Honeywell RK-MCU Merkblatt

M_2000060504_EN_1.0

INTEVIO-Master Control Unit

Product Instructions

Model：RK-MCU

M_2000061159_UL_1.1

Precautions

Danger

This sign reminds users of “dangerous voltage” on the

product.

Caution

This sign reminds users of important instructions

attached to the product.

Safety

guideline

In order to prevent electric shock, this equipment plug

shall not be used as conductor to extend power supply

line.

Do not block the equipment’s ventilation opening or put

other equipment on it.

Safety

guideline

Protect this equipment against rainwater or moisture so

as to avoid fire or electric shock.

Unpacking

After removing the amplifier from the carton, inspect for any exterior

damage to the unit. If damage is noted, notify the carrier at once so that a

claim can be justified. Save all packing material. This is important when

the claim is processed.

Ventilation

To offset heat generated by the unit, it is necessary to provide ample

ventilation around the unit. Avoid blocking or impeding the ventilation holes

on the unit. To prevent unnecessary problems, install the unit in a place

free from any vibrations, direct sunlight, humidity or dust circulation.

Prevent liquids or other materials to enter cabinet

If the unit gets wet or any foreign material enters the amplifier cabinet,

immediately disconnect the AC power cord and consult your dealer or

qualified technician.

Important Safety Instructions

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with a dry cloth.

Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

Do not install on or near any heat sources such as radiators, heat

registers, stoves or other apparatus (including amplifiers) that produce

heat.

Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly at

plugs, convenience receptacles, and the point where they exit from the

apparatus.

Only use the attachments/accessories specified by the manufacturer.

Use only with the cart, stand, tripod, bracket or

table specified by the manufacturer, or sold with

the apparatus. When a cart is used, use caution

when moving the cart/apparatus combination to

avoid injury from tip-over.

Unplug this apparatus during lightning storms or

when unused for long periods of time.

Refer all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way such as power

supply cord or plug is damaged, liquid has been spilled or objects have

fallen into the apparatus, the apparatus has been exposed to rain or

moisture, does not operate normally, or has been dropped.

Apparatus shall not be exposed to dripping or splashing and no objects

filled with liquids, such as vases, shall be placed on the apparatus.

WARNING –To reduce the risk of fire or electric shock, do not expose

this apparatus to rain or moisture.

The mains plug is used as disconnecting device and shall remain

readily operable.

The apparatus is unsuitable for use in air-handling spaces.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Network Security

Placement

Please put the device in a safe place, lock the cabinet and keep the

keys well.

The access control system of the central control room should be under

strict management.

Any person except authorized maintainer is forbidden to disassemble

or change parts of device.

It is forbidden to communicate X-618 system with third party system

unless updating the configuration.

Password Precaution

Please change the password during the system deployment.

Users need to change the password regularly.

The password with six numbers is preferred.

Product Overview

RK-MCU Master Control Unit is the central management device of the

INTEVIO PA system, which is used to manage and monitor all devices and

perform various operations. RK-MCU is integrated with audio storage,

broadcast, zone control, monitor, timing control, and fault diagnosis. Built-in

500W digital power amplifier can drive a maximum 8 loudspeaker zones to

meet requirements for small applications. It can also be connected to zone

expanders to increase system capacity for the requirements of large

applications as well.

Product Features

Manage all devices in the system, used for public address and

emergency broadcast.

View system status and set the parameters via LCD screen.

Supports both single channel mode and dual channel mode.

Maximum 8 loudspeaker zones can be connected, with a maximum

power rating of 500W for each zone.

Built-in 500W Class-D power amplifier.

Supports external power amplifiers.

Flexible power amplifier redundancy. One spare amplifier can back up

all amplifiers in the system.

Built-in 1GB Flash memory and 8GB SD card, which can be used to

store audio files, recording files, configuration data and log files, etc.

Two auxiliary inputs and one MIC/LINE input.

Optional PTT microphone used for live broadcast.

Digital volume control, easy to set input and output volume.

255 broadcast priorities can be set as required.

Built-in loudspeaker to monitor the audio signal of two channels.

Automatic recording and temporary recording.

Full system supervision, including main power supply, backup power

supply, CPU, PTT microphone, power amplifier, speaker lines, dry

contact inputs, network communication, etc.

10 dry contact inputs with supervision and 8 dry contact outputs.

Supports 3-wire and 4-wire volume controller.

Capable to be integrated with the third party system through dry

contact inputs.

Zone expanders can be connected to increase the system capacity.

Remote call stations can be connected for live broadcast and control.

Built-in standard configuration allows to be used directly after

installation.

Equipment configuration can be set or modified via configuration

software.

Function Introduction

Main/backup power supply

Zone control

Amplifier redundancy

Audio input & allocation

Digital volume control

Automatic/temporary recording

Monitor function

System supervision

Live broadcast

Business broadcast

Background music broadcast

Timing broadcast

System extension

DC power output

Fan control

Front Panel

No.

Button/Indicators

Description

Microphone bracket

The microphone bracket is used for PTT

microphone.

Emergency button

A protective cover is above the emergency

button to avoid wrong operation.

If switching to manual emergency mode,

raise the protection cover, then press the

button. Theindicator light turns red.

Microphone socket

and indicator light

The microphone socket is used to connect

PTT microphone to MCU.

The indicator light is off in standby mode.

When microphone is active, the light turns

green. When a fault is found, the light turns

orange.

Device status

indicator lights

To indicate status of device power, general

fault, CPU fault, ground fault, disabled status

etc.

VU meter

To indicate the signal level of internal power

amplifier.

LCD Display screen

To display system work status and set the

parameters

Wheel knob of

master volume

To adjust the output volume of audio channel

1(BGM) in public address.

No.

Button/Indicators

Description

Wheel knob of

Rotate left and right to navigate available

menu options. Push in to select.

Function button

Function buttons, including ALL, CLOSE,

MONITOR, TEST, RECORD, RESET, ACK,

HOME, etc.

Zone button &

status indicator light

8 zones/groups buttons with status indicator

lights, which can be configured as needed.

Audio source button

& status indicator

light

8 audio source selection buttons and status

indicator lights, which can be configured as

needed.

Rear Panel

No.

Parts/Ports

Description

Audio output of CH1

Output signal of channel 1. It can be

connect to external power amplifier or third

party devices.

Audio output of CH2

Output signal of channel 2. It can be

connect to external power amplifier or third

party devices.

Inhaltsverzeichnis

Andere Honeywell Steuereinheit Handbücher

Honeywell

Honeywell V48F Bedienungsanleitung

Honeywell

Honeywell V5197A1011 Bedienungsanleitung

Honeywell

Honeywell RMG 213 Leitfaden

Honeywell

Honeywell Esser 2 Series Bedienungsanleitung

Honeywell

Honeywell Esser IQ8TAL Bedienungsanleitung

Honeywell

Honeywell AlarmNet GSMBR Montageanleitung

Honeywell

Honeywell Esser 8044 Series Bedienungsanleitung

Honeywell

Honeywell BCU 370 Handbuch

Honeywell

Honeywell FIRE-LITE ALARMS TS540/1 Bedienungsanleitung

Honeywell

Honeywell BSM Montageanleitung

Honeywell

Honeywell SG150 Bedienungsanleitung

Honeywell

Honeywell D16 Bedienungsanleitung

Honeywell

Honeywell 4232CBM Montageanleitung

Honeywell

Honeywell BA298I-F Bedienungsanleitung

Honeywell

Honeywell 7800 SERIES Bedienungsanleitung

Honeywell

Honeywell DS05 Bedienungsanleitung

Honeywell

Honeywell D06F Bedienungsanleitung

Honeywell

Honeywell Silent knight 5895XL Betriebsanleitung

Honeywell

Honeywell VGF21 Bedienungsanleitung

Honeywell

Honeywell VR400 Series Bedienungsanleitung

Honeywell

Honeywell SILENT KNIGHT Farenhyt Series Bedienungsanleitung

Honeywell

Honeywell JADE W7220 Bedienungsanleitung

Honeywell

Honeywell V5097A-E Bedienungsanleitung

Honeywell

Honeywell 2MLL-PMEC Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung