Honeywell MT-SY-HWLM1916 - Arius 19" Widescreen LCD... Bedienungsanleitung

ARIUS™

19” Wide LCD Monitor

Owner’s Manual

Table of Contents

Before You Start

Compliance Information .........................................................................................

Important Safety Instructions .................................................................................

Getting Started

Unwrapping The Monitor ........................................................................................

Package Contents ..................................................................................................

Quick Installation ....................................................................................................

Adjusting The Visual Angle .....................................................................................

Using the LCD Display

Operation Of The Control Panel .............................................................................

Using The On Screen Display (OSD) Menu ...........................................................

Adjusting The Screen Automatically .......................................................................

OSD Options ...........................................................................................................

Other Information

 Specications..........................................................................................................

Troubleshooting .....................................................................................................

Customer Support ..................................................................................................

Cleaning the LCD Display ......................................................................................

Warranty Information ..............................................................................................

Product Registration ...............................................................................................

15-16

- 1 -

Compliance Information

FCC Safety Compliance

The equipment meets by the test proof the restriction of the relevant B series digital device of

Article 15, FCC regulations. The design purpose of these restriction is to provide reasonable

protection for daily life at home against the environmental harmful interference. The equipment

will generate harmful interference to the radio communications if it is not installed according to

the instructions. However, we also can’t promise that no interference situation will take place

evenafteraspecicinstallationmode.Weencouragetheusertotrythefollowingoneormul-

tiple methods to reduce the interference if the equipment really results in harmful interference

to PA or TV reception (you may sense through the equipment):

- Change the direction or the location of the receiving antenna.

- Increase the distance between the equipment and the receiving antenna.

- Connect the equipment and the receiving antenna to different socket.

- To ask the experienced PA / TV technical personnel for help.

Hint:

It is necessary for you to use the shielded signal cable and power cord provided with the

equipment if you want to meet the restriction of FCC B class computer devices. The “Federal

Communications Committee” warns that the user will lose the right of operating the equipment

towardtheunauthorizedvariationofmodicationoftheequipmentwithoutthedeniteapproval

from the responsible authorization for the compliance.

Warning:

This is a FCC Class B product. The product may generate radio interference when being oper-

ated under normal environment. In this case, some protective measures should be taken by its

user.

- 2 -

Important Safety Instructions

Only Use The Specied Power Voltage.

Usingincorrectvoltagewillcauseafailure,andmaypossiblyresultinarehazardorariskof

electric shock.

Do Not Tamper With Or Damage The Provided Cables

Do not pull on, bend or place any object on top of the power or signal cables. Doing so may

damagethecableresultinginapoorsignalconnection,unsteadypower,rehazardorriskof

electric shock.

Stop Operation Of The Monitor If It Seems Defective

If you sense anything abnormal during the operation of the monitor, such as overheating, a

burning smell or smoke, immediately turn off the monitor and detach the power cord from the

wall outlet. Continued use of the display could cause further damage to the monitor, attached

peripherals, and may even result in person injury or property damage.

Do Not Tamper With The Monitor

Donotdismantlethedisplayorattempttoxorreplaceanyinternalpartsbyyourself.The

display contains parts that store electricity even after the monitor is off. Doing so may result in

arehazardorseverpersonalinjuryordeath.

Do Not Allow Any Foreign Objects Or Liquids To Get Into The Monitor

The presence of a foreign object or liquid in the display during the operation of the monitor may

causeafailureandcouldresultinarehazardorelectricshock.

It Is Recommended Not To Use The Monitor Under Extreme Weather Conditions

Using the monitor during a thunder, snow, or rain storm may expose the display to a high risk

of power surges and could result in equipment failure.

Do Not Use This Device In A Moist Environment

Using the Monitor in a moist environment may adversely affect its intended performance,

shortenitslifeandincreasetheriskofrehazardorelectricshock.

- 3 -

are not responsible for typographical and photographic errors. All trademarks mentioned or

listed herein are the property of their respective owners. Information provided for reference

purposesonly.Allspecicationsandinformationaresubjecttochangewithoutnotice.Allrights

reserved.

