Honeywell Flare Front Series Bedienungsanleitung

Modern Gas Fireplaces - Linear Fireplaces

INSTALLER: Leave this manual with the appliance.

CONSUMER: Retain this manual for future reference.

INSTALLATION AND SERVICE OF THIS APPLIANCE MUST BE

PERFORMED BY QUALIFIED CERTIFIED NFI PERSONNEL OR

CERTIFIED FLARE FIREPLACE DEALER.

Massachusetts: The piping and final gas connection must be performed by a

licensed plumber or gas fitter in the State of Massachusetts. Also, see

Carbon Monoxide detector requirements on page 56

NOTICE

Flare Fireplaces Installation Guide –Honeywell CSv7

[Flare Double Corner, Left Corner, Right Corner, Front, See-Through and Room Definer] v14.6

FLARE REQUIRES INSTALLATION BE

PERFORMED BY AN NFI CERTIFIED

INSTALLER, OR A CERTIFIED

FLAREAUTHORIZED INSTALLER.

INSTALLATIONS THAT DO NOT

FOLLOW THIS INSTRUCTION WILL

NOT BE COVERED BY WARRANTY OR

SERVICED.

 
 
2 | P a g e 
 
TABLE OF CONTENTS 
SAFETY INFO AND WARNINGS.....................................................................................................................................5
FLARE FIREPLACES –FRAMELESS IN EVERY WAY .........................................................................................................7
SAFETY.....................................................................................................................................................................7
CSA CERTIFICATION ..............................................................................................................................................7
MANUAL MODEL LIST & INFORMATION......................................................................................................................8
FIREPLACE OPERATION................................................................................................................................................9
ELECTRICAL AND POWER REQUIREMENTS.............................................................................................................................9
ON/OFF OPERATION ......................................................................................................................................................9
WALL SWITCH ............................................................................................................................................................10 
MEDIA ARRANGEMENTS ................................................................................................................................................11 
MEDIA CALCULATIONS ..................................................................................................................................................12 
FEATURE REMOVAL...................................................................................................................................................13 
SAFETY SCREEN REMOVAL..............................................................................................................................................13 
EXTERNAL TEMPERED GLASS REMOVAL –DOUBLE GLASS FIREPLACE.......................................................................................14 
INTERNAL CERAMIC GLASS REMOVAL .............................................................................................................................15 
SIDE GLASS TRIM RMEOVAL /INSTALLATION FLARE H AND EH ..................................................................................................17 
REFLECTIVE BACK INSTALL..............................................................................................................................................18 
INSTALLATION STEPS.................................................................................................................................................19 
INSTALLATION PREPARATION ...................................................................................................................................20 
ACCESS PANEL ............................................................................................................................................................20 
FIREPLACE UNPACKING .................................................................................................................................................21 
FIREPLACE TELESCOPIC LEGS SETUP ..................................................................................................................................22 
LEG SETUP FOR FRONT AND SEE-THROUGH UNITS ............................................................................................................23 
LEG SETUP FOR CORNER UNITS .................................................................................................................................24 
UNPACKING CONTROL UNIT AND ACCESSORIES ....................................................................................................................25 
FIREPLACE POSITIONING................................................................................................................................................26 
LED LIGHTS................................................................................................................................................................27 
LED LIGHT INSTALL AND POWER ......................................................................................................................................28 
LED CONTROLLER AND REMOTE ......................................................................................................................................29 
OPTIONAL BLOWER KIT FOR SCREENED UNIT............................................................................................................31 
VENT TERMINATION..................................................................................................................................................32 
VENT AND FIREPLACE SIZE..............................................................................................................................................33 
MINIMUM COMBUSTIBLE CLEARANCES FROM VENT ..............................................................................................................33 
VERTICAL TERMINATION................................................................................................................................................34 
VENT TERMINATION CLEARANCES ............................................................................................................................36 

 
 
