Honeywell 5912 Anleitung zur Verwendung

Model 5912

Read this manual carefully and never store it inside the safe!

ENGLISH

Operation & Installation Guide

Depository Safe

with Programmable Digital Lock

Welcome / Package Contents ........................................................................

Install Batteries / Unlock & Open Your New Safe..........................................

Primary & Secondary User Codes / Programming Primary User Code /

Programming Secondary User Code..............................................................

Testing Codes / Override Access Key ...........................................................

Secure Lockout Period / Lost or Forgotten User Codes /

Care and Maintenance ....................................................................................

Anchoring Your Safe.........................................................................................

Using The Depository Door / Notes..........................................................

Consumer Assistance..............................................................................

Ordering Additional Override Access Keys / Safe Identiﬁcation Record /

Digital User Code Record.................................................................................

Limited Warranty...............................................................................................

For Your Protection

• Do not remove the Serial Number tag from the safe.

• Never Store Override Access Keys inside safe.

• Record all Safe Identication Numbers on Safe Identication Record (page 9).

• Save this manual and NEVER keep it inside the safe.

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6

Page 7

Page 8

Page 9

Back

Cover

Index

Depository Safe

The following list outlines the items and quantities of each included with your new safe. Please

carefully check the list to conrm all items have been received. If any item is missing, please contact

Consumer Assistance (See page 8 for contact information).

5912 Depository Safe (1 ea.)

Operation Manual (1 ea.)

Override Access Keys (2 ea.)

9 Volt Battery (1 ea.)

Floor Mat (1ea.)

Mounting Hardware (1 set)

Your Honeywell Steel Depository Safe will provide years of safe and secure protection for your currency

and check deposits, important documents and other personal items. All Honeywell safes are designed

and built using the highest manufacturing standards to ensure maximum user satisfaction under a

variety of conditions. With proper care, your Honeywell safe will provide “Peace of Mind” for many

years to come.

Thank you and enjoy!

Attention: DO NOT RETURN SAFE TO STORE

If you are missing parts or have difculty operating your safe, please contact our Consumer Assistance

Department by telephone. Store will not accept returned products without prior authorization. You must

rst contact our Consumer Assistance Department (See page 8 for contact information).

WELCOME

PACKAGE CONTENTS

Depository Safe

For your convenience, we have included 1 “9 volt” Battery that provides the power for the electronic

locking system. The battery must be installed before using your safe. The battery compartment is

located at the bottom of the digital keypad.

1. Remove the battery cover under the keypad housing (Figure 1).

2. Pull out 9 volt battery connecting wire and attach the supplied 9 volt battery (Figure 2).

3. Insert the connected 9 volt battery fully into the battery housing and replace the battery cover

(Figure 3).

INSTALL BATTERIES

UNLOCK AND OPEN THE SAFE

1. Always make sure that the handle is turned counterclockwise fully to the left until it stops so that it is

in a vertical position before entering code (Figure 1).

2. Enter the preset factory code “168” followed by # key into the keypad (Figure 2).

3. If the correct code is entered, the keypad will beep twice, the green LED will light up and you will

hear a click indicating the handle can be turned clockwise to the right to open (Figure 3 & Figure 4).

Note: You have approximately 5 seconds to open the safe. If you wait any longer, the safe will relock

and you will have to reenter the code to open.

Note:

If an invalid code is entered, the lock will keep beeping and the yellow LED will ash continuously.

UNLOCK & OPEN YOUR NEW SAFE

Note:

If the red LED is on, it is an indicator that the batteries are weak and must be changed immediately.

The Primary and Secondary user codes will not be erased if the battery becomes weak or is

removed. A weak or dead battery should be replaced immediately. To replace the battery please

follow STEPS 1 - 3. Remember to always remove the battery from safe if not using for an extended

period of time. If your battery is completely dead and you cannot open the safe by using the digital

keypad, use the override access key to open safe. The use of Non-alkaline or rechargeable batteries

is NOT RECOMMENDED.

Figure 1

Figure 2

Figure 3

Figure 3 Figure 4

Depository Safe

Your new safe is equipped with a digital lock that can be operated with two separate user codes.

You will need to program these user codes with your own 1-8 digit user codes. however, for increased

security it is reccommended that you use a minimum of 3 digits when deciding on a Primary and

Secondary user code. You must program the Primary user code rst. After the Primary user code is

programmed and tested you can then proceed to program the Secondary user code.

PROGRAMMING PRIMARY USER CODE

PRIMARY & SECONDARY USER CODES

2x’s

Yellow

Figure 1

Figure 2Figure 1

Figure 2

Figure 3

Figure 4

PROGRAM THE PRIMARY USER CODE

1. Open door using the factory preset code of 168 followed by the # key. Locate and press the red

reset button located on the inside edge of the door (Figure 1).

2. The keypad will beep twice and the yellow LED will light up (Figure 2).

3. Enter a new 1-8 digit Primary user code followed by the * key (Figure 3).

4. Your new Primary user code is now active. Leave the door open and proceed to next section.

PROGRAMMING SECONDARY USER CODE

PROGRAM THE SECONDARY USER CODE

1. While the safe door is still open, press the “0” key twice on the keypad (Figure 1).

2. Locate and press the red reset button located on the inside edge of the door (Figure 2).

3. The keypad will beep twice and the yellow LED will light up (Figure 3).

4. Enter a new 1-8 digit Secondary user code followed by the * key. (Figure 4).

5. Your new Secondary user code is now active. Leave the door open and proceed to next section.

The Secondary user code is factory set to 12345678 and the safe can be unlocked by entering

this code followed by the # key. However, it is recommended to change this to your own personal

Secondary user code by following the steps listed below.

Depository Safe

Note:

To test the Secondary user code, you can follow the same steps by entering the Secondary user code

instead of the Primary user code in Step 2.

TESTING CODES

OVERRIDE ACCESS KEY

Your safe is equipped with an override access key which allows immediate access in case you forget

your user codes or the battery needs to be installed or replaced.

1. Remove the sticker from the front of the keypad near the top to access the faceplate mounting

screw and remove the screw using a Phillips head screwdriver (Figure 1).

2. Pull the keypad away from the housing and insert override access key as shown (Figure 2).

3. Insert the override access key and turn counter clockwise to the left (Figure 3).

4. Turn handle clockwise to the right and pull safe door open (Figure 4).

5. Turn override access key clockwise to the right and remove. Replace the keypad over the housing

bottom rst then push forward into place, secure with screw and replace sticker (Figure 5).

6. Store the override access key in a safe place away from the safe.

Figure 1 Figure 2 Figure 3 Figure 4 Figure 5

UNLOCK AND OPEN THE SAFE

1. Always make sure that the handle is turned counterclockwise fully to the left until it stops so that it is

in a vertical position before entering code (Figure 1).

2. Enter your Primary user code followed by # key into the keypad (Figure 2).

3. If the correct code is entered, the keypad will beep twice, the green LED will light up and you will

hear a click indicating the handle can be turned clockwise to the right to open. NOTE: You have

approximately 5 seconds to open the safe. If you wait any longer, the safe will relock and you will

have to reenter the code to open (Figure 3 & Figure 4).

Note:

If an invalid code is entered, the lock will keep beeping and the yellow LED will ash continuously.

Figure 1 Figure 2 Figure 3 Figure 4

Depository Safe

SECURE LOCKOUT PERIOD

If the wrong user code is entered into the keypad 3 consecutive times in a row, the keypad will

automatically go into lockout mode and you will not be able to open the safe using the digital keypad

for 15 minutes. During the lockout period entry can be made using the override access key.

LOST OR FORGOTTEN USER CODES

LOSS OF BOTH PRIMARY AND SECONDARY USER CODES

It is recommended that you record your new user codes in the “Digital User Code Record” section

on page 9 and keep this manual in a secure location away from the safe. However, If both the

Primary user code and