General Disclaimer:

We have made every effort to ensure that the information and procedures in this guide are as

accurate and complete as possible; no liability is accepted for any errors or omissions. Soyo

Inc. reserves the right to make any changes without further notice to any products herein. This

document contains proprietary information, which is protected by copyright. All rights are re-

served. No part of this document may be photocopied, reproduced, or translated into another

publication. We reserve the rights to make changes from time to time in the contents hereof

without obligation to notify any person of such revision or changes. SOYO also reserves the

righttochangethespecicationwithoutnoticeandmaythereforenotcoincidewiththecon-

tents of this document. SOYO assumes no responsibilities with regard to the performance or

use of third party products.

Trademark Acknowledgments:

- Honeywell International Inc. makes no representation or warranties with respect to this

product.

- The Honeywell trademark is used by Soyo Inc. under license from Honeywell International

Inc.

- Macintosh is a trademark of Apple Computer, Inc.

- Microsoft, Windows, Windows 98, Windows ME, Windows 2000, Windows XP, and Windows

2003 Server are either registered trademarks of Microsoft Corporation in the United States

and/or other countries.

- Other names and products not mentioned above may be registered trademarks of their re-

spective companies.

- 4 -

Getting Started

Unwrapping The Monitor:

Note: Make sure the power outlet that the monitor will be connected to a standard

110-240 Volt power outlet. Using the incorrect voltage will cause a failure and may

possibly result in a risk of re hazard or electric shock.

1. Prepare a stable, balanced, and clean surface near a wall outlet for the placement of your

LCD Display.

2. Remove all packaging and protective materials from the LCD monitor and place it on the

prepared surface.

3. Remove transport screw to activate the vertical adjustment.

Package Contents:

1 x 19” LCD Monitor

1 x AC Power Cable

1 x D-Sub VGA Cable

1 x DVI Video Cable

1 x USB 2.0 Cable

1 x Audio Cable

1 x Owner’s Manual

- 5 -

Transport Screw

07. USB 2.0

06. USB 2.0

05. USB 2.0

04. Audio Connector

03. VGA Connector

02. DVI Connector

01. Power Connector

01. Power Connector AC Power Input

02. DVI Connector DVI Digital Signal Input

03. VGA Connector VGA Analog Signal Input

04. Audio Connector Audio Input

05. USB 2.0 Input

06. USB 2.0 Output

07. USB 2.0 Output

08. USB 2.0 Output

09. USB 2.0 Output

Quick Installation

Connecting The Monitor To The PC:

1. First, make sure the power is shut off to all units.

2. Connect one end of the video cable (VGA or DVI) to the corresponding port on the back of

the LCD monitor and the other end to the corresponding port on the back of your PC.

Fasten each end of the video cable with the built-in thumb screws to ensure a good

connection.

3. Connect one end of the AC Power Adaptor to the back of the monitor.

4. Plug the other end of the AC Power Adaptor into the wall outlet.

NOTE: It is recommended to plug your LCD monitor and computer into a surge

bar, or power strip, in order to protect your electronics from damage caused by

unstable power or power surges.

5. Turn on your computer and LCD monitor.

Layout Of Connections:

- 6 -

Anti-theft Lock

Upward / Downward Adjustment

08. USB 2.0

09. USB 2.0

Adjusting the Visual Angle

Adjusting The Monitor:

This LCD Monitor can adjust in eight different directions to meet your viewing needs.

Note: Do not touch the screen when adjusting the monitor. Doing so could result in

damage to the screen

Adjustments:

Vertical Height - Lift up or down on the display to adjust to your desired height

Vertical Tilt - Press forward and pull back on the top and bottom of the display to vertically tilt

the monitor to your viewing position

Horizontal Swivel - Press forward and pull back on the sides of the display to horizontally

swivel the monitor to your viewing position

Counter-Clockwise Rotation - Pull up and press down on the corners of the display to rotate

the monitor counter-clockwise to view your documents in either portrait or landscape mode

- 7 -

90° Counter-Clockwise

Rotation

180° Left or Right Swivel

30° Backward Tilt /

15° Forward Tilt

3.5” Upward / Downward

Adjustment

Toturnthemonitor90°angle,rstraise

monitor upward then rotate to desire angle.

Note: Transport screw must be removed to

adjust monitor upward.

Using the LCD Display

Operation Of The Control Panel

ThecontrolpanelisdesignedtocontroltheOnScreenDisplay(OSD)menu.Threeareve

function keys located on the side of the monitor used to navigate through the menu.