3 | P a g e 
 
VENT RESTRICTOR SETUP ...............................................................................................................................................38 
CHIMNEY PATH INSTALLATION AND PLANNING........................................................................................................39 
FLARE 30|30H..........................................................................................................................................................40 
FLARE 45|45H|45EH..................................................................................................................................................41 
FLARE 50|50H|50EH..................................................................................................................................................42 
FLARE 60|60H|60EH..................................................................................................................................................43 
FLARE 70|70H|70EH..................................................................................................................................................44 
FLARE 80|80H|80EH..................................................................................................................................................45 
FLARE 100|100H|100EH............................................................................................................................................46 
POWER VENTING.......................................................................................................................................................47 
ELECTRICAL CONTROL TO THE PV SYSTEM...........................................................................................................................49 
GAS INSTALLATION....................................................................................................................................................50 
GENERAL...................................................................................................................................................................50 
ORIFICE SIZE...............................................................................................................................................................52 
GAS VALVE ACCESS DOOR ..............................................................................................................................................52 
MANUAL GAS SHUTOFF ....................................................................................................................................52 
LIQUID PROPANE USAGE IN A FLARE FIREPLACE ....................................................................................................................53 
COMMONWEALTH OF MASSACHUSETTS ............................................................................................................................54 
FLARE FIREPLACES - DOUBLE GLASS ..........................................................................................................................55 
OVERVIEW ................................................................................................................................................................55 
DOUBLE GLASS -INSTRUCTIONS ......................................................................................................................................56 
TELEVISION MOUNTING ABOVE FIREPLACE...............................................................................................................57 
TV INSTALL –FLAT EXAMPLE...........................................................................................................................................58 
TV INSTALL –L TYPE EXAMPLE.........................................................................................................................................59 
TV INSTALL RECESS –45 DEGREE ELBOW ON TOP OF THE UNIT ................................................................................................60 
TV INSTALL WITHOUT RECESS –MANTEL INSTALLATION .........................................................................................................61 
CLEARANCES..............................................................................................................................................................62 
GENERAL INFORMATION AND STEPS .................................................................................................................................62 
CLEARANCES SPECIFICATION...........................................................................................................................................69 
MANTEL CLEARANCE ....................................................................................................................................................70 
CLEARANCE TO A SPRINKLER ...........................................................................................................................................71 
HEAT RELEASES...........................................................................................................................................................72 
AIR INTAKE ................................................................................................................................................................72 
EXAMPLES OF HEAT RELEASES .........................................................................................................................................73 
SETTING UP YOUR FLARE FOR ENHANCED OPERABILITY............................................................................................74 
KEEPING THE WALL ABOVE YOUR FLARE AS COOL AS POSSIBLE .................................................................................................74 
KEEPING YOUR DOUBLE GLASS AS COOL AS POSSIBLE.............................................................................................................75 
FLARE FRONT,SEE THROUGH,AND CORNER FIREPLACE CLEARANCE...........................................................................................76 
Flat –side and isometric view .............................................................................................................................76 
L shape –side and isometric view .......................................................................................................................78 

 
4 | P a g e 
 
INDOOR/OUUTDOOR KIT ..........................................................................................................................................80 
APPLIANCE LOCATION ..................................................................................................................................................80 
BURNER DIMENSIONS...............................................................................................................................................83 
HOME AUTOMATION................................................................................................................................................84 
ELECTRIC AND CONTROL ...........................................................................................................................................85 
ELECTRIC DIAGRAM -SCREEN..........................................................................................................................................85 
ELECTRIC DIAGRAM –DOUBLE GLASS OR PV.....................................................................................................................86 
DOUBLE GLASS BOARD &LED LIGHT GUIDE .....................................................................................................................87 
ELECTRIC DIAGRAM –PV SYSTEM.....................................................................................................................................88 
REPLACEMENT PARTS................................................................................................................................................89 
MAINTENANCE..........................................................................................................................................................90 
TROUBLESHOOTING..................................................................................................................................................92 
ADJUSTING YOUR AIR SHUTTER TO PREVENT SOOTING ...........................................................................................................92 
APPENDIX..................................................................................................................................................................93 
MAINTENANCE LOG .....................................................................................................................................................93 
WARRANTY POLICY ......................................................................................................................................................94

5 | P a g e

SAFETY INFO AND WARNINGS

WARNING!

If the information in these instructions are not followed exactly, a fire or explosion may result causing property

damage, personal injury, or loss of life.

Installation and services must be performed by a qualified installer, service agency or the supplier.

The direct vent system appliance must be installed as an OEM installation in manufactured homes (USA only)

or an aftermarket permanently located, or a mobile home, where no prohibited by local codes and must be

installed in accordance with Manufacturer’s instructions and the Manufactured Home Construction and Safety

Standard, Title 24 CFR, Part 3280, in the United States, or the Standard for Installation in Mobile Homes, CAN/

CSA Z240 MH Series, in Canada.

This appliance is only for use with the type(s) of gas indicated on the rating plate. A conversion kit is supplied

with the appliance.

