honeywell

Honeywell SG150 Bedienungsanleitung

Honeywell

Honeywell Notifier FMM-1 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung