Honeywell Dolphin 70e Black Bedienungsanleitung

Dolphin™ 70e Black

with Windows®Embedded Handheld 6.5

Quick Start Guide

70E-WEH-QS Rev B

6/13

Out of the Box

Verify that your carton contains the following items:

• Dolphin 70e Black mobile computer (terminal)

• Rechargeable 3.7V Li-ion Battery

• USB charge/communication cable

• Power adapter with regional plug adapters

• Quick Start Guide

• Compliance Regulatory Sheet

If you ordered accessories for your terminal, verify that they are also included

with the order. Be sure to keep the original packaging in case you need to

return the Dolphin terminal for service.

Note: Your Dolphin model may differ from the model illustrated in this guide;

however, the features noted are standard for all Dolphin 70e Black models

with Windows Embedded Handheld unless otherwise indicated.

Getting to Know the Dolphin 70e Black

Front

Microphone*

Scan Button

General Notification LED

Right Scan/

Image Button

USB Door/

Micro USB

Port

End Button

Home Button

Side

Microphone*

Send Button

Back Button

WAN Notification

LED

Front Speaker

Touch Panel

Display

Bottom Speaker

*Important - Do not cover the side microphone with your

hand when using the terminal for phone calls or audio

recordings. Both the front and side microphones must

be free from obstruction for the noise cancellation

feature to function.

Camera

Flash/

Flashlight

Color

Camera

Lens

I/O Connector

Battery Door

(standard model shown)

Volume Control Button

Left Scan/Image Button

Power Button

Audio Jack

Image Engine Window (LED aperture)

Battery Latch and Retention Strap

(battery and battery door not shown)

SIM Card Socket

Memory Card Socket

Memory Card Retention Flap

SIM Card

Retention Flap

SIM Card Socket

Installing the Battery

Dolphin 70e Black model terminals are designed for use with battery part

numbers BAT-STANDARD-01 (Li-ion 3.7 V, 6.179 watt hour) and

BAT-EXTENDED-01 (Li-ion 3.7 V, 12.358 watt hour) manufactured for

Honeywell International Inc.

The Dolphin 70e Black is shipped with the battery packaged separately from

the terminal. Perform the steps illustrated below to install the battery.

Ensure all components are dry prior to placing the battery in the

terminal. Mating wet components may cause damage not covered by

the warranty.

Note: Standard model battery

and battery door shown.

We recommend use of Honeywell Li-ion battery packs. Use of any non-

Honeywell battery may result in damage not covered by the warranty.

Once the battery is installed, connect the terminal to one of the Dolphin 70e

Black charging peripherals to charge the battery.

Charging the Dolphin 70e Black

Dolphin terminals ship with the battery significantly discharged of power.

Charge the battery with a Dolphin charging device for a minimum of 4 hours

for the standard battery and 6 hours for the extended battery. When using the

70e-USB Charge/Communication cable to charge from a 500mA USB port on

a host device, charge the battery for a minimum of 6 hours for the standard

battery and 8 hours for the extended battery.

Note: Using the terminal while charging the battery significantly increases the time

required to reach a full charge.

We recommend use of Honeywell peripherals, power cables, and power

adapters. Use of any non-Honeywell peripherals, cables, or power

adapters may cause damage not covered by the warranty.

Dolphin 70e Black model terminals are designed for use with the following

charging devices and cables: 70e-HB, 70e-CB, 70e-MB, 70e-MC, and the

70e-USB ADAPTERKIT.

Ensure all components are dry prior to mating terminals/batteries with

peripheral devices. Mating wet components may cause damage not

covered by the warranty.

HomeBase (Model 70e-HB)

The 70e-HB charger is designed for use with Dolphin 70e Black model

terminals, and battery part numbers BAT-STANDARD-01 (Li-ion 3.7V, 6.179

watt hour) and BAT-EXTENDED-01 (Li-ion 3.7V, 12.358 watt hour)

manufactured for Honeywell International Inc.

Use only a UL Listed power supply, which has been qualified by Honeywell

with output rated at 12VDC and 3 amps with the device.

HomeBase Parts

HomeBase LED Indicators

AUX battery LED

Orange The auxiliary battery is charging.

Green The auxiliary battery has completed charging and is ready

for use.

Dock LED

Blue The terminal is properly seated in the base.

COMM LED

Green A USB connection is established with the host workstation.

AUX Battery Well

AUX

Battery LED

COMM LED

Dock LED

AC Power Cord

USB Port

DC Power

Jack

Power Adapter

Power Cable

USB Charge/Communication Cable (70e-USB ADAPTERKIT)

The USB Charge/Communication cable provides two options for charging the

terminal. Use the cable in conjunction with the provided power supply adapter

and plug adapter to charge the terminal from a power outlet or connect the

cable to a high-power USB port to charge from a host device.

Option 1: Charging from a power outlet

Use only a UL Listed power supply, which has been qualified by Honeywell

with an output rated at 5VDC and 1A with the device.

Option 2: Charging from a high-power USB port on a host device

Note: Charging the battery through a USB port takes more time than direct AC

adapter charging. USB charging will not take place if the terminal is drawing

more current than supplied by the USB port.

Touch > Settings > System > Power to verify the battery is charging.

Power

Adapter

Micro

USB Port

USB Door

Plug Adapter

70e-USB Charge/

Communication Cable

Micro USB

Port

USB

Door

Host Device

USB Port

70e-USB Charge/

Communication Cable

Turning Power On/Off

To turn the terminal On, press and release the Power button .

To turn the terminal Off:

1. Press and hold the Power button for approximately 4 seconds until

the options menu displays.

2. Touch Power off.

Suspend Mode

Suspend mode automatically turns the touch screen off to save battery power

when the terminal is inactive for a programmed period of time. The automatic

timeout limits are adjustable from the Advance tab located under Settings >

System > Power.

Press and release the Power button to toggle the terminal in or out of

Suspend Mode.

Note: You should always place the terminal into Suspend mode before removing

the battery.

Removing the Battery

1. Place the terminal in Suspend mode.

2. Perform the steps illustrated below to remove the battery.

Installing the SIM Card and/or Memory Card

Honeywell recommends the use of Single Level Cell (SLC) industrial grade

microSD™ or microSDHC™ memory cards with Dolphin terminals for

maximum performance and durability. Contact a Honeywell sales

representative for additional information on qualified memory card options.

To install the SIM Card and/or Memory Card:

1. Place the terminal in Suspend mode.

2. Remove the battery door and battery.

3. Lift the card retention flap for the appropriate socket.

4. Slide the SIM or memory card (contacts facing down) into the socket,

then close the retention flap.

Note: Format microSD/SDHC card before initial use.

5. Install the battery and battery door. The terminal begins booting as soon

as power is applied.

Memory Card

Retention Flap

SIM Card

Retention Flap

Chamfered

Corner of

SIM Card

Andere Handbücher für Dolphin 70e Black

Inhaltsverzeichnis

Andere Honeywell Handheld Handbücher

Honeywell

Honeywell ScanPal EDA51 Bedienungsanleitung

Honeywell

Honeywell Dolphin CN85 Bedienungsanleitung

Honeywell

Honeywell 9900LUP-6211G0 - Hand Held Products Dolphin... Bedienungsanleitung

Honeywell

Honeywell CT50 Bedienungsanleitung

Honeywell

Honeywell Dolphin 75e Bedienungsanleitung

Honeywell

Honeywell MX7 Tecton Bedienungsanleitung

Honeywell

Honeywell 7600BG-122-B4EE - Hand Held Products Dolphin... Bedienungsanleitung

Honeywell

Honeywell Dolphin 7600 Bedienungsanleitung

Honeywell

Honeywell MX9 Bedienungsanleitung

Honeywell

Honeywell CT50 Bedienungsanleitung

Honeywell

Honeywell Dolphin 99EXLG Series Bedienungsanleitung

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell Optimus 5100 Bedienungsanleitung

Honeywell

Honeywell ScanPal Series Bedienungsanleitung

Honeywell

Honeywell CT60LON Bedienungsanleitung

Honeywell

Honeywell CN70 Series Bedienungsanleitung

Honeywell

Honeywell MX3PLUS Bedienungsanleitung

Honeywell

Honeywell MX3PLUS Bedienungsanleitung

Honeywell

Honeywell HX2 Bedienungsanleitung

Honeywell

Honeywell Dolphin 60s Bedienungsanleitung

Honeywell

Honeywell CT50 Bedienungsanleitung

Honeywell

Honeywell Marathon Betriebsanleitung

Honeywell

Honeywell Dolphin 75e Bedienungsanleitung

Honeywell

Honeywell Dolphin 7850 Bedienungsanleitung

Beliebte Handheld Handbücher anderer Marken

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung

Palm

Palm Tungsten E2 Handbuch

Alien

Alien ALR-H460 Bedienungsanleitung

ViewSonic

ViewSonic Pocket PC V36 Bedienungsanleitung

Cingular

Cingular 8125 Bedienungsanleitung

Intermec

Intermec CK30 Bedienungsanleitung