This product is listed to the ANSI standards for ANSI A21.50b-2009 / CSA 2.22b-2009 Vented Gas

Fireplaces CAN/ CGA 2.17-M91 Gas-Fired Appliance for use at high altitudes.

NEVER LEAVE CHILDREN OR ANY OTHER AT-RISK INDIVIDUAL ALONE WITH

THE APPLIANCE.

Due to high temperatures, the appliance should be located out of traffic and away from furniture and draperies.

Children and adults should be alerted to the hazards of high surface temperature and should stay away to avoid burns or

clothing ignition.

This appliance must be electrically wired and grounded in accordance with local codes, or in the absence of local codes,

with National Electric Code ANSI/NFPA 70 –latest edition or the Canadian Electric Code CSA C22.1

A 110-120V AC Circuit for this product must be protected with ground-fault circuit-interrupter protection, in compliance

with the applicable electrical codes, when it is installed in locations such as bathrooms or near sinks.

Proposition 65 Warning: Fuels used in gas, wood burning or oil-fired appliances, and the products of combustion of such

fuels, contain chemicals known to the State of California to cause cancer, birth defects and other reproductive harm.

California Health & Safety Code Sec. 25249.6. In the State of Massachusetts, only a licensed plumber and gas fitter may

install this product. See Note for the Commonwealth of Massachusetts.

State of California. Proposition 65 Warning. Fuels used in gas, wood-burning or oil-fired appliances, and the

products of combustion of such fuels, contain chemicals known to the State of California to cause cancer, birth defects and

other reproductive harm. California Health & Safety Code Sec. 25249.6

6 | P a g e

Young children should be carefully supervised when they are in the same room as the appliance. Toddlers, young children,

and others may be susceptible to accidental contact burns. A physical barrier is recommended if there are at-risk

individuals in the house. To restrict access to a fireplace or stove, install an adjustable safety gate to keep toddlers, young

children, and other at-risk individuals out of the room and away from hot surfaces.

WARNING!

When an existing Category I heater is removed or replaced, the original venting system may no longer be sized to properly

vent the attached appliances. Instructions shall also indicate effects of an improperly sized venting system (formation of

condensate, leakage, spillage, etc.) and shall specify the following test procedure.

7 | P a g e

FLARE FIREPLACES –FRAMELESS IN EVERY WAY

Flare Fireplaces is where innovation, quality and luxury come together to form new ideas. By combining

superior raw materials, contemporary design, creative technology, and a frameless way of thinking, we

have created a full line of direct-vent fireplaces that are luxurious, simple to operate, and efficient. Our

modern gas fireplaces are distinguished by their clean linear design, superior built quality, and unique

features.

SAFETY

CSA CERTIFICATION

All our fireplaces are tested and have been certified to meet stringent CSA guidelines, ensuring optimum

quality, safety, and efficiency.

All our fireplaces have been certified and tested to work with Natural Gas or Propane.

Certification Information:

ANSI Z21.88/CSA 2.33-2014- Vented Gas Fireplace Heaters

CSA CLASSES:

CLASS 2901 84 / CLASS 2901 04

All fireplaces are rated for commercial and residential use.

The CSA Mark

The Canadian Standards Association (CSA) is a nonprofit association serving business, industry, government

and consumers in Canada and the global marketplace. Among many other activities, CSA develops

standards that enhance public safety.

A Nationally Recognized Testing Laboratory, CSA is familiar with U.S. requirements. According to OSHA

regulations, the CSA-US Mark qualifies as an alternative to the UL Mark.

Here are some areas where CSA standards are applied:

•Canadian Electrical Code, Part III-Outside Wiring

•Electrical Engineering Standards

•Electromagnetic Compatibility

8 | P a g e

MANUAL MODEL LIST & INFORMATION

The Following manual should be used for the following Flare Fireplaces Models:

•Flare Front 30-100 “– 16” (R), 24” (H), 30” (EH)

•Flare See-Through 30-100” –16” (R), 24” (H), 30” (EH)

•Flare Corner Right & Left 30-100” –16” (R), 24” (H)

•Flare Double Corner 30-100” –16” (R), 24” (H)

•Flare Room Definer 45-100” –16” (R), 24” (H), 30” (EH)

All models share the same gas valve system, gas connection, and glass type, simplifying installation and operation.

All warnings and instructions apply to all models.

Refer to the model name for specific model, clearance and installation information.

Flare Fireplaces should only be connected to M&G DuraVent or ICC 4x6 or 5x8 venting system. Refer to the specific

appliance model and size to determine vent size (Gas specification table) and chimney pathway requirements

(Chimney path installation & planning table). For detailed chimney installation information please use the M&G

DuraVent direct vent installation manual: http://www.duravent.com

For details on ICC direct vent installation, please use the ICC installation guide.

http://icc-chimney.com/en/exceldirect-support

This product is listed to ANSI standards for “Vented Gas Fireplace Heaters” and applicable sections of “Gas Burning

Heating Appliances for Manufactured Homes and Recreational Vehicles”, and “Gas Fired Appliances for Use at High

Altitudes”.

Installation MUST comply with local, regional, state, and national codes and regulations. Consult insurance carrier,

local building inspector, fire officials or authorities having jurisdiction over restrictions, installation inspection and

permits.

This installation must conform to local codes. In the absence of local codes, you must comply with the

National Fuel Gas Code, ANSI Z223.1-latest edition in the U.S.A. and the CAN/CGA B149 Installation Codes in Canada.

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. For

assistance or additional information, consult a qualified service technician, service agency or your dealer.

FLARE REQUIRES INSTALLATION BE

PERFORMED BY AN NFI CERTIFIED INSTALLER,

OR A CERTIFIED FLARE DEALER.

INSTALLATIONS THAT DO NOT FOLLOW THIS

INSTRUCTION WILL NOT BE COVERED BY

WARRANTY OR SERVICED.

9 | P a g e

FIREPLACE OPERATION

ELECTRICAL AND POWER REQUIREMENTS

Screen Unit: 110V, 15A Outlet (Dedicated circuit is optional but recommended) or Directly wired. When using an outlet, make sure

the outlet is accessible in the event of servicing.

**110V, 15A additional power source needed if Optional RGB-LEDs are included in unit.

Double Glass: 110V, 15A Outlet (Dedicated circuit is optional but recommended) or Directly wired. When using an outlet, make

sure the outlet is accessible in the event of servicing.

**No additional power source needed for optional RGB-LEDs.

ON/OFF OPERATION

The ON Off operation on the Flare Fireplaces with a Honeywell valve is controlled by switching ON or Off power supply to the

fireplace plug or hotwire.

The Fireplace will attempt to start whenever electric power is supplied to it. The Fireplace power supply needs to be wired by

QUALIFIED ELECTRICIAN.

The electrician can provide the operator a switch to control the outlet the fireplace is connected to.

The use of the plug should only be done when access to the outlet is available even after installation is completed.

This appliance must be grounded. In the event of a malfunction or breakdown, grounding provides a path of least resistance for

electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding

conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is professionally installed and

grounded in accordance with all local codes and ordinances.

The Flare Fireplaces with a Honeywell is provided with a 110V plug that can be connected to a controlled outlet for ON/OFF operation

of the fireplace. Plug can also be removed to connect directly for hardwire operation.

10 | P a g e

WALL SWITCH

The Fireplace ON/OFF operation can be done with a standard wallswitch provided by the electrition and wired to

control the supply of power to the fireplace outlet or hardwire setup.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Kamin im Innenbereich Handbücher

Honeywell

Honeywell Kromschroder TZI Series Handbuch

Beliebte Kamin im Innenbereich Handbücher anderer Marken

Brigantia

Brigantia 35-DVRS31N-2 Betriebsanleitung

Nordpeis

Nordpeis Bergen Bedienungsanleitung

Superior

Superior BCT2536TMN Bedienungsanleitung

Quadra-Fire

Quadra-Fire 5100I-GD-B Bedienungsanleitung

Renaissance

Renaissance RUMFORD 1000 Bedienungsanleitung

Lacunza

Lacunza IV-800 Bedienungsanleitung

Baxi

Baxi 940 Gebrauchsanweisung

Dru

Dru Maestro 60/2 Tall RCH Bedienungsanleitung

Diamond Fireglass

Diamond Fireglass SS-O22 Bedienungsanleitung

HearthStone

HearthStone Windsor Bay 8830 Programmierhandbuch

Napoleon

Napoleon ASCENT B42 Bedienungsanleitung

Enviro

Enviro E33GI Bedienungsanleitung

Smeg

Smeg L30 FABE Montageanleitung

KEDDY

KEDDY K700 Bedienungsanleitung

Godin

Godin 3451 Bedienungsanleitung

Jøtul

Jøtul Jotul GI 535 DV IPI New Harbor Bedienungsanleitung

Desa

Desa CCFPDFT Bedienungsanleitung

Miles Industries

Miles Industries Vogue 1300IRN Handbuch