Using The On Screen Display (OSD) Menu

The user-friendly OSD menu will allow you to easily adjust your display to the desired visual

settings. At any time you can press the “AUTO” button to exit from the menu.

Operating Procedures

1. Press “MENU” to display the OSD Menu

2. Use “ ” or “ ” to navigate to the desired option

3. Press “MENU” to select the option

4. Use “ ” or “ ” to navigate to the desired setting

5. Press “MENU” to select the setting

6. Use “ ” or “ ” to change the setting

7. Press “AUTO” at any time to go back or exit from the OSD menu.

- 8 -

Function Key Description of Function

Menu Press to display OSD Menu or enter a sub-menu

Press to scroll through the OSD menu and to increase the value of OSD options.

This key is also a default hot-key for increasing your volume level.

Press to scroll through the OSD menu and to decrease the value of OSD options.

This key is also a default hot-key for decreasing your contrast level.

Auto Press to automatically adjust the displayed content to full screen or exit the OSD

menu.

Turn on or turn off the display power

Power LED

Serves as an indicator showing current status of the monitor. The color code is

described as follows:

Standby Mode: Orange/Yellow/Red Flashing

Operating Mode: Green/Blue

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Monitor Handbücher

Honeywell

Honeywell S7999D1048 Bedienungsanleitung

Honeywell

Honeywell S7760A Bedienungsanleitung

Honeywell

Honeywell HMLCD15 Bedienungsanleitung

Honeywell

Honeywell HHMC21 Bedienungsanleitung

Honeywell

Honeywell HMLCD17L Bedienungsanleitung

Honeywell

Honeywell RDD100 Bedienungsanleitung

Honeywell

Honeywell CM4 Versionshinweis

Honeywell

Honeywell HMLCD17E2 Bedienungsanleitung

Honeywell

Honeywell HMLCD17L Bedienungsanleitung

Honeywell

Honeywell Bendix/King KMD850 Montage- und Bedienungsanleitung

Honeywell

Honeywell BW RigRat Bedienungsanleitung

Honeywell

Honeywell 7800 SERIES Bedienungsanleitung

Honeywell

Honeywell HMLCD19L Bedienungsanleitung

Honeywell

Honeywell S7999D SOLA Bedienungsanleitung

Honeywell

Honeywell S7999B Bedienungsanleitung

Honeywell

Honeywell RDD100 Bedienungsanleitung

Honeywell

Honeywell SILENT KNIGHT IDP-Monitor-10 Bedienungsanleitung

Honeywell

Honeywell SPM Versionshinweis

Honeywell

Honeywell IAQPoint Bedienungsanleitung

Honeywell

Honeywell PTI-610 Bedienungsanleitung

Honeywell

Honeywell GENESIS DM Bedienungsanleitung

Honeywell

Honeywell NOTIFIER NCD Bedienungsanleitung

Honeywell

Honeywell HMC14HR Bedienungsanleitung

Honeywell

Honeywell IAQPoint2 Bedienungsanleitung

Beliebte Monitor Handbücher anderer Marken

Linear Acoustic

Linear Acoustic LQ-1000 Bedienungsanleitung

AOC

AOC I2579V Bedienungsanleitung

Gateway

Gateway FPD1520 Bedienungsanleitung

Furuno

Furuno Mu 120c Bedienungsanleitung

Asus

Asus VB171D - 17" LCD Monitor Bedienungsanleitung

Dell

Dell S2230MX Gebrauchsanweisung

Philips

Philips 107C64 Bedienungsanleitung

Dell

Dell S2409WFP Bedienungsanleitung

EverFocus

EverFocus EN-7517E Bedienungsanleitung

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Bedienungsanleitung

Dell

Dell Precision 7680 Bedienungsanleitung

LG 50PM1M - - 50" Plasma Panel Bedienungsanleitung

Bosch

Bosch DDU 9 Bedienungsanleitung

Acer

Acer A231HL Bedienungsanleitung

Philips

Philips 86BDL4152T Bedienungsanleitung

NEC

NEC AccuSync LCD5V Bedienungsanleitung

Emay

Emay SleepO2 Bedienungsanleitung

IBM

IBM 6360 Montageanleitung