Honeywell HCM-3060 Series Bedienungsanleitung

OWNER’S MANUAL

HIGH NORMAL

OFF

POWER

LOW

HUMIDITY

LEVEL

LOWHIGH

MoistureControl

6 US GALLONS (22.7 LITERS) OUTPUT PER DAY

COOL MOISTURE HUMIDIFIER

Model HCM-3060/HCM-3060C Series

HUMIDIFICATEUR ÀVAPEUR FRAÎCHE

ÀRENDEMENT DE 22,7 LITRES (6 GALLONS US) PAR JOUR

Série de modèles HCM-3060/HCM-3060C

6 US GALLONES (22.7 LITROS) DE RENDIMIENTO

POR DIA HUMEDECEDOR DE HUMEDAD FRESCA

Modelo HCM-3060/HCM-3060C Serie

* Output dependent on room temperature and humidity.

* Le rendement est fonction de la température et du degréd’humiditéd’une pièce.

*El rendimiento depende de la temperatura y humedad del sitio.

*

HU4131.01 HCM-3060/3060C OM 8/6/01 3:59 PM Page 1

When using electrical appliances, basic precautions should always be

followed to reduce the risk of fire, electric shock, and injury to persons,

including the following:

1. Always place this humidifier on a firm, flat and level surface. This humidifier may not

work properly on an uneven surface.

2. Place this humidifier in an area where it is not accessible to children.

3. Do not place the humidifier near any heat sources such as stoves, radiators,

and heaters.

4. Before using the humidifier, check the power cord for any signs of damage. If the cord is

found to be damaged, DO NOT USE and return the humidifier to the manufacturer under

the warranty agreement for repair.

5. This appliance has a polarized plug (one blade is wider than the other). To reduce the

risk of shock, this plug is intended to fit only one way in a polarized outlet. If the plug

does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified

electrician. DO NOT attempt too defeat this safety feature.

6. To disconnect the humidifier, first turn controls to the OFF position, then grip the plug and

pull it from the wall outlet. Never pull by the cord.

7. A loose fit between the AC outlet (receptacle) and plug may cause overheating and a

distortion of the plug. Contact a qualified electrician to replace loose or worn outlet.

8. The humidifier should always be unplugged and emptied when not in operation or while

being serviced or cleaned.

9. Never tilt or attempt to move the humidifier while it is operating or filled with water.

UNPLUG the humidifier before moving.

10. This humidifier requires regular cleaning. Refer to the CLEANING instructions provided.

Never clean the humidifier in any manner other than as instructed in this manual.

11. Turn the humidifier OFF if the relative humidity exceeds 60%, or if you notice moisture on

the inside of your windows. For proper humidity reading use a hygrometer, which is

available in many hardware and department stores or by ordering one from the

manufacturer (see Care Products).

IMPORTANT SAFETY

INSTRUCTIONS

READ AND SAVE THESE SAFETY

INSTRUCTIONS BEFORE USING THIS

HUMIDIFIER

HU4131.01 HCM-3060/3060C OM 8/6/01 3:59 PM Page 2

Thank you for purchasing a Honeywell Natural Cool Moisture®Humidifier. If you would like

more information on our full line of products, please visit our website at:

www.honeywell.com/yourhome.

HOW DOES IT WORK?

Dry air is pulled through the Natural Cool Moisture®system and a quiet fan blows out

invisible, moisture-balanced air. Unwanted minerals from the water are collected inside the

Natural Cool Moisture®filter. When the unit is running, you will not see or feel a “mist”. You

will know your humidifier is putting moisture into the air as you watch the water level in your

tank decrease throughout the day.

WHAT IS AgION™ANTIMICROBIAL?

Your Honeywell Natural Cool Moisture®filter has been designed using new AgION™

technology which prevents surface growth and migration of mold, fungus, algae and bacteria

in the filter for its life - approximately one season. Keep in mind, depending on your water

quality, mineral deposits can still clog or discolor the filter, affect its life and that of the

humidifier.

