Honeywell HX3 Bedienungsanleitung

HX3

Wearable Computer

Microsoft® Windows® CE 5 Operating System

User's Guide

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this

document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have

been made. The information in this publication does not represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages

resulting from the furnishing, performance, or use of this material.

This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document

may be photocopied, reproduced, or translated into another language without the prior written consent of HII.

Web Address: www.honeywellaidc.com

Microsoft®Windows, ActiveSync®, MSN, Outlook®, Windows Mobile®, the Windows logo, and Windows Media are

registered trademarks or trademarks of Microsoft Corporation.

Intel®and Intel XScale®are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States

and other countries.

Summit Data Communications, the Laird Technologies Logo, the Summit logo, and "Connected. No Matter What" are

trademarks of Laird Technologies, Inc.

The Bluetooth®word mark and logos are owned by the Bluetooth SIG, Inc.

Symbol®is a registered trademark of Symbol Technologies. MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the

Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC and are used under license.

Wavelink®, the Wavelink logo and tagline, Wavelink Studio™, Avalanche Management Console™, Mobile Manager™, and

Mobile Manager Enterprise™ are trademarks of Wavelink Corporation, Kirkland.

Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies

and are the property of their respective owners.

Patents

For patent information, please refer to www.honeywellaidc.com/patents.

Limited Warranty

Refer to www.honeywellaidc.com/warranty_information for your product’s warranty information.

Table of Contents
Chapter 1: Introduction 1-1
About this Guide 1-1
Laser Warnings and Labels 1-2
Label 1-2
Components 1-3
Front 1-3
Back 1-4
Connectors 1-5
Ring Scanner / Audio / Battery Connector 1-5
Cradle Connector 1-5
Ring Scanner and Ring Imager 1-6
Cables 1-7
Ring Scanner and Ring Imager Extended Cable 1-7
Audio Connector and Battery Connection Cable 1-7
Li-Ion Battery 1-8
Battery Connectors 1-8
Standard Battery 1-8
Extended Battery 1-8
Chapter 2: Set Up A New HX3 2-1
Quick Start - Assembly 2-1
Voice Case Assembly 2-2
Procedure 2-2
Connect the Ring and Battery Cables 2-3
Battery 2-3
Ring Scanner/Imager 2-4
Attach Ring to Finger 2-5
Status LEDs 2-6
System Status LED 2-6
Bluetooth Status LED 2-6
Wireless Activity 2-6
Connecting the Headset Cable 2-7
Adjust Headset / Microphone and Secure Cable 2-8
Connect / Disconnect Battery 2-9
Connect Battery 2-9
Disconnect Battery 2-9
Set Date and Time Zone 2-10
Using the Input Panel / Virtual Keyboard 2-11
Set Speaker Volume 2-12
i

Using the Keypad 2-12
Using the Control Panel 2-12
Connecting Bluetooth Devices 2-13
Taskbar Connection Indicator 2-13
LED Connection Indicator 2-13
Reboot 2-14
Warm Boot 2-14
Startup Help 2-15
Continuous Scan Mode 2-15
Chapter 3: Product Agency Compliance - HX3 3-1
Laser Light Safety Statement 3-3
Important Safety Warnings - Desktop Cradle 3-5
Chapter 4: Technical Assistance 4-1
ii

Chapter 1: Introduction

The HX3 is a small, lightweight wearable voice computer. The HX3 is designed for use with voice applications while the user's

hands are actively engaged with the physical environment, including piece picking to carts, containers or conveyers; case

picking; parcel moves; and broken case activities.

The HX3 can be docked in the HX2 Cradle. The HX3 batteries can be re-charged while the HX3 is in the cradle. The batteries

are also re-charged in the HX2 Battery Charger. When the HX3 is docked in a powered cradle, connection is broken between

the tethered battery and the HX3. The HX3 begins receiving power through the powered cradle connector. It may be necessary

to wake the HX3 from Suspend when it is inserted in the cradle.

Before you begin:

1. ActiveSync must be installed on a desktop/laptop PC with a USB port.

2. Connect the HX3 via a USB-Client cable to the PC.

3. Copy LXEConnect setup files from the HX3 to the PC.

4. Install and launch LXEConnect on the PC.

When HX3 configuration is complete, exit LXEConnect and disconnect the ActiveSync connection.

About this Guide

This HX3 User's Guide provides instruction for the end-user or system administrator to follow when setting up a new HX3.

This user's guide has been developed for aHX3with a Microsoft® Windows® CE 5operating system.

1-1

Laser Warnings and Labels

lDo not look into the laser’s lens.

lDo not stare directly into the laser beam.

lDo not remove the laser caution labels from the HX3.

lDo not connect the laser bar code aperture to any other device. The laser bar code aperture is certified for use with the

HX3 only.

Caution

Laser radiation when open. Please read the caution labels. Use of controls, adjustments or performance of

procedures other than those specified herein may result in hazardous radiation exposure.

Ring Scanner and Ring Imager Caution Label – Class 2 Laser Scanner

The laser light label is located on the side of the ring scanner and ring imager.

Label

1-2

Components

Front

1. Wireless LED (Yellow)

2. Bluetooth LED (Blue)

3. System Status LED (Green or Red)

4. Speaker

5. White Button (Up Arrow)

6. Yellow Button (Enter)

7. Green Button (Down Arrow)

8. Cradle Connector

9. Blue Modifier Key

10. Microphone

11. Power Button

1-3

Back

Wear on Left Side, Ring on Left Hand Wear on Right Side, Ring on Right Hand

1. Ring Scanner Tether cable channel

2. Retaining Clip for Ring Scanner Tether Connector

3. Ring Scanner cable connector

4. Battery Cable connector

5. Retaining Clip for Tethered Battery Connector

6. Tethered Battery Cable channel

7. Cradle Connector

1. Tethered Battery Cable channel

2. Retaining Clip for Tethered Battery Connector

3. Battery Cable connector

4. Ring Scanner cable connector

5. Retaining Clip for Ring Scanner Tether Connector

6. Ring Scanner Tether cable channel

7. Cradle Connector

1-4

Connectors

Ring Scanner / Audio / Battery Connector

Connector 1 is on the left.

Connector 2 is on the right.

Both connectors attach to cables for:

lTethered Ring Scanner (Laser or Imager)

lTethered Headset / Microphone and Battery

lTethered Battery

Cradle Connector

Connector 3 is at the base of the HX3. It connects to the Cradle. When the HX3 is in a powered cradle, the HX3 receives

external power through the Cradle connector.

USB Keyboard or USB Mouse input is received through the Cradle connector when the HX3 is in the HX3cradle.

1-5

Ring Scanner and Ring Imager

The trigger module and ring strap module are user replaceable.

Laser Scanner

1. Scan Window

2. Trigger

3. Ring Strap

4. Connector

Laser Imager

1. Illumination LEDs

2. Scan Window

3. Trigger

4. Ring Strap

5. Connector

1-6

Andere Handbücher für HX3

Inhaltsverzeichnis

Andere Honeywell Handheld Handbücher

Honeywell

Honeywell MX7 Tecton Bedienungsanleitung

Honeywell

Honeywell Dolphin 99 EX Bedienungsanleitung

Honeywell

Honeywell Dolphin 75e Bedienungsanleitung

Honeywell

Honeywell 26079 Bedienungsanleitung

Honeywell

Honeywell Dolphin 75e Bedienungsanleitung

Honeywell

Honeywell Dolphin 75e Bedienungsanleitung

Honeywell

Honeywell CT50 Bedienungsanleitung

Honeywell

Honeywell Dolphin 75e Bedienungsanleitung

Honeywell

Honeywell HX2 Bedienungsanleitung

Honeywell

Honeywell DOLPHIN 6100 Bedienungsanleitung

Honeywell

Honeywell Optimus 5100 Bedienungsanleitung

Honeywell

Honeywell ScanPal EDA61K Series Bedienungsanleitung

Honeywell

Honeywell 8680i Series Bedienungsanleitung

Honeywell

Honeywell Dolphin 70e Black Bedienungsanleitung

Honeywell

Honeywell MX7 Tecton Bedienungsanleitung

Honeywell

Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin... Bedienungsanleitung

Honeywell

Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin... Bedienungsanleitung

Honeywell

Honeywell Dolphin CT60 NI Bedienungsanleitung

Honeywell

Honeywell HX2 Bedienungsanleitung

Honeywell

Honeywell Dolphin 9900 Bedienungsanleitung

Honeywell

Honeywell ScanPal EDA50 Bedienungsanleitung

Honeywell

Honeywell Dolphin 6110 Bedienungsanleitung

Honeywell

Honeywell Dolphin 75e Bedienungsanleitung

Honeywell

Honeywell ScanPal EDA51 Bedienungsanleitung

Beliebte Handheld Handbücher anderer Marken

MiTAC

MiTAC Mio 168 Bedienungsanleitung

Wasp

Wasp WDT92 Bedienungsanleitung

Texas Instruments

Texas Instruments TI-Nspire Bedienungsanleitung

AXEM Technology

AXEM Technology MBS Bedienungsanleitung

Armstrong

Armstrong Brain Wave Montageanleitung

Unitech

Unitech TB128 Bedienungsanleitung

Symbol

Symbol MC9000-G Installations- und Betriebshandbuch

Unitech

Unitech HT1 1D Batch Bedienungsanleitung

Ingenico

Ingenico IWL220 GPRS Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Symbol

Symbol c2000 Bedienungsanleitung

Symbol

Symbol MC18 Installations- und Betriebshandbuch

Acer

Acer n20 Bedienungsanleitung

Intermec

Intermec CK61 Bedienungsanleitung

Docomo

Docomo F-04H Bedienungsanleitung

Toshiba

Toshiba e350 Series Bedienungsanleitung

Palm

Palm Tungsten E2 Handbuch

Alien

Alien ALR-H460 Bedienungsanleitung