MODEL - HCM-3060

Your humidifier is made up of these parts:

Water Tank

Fill Cap

Natural Cool

Moisture®filters

Motor Housing

Water Tank

Fill Cap

Filter Frames

Base

Separate Tank Parts

INTRODUCTION

HU4131.01 HCM-3060/3060C OM 8/6/01 3:59 PM Page 3

NOTE: We recommend that the humidifier be disinfected prior to first use. Please see

CLEANING instructions.

•Select a firm, level, flat location - at least six inches (15 cm) from any wall for proper air

flow (Fig. 1). Place the humidifier on a water-resistant surface, as water can damage

furniture and some flooring.

Honeywell will not accept responsibility for property damage caused by was spillage.

FILLING

SET UP

Fig.3

DH-840 w/Tanks Lifted

WALL

6"

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

;;;;;;

@@@@@@



ÀÀÀÀÀÀ

Fig.2

Motor

Housing

Fig.1

•Position the Water Tanks into the humidifier and push them into place.

•Some water will flow into the base when the filled tanks are properly in place.

CAUTION: DO NOT POUR WATER INTO THE GRILLE ON TOP OF THE MOTOR

HOUSING. DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE PERSONAL INJURY.

•Remove the water tanks by grasping handle and pulling up.

Set aside (Fig. 1).

•Turn the Water Tank upside down so that the Fill Cap is

facing up; unscrew the Fill Cap by turning it

counter-clockwise and set aside.

•Lift off Motor Housing, set aside.

•Remove the Natural Cool Moisture®filters with frames from

the base before filling the unit with water.

•Completely wet the Natural Cool Moisture®filters with

individual frame assemblies (Fig. 2) in a sink full of cool

water to help reduce mineral build-up. Replace all wet

filters with frame assemblies back into the humidifier base.

DO NOT SQUEEZE OR WRING OUT THE NATURAL COOL

MOISTURE®FILTER. To help extend the life of your filters

repeat this step each time you fill your humidifier.

•Fill each Water Tank with COOL tap water (Fig. 3). Distilled

water is not necessary as the water is filtered by the

Natural Cool Moisture®filters. DO NOT USE HOT WATER.

Doing so may damage the humidifier.

•Replace the fill cap by turning it clockwise .

DO NOT OVER TIGHTEN. Turn the Water Tank

right-side up.

NOTE: When carrying the filled Water Tank please use the

handle and place your other hand under the tank for

additional support.

HU4131.01 HCM-3060/3060C OM 8/6/01 3:59 PM Page 4

POWER

CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN

ELECTRICAL SHOCK COULD OCCUR.

•With the Power knob in the OFF position, plug the filled humidifier into a polarized 120V

outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way.

HUMIDITY CONTROL

1. Set the dial to the desired position. (Fig. 4).

HIGH: For fast humidifying

NORMAL: For everyday moisture control

LOW: For quieter nighttime operation

2. Set the Moisture Control knob on HIGH, by turning the dial clockwise to the largest

raindrop ( ). (Fig. 4).

Fig. 4 Moisture Control

NOTE: If the humidifier fan will not start or restart when you select a fan speed, the Moisture

Control may be set too low. Turn the dial clockwise to the largest raindrop ( ) before

High. The Desired Humidity Light will be Off when the unit is producing

moisture (Fig. 4).

OPERATION

HU4131.01 HCM-3060/3060C OM 8/6/01 3:59 PM Page 5

HUMIDISTAT (MOISTURE CONTROL KNOB)

The Moisture Control knob allows you to adjust and select the humidity level to your personal

preference. Your humidifier will turn on and off throughout the day and night to maintain the

desired humidity level you have selected.

SETTING THE MOISTURE CONTROL KNOB/HUMIDISTAT

First run the humidifier per the operation instruction with the Moisture Control knob set at

HIGH (Fig. 4).

•Let the humidifier run on high for at least one hour or until your room has reached a

comfortable humidity level.

•At this point, slowly turn your Moisture Control knob counter-clockwise until the

humidifier shuts off and the Desired Humidity light comes on (Fig. 5).

•Now that your Humidistat is set, the humidifier will automatically turn back on when your

room drops below your comfort setting and will automatically turn off again when the

setting is reached.

Turn the humidifier OFF if the humidity level feels too moist or you notice condensation

forming on the walls and/or windows.

Fig.5 Moisture Control

FEATURES (continued)

FEATURES

HU4131.01 HCM-3060/3060C OM 8/6/01 3:59 PM Page 6

STEP ONE:

SCALE REMOVAL

BASE

1. Fill the Base with either:

•1 cup (8 ozs.) of undiluted white

vinegar

or

•Use DuraRinse®Humidifier

Cleaner, part no. AC816, following

the instructions on the bottle.

2. Let solution stand for 20 minutes.

3. With the vinegar or DuraRinse®in

the Base clean all interior surfaces

with a soft cloth or brush to help

remove scales.

4. Rinse the Base thoroughly with

water to remove scale and cleaning

solution.

STEP TWO:

DISINFECTING

WATER TANK/BASE

1. Fill the Water Tank with:

•1 teaspoon of household bleach

and

•1 gallon of water

Pour some of this solution into the Base.

2. Let solution stand for 20 minutes.

3. Rinse with water until the odor of bleach

is gone.

NOTE: THE USE OF OTHER WATER TREATMENT PRODUCTS AND CHEMICALS MAY CAUSE

DETERIORATION OF THE FILTERS OR DAMAGE THE HUMIDIFIER, THEREBY HINDERING THE

HUMIDIFIER’S EFFECTIVENESS.

We recommend cleaning the humidifier once a week, more often if you have hard water,

notice a build-up of impurities or detect unpleasant odors.

Cleaning involves two steps SCALE REMOVAL and

DISINFECTING. Be sure to perform these in the proper order to

avoid harmful chemical interactions.

•First, turn off and unplug the humidifier.

•Remove the Water Tanks, and Motor Housing.

•Remove the Natural Cool Moisture®filters from the Base (Fig. 6).

•Discard any remaining water from the Base.

NOTE: REMOVE FILTERS BEFORE CLEANING.

Failure to remove filters during cleaning will destroy the filters.

Fig.6

Filters

Base

WEEKLY CLEANING

HU4131.01 HCM-3060/3060C OM 8/6/01 3:59 PM Page 7

NOTE: Do not attempt to clean the Natural Cool Moisture®filters with any chemical

solutions, doing so will damage the filters.

•AgION™prevents the surface growth and migration of mold, fungus, algae, and

bacteria. It is normal for a filter to discolor from mineral build-up. This will vary

depending on water quality.

•If a Natural Cool Moisture®filter appears to be clogged by hard water or mineral deposits,

soak it in a sink full of cool water for 10 minutes. DO NOT SQUEEZE OR WRING OUT THE

NATURAL COOL MOISTURE®FILTER. Always place filters back in the humidifier wet.

•To prevent mineral deposits use DuraFree®Humidifier Water Softener, part no. AC817, each

time the Water Tank is refilled.

•Treat the Natural Cool Moisture®filters with care. DO NOT squeeze or wring out.

DO NOT clean the filter using any chemical solution.

•Always purchase Honeywell Brand Natural Cool Moisture®filters as the fan motor of this

humidifier and the Natural Cool Moisture®filter are designed to function efficiently as a

set. Using any other filter could damage the motor or reduce the humidifier’s performance.

•Be sure to empty water from the Water Tank and Base when not in use.

•Follow weekly CLEANING instructions when the humidifier will not be used for at least one

week or more, or at the end of the season.

•At the end of the season, remove and throw away the filters, however SAVE the Filter

Frames. Do not store with used filters.

•Dry the humidifier completely before storing. Do not store with water inside the Base or

Water Tank.

•Pack the unit in its original carton and store in a cool, dry location.

•Before next use, remember to install new filters and clean the humidifier.

PROLONGING THE LIFE OF THE FILTERS AND

MAINTAINING A CLEAN HUMIDIFIER

END-OF-THE-SEASON CARE AND STORAGE

HU4131.01 HCM-3060/3060C OM 8/6/01 3:59 PM Page 8

Q: I hear the fan turning, but I don’t see any mist. Is my humidifier operating

properly?

A: Dry air is pulled through the Natural Cool Moisture®system and a fan disperses invisible,

moisture-balanced air. There is no “mist”emitted. When operating normally you will feel

only cool air coming from the unit. Monitor the water level in your tank/base. If you notice

a decrease in the Water Tank over 24 hours then the unit is operating normally.

Q: My unit has been running for several hours. I hear the fan spinning, but I do not notice the

water level in the tank decreasing.

A: First, check the Natural Cool Moisture®filters to be sure they’re wet. If a pad appears dry,

remove it from the base and gently rinse under cool water. Reposition wet filter in the

base. You may also want to note the current moisture level in your home. If the humidity

level is over 60% the unit will not put out much moisture as your air is already saturated.

Q: The humidifier is not running (the fan is not even spinning), but all (or some) of the lights

are on.

A: If the Desired Humidity light is ON: The Moisture Control knob may be set too low. Moving

the Moisture Control knob to the HIGH setting should restart the unit.

Q: The humidistat was set according to the manual, but the humidifier never seems to turn

back on. Is something wrong?

A: The humidistat may be set too low. Moving the humidistat knob to the highest setting

should restart the unit. Reset the humidistat following the instructions under FEATURES.

Q: The humidistat was set according to the manual, but the humidifier never seems to turn

off. Is something wrong?

A: The humidistat may be set too high. Reset the Moisture Control knob following the

instructions under FEATURES.

Q: My Natural Cool Moisture®filter is Discoloring. Do I need a new one?

A: Probably not. Since your Natural Cool Moisture®filters have been made with AgION™

technology, the change indicates only a mineral deposit. Soak filters in a sink full of cool

water for 10 minutes and place back in humidifier wet. Some discoloration may remain but

should not affect the humidifier’s performance.

Q: Water only seems to be draining from one tank, is this normal?

A: Yes, water may drain from one tank completely or partially before the second tank starts to

drain. This is normal and does not reduce the ability of the humidifier to put out moisture.

TROUBLE SHOOTING

HU4131.01 HCM-3060/3060C OM 8/6/01 3:59 PM Page 9

If your local retailer is out of stock, Honeywell replacement parts and care products may be

ordered directly. You can call 1-800-332-1110 to order with a MasterCard, Visa, Discover or fill

out the form below and mail it along with a check or money order (sorry no COD’s accepted) to:

Honeywell

Consumer Service Center

250 Turnpike Road

Southborough, MA 01772

Please allow four to six weeks for delivery.

Massachusetts residents please add 5% Sales Tax.

Item Item No. Qty. U.S. CAN Total

Natural Cool Moisture®Filter, set of three HAC-801 $14.99 $22.00

Filter Frames, set of three HAC-801-1 5.00 7.25

DuraFree®Humidifier Water Softener (32 oz.) AC-817 5.00 7.25

DuraRinse®Humidifier Cleaner (32 oz.) AC-816 5.00 7.25

Fill Cap HCM-3060-1 5.00 7.25

Water Tank and Fill Cap (Right) HCM-3060-2R 25.00 35.00

Water Tank and Fill Cap (Left) HCM-3060-2L 25.00 35.00

HAC-555 19.99 29.00

SUBTOTAL

MA Residents add 5% Sales Tax / CAN Residents only add 7% GST

Shipping and Handling (US res. add $4.95 / CAN res. add $7.25)

TOTAL ENCLOSED

Name Check or Money Order Enclosed

Address Credit Card No.

Exp. Date

Day Time Phone Signature

PRICE

0 30 50 100

DRY COMFORT DAMP

%

Digital Hygrometer and

Thermometer (F°/C°)

Measure room temperature and humidity

level. Free standing; can be used anywhere

in the room.

CARE PRODUCTS

HU4131.01 HCM-3060/3060C OM 8/6/01 3:59 PM Page 10

Honeywell HCM-3060 Series Bedienungsanleitung

Beliebte Luftbefeuchter Handbücher anderer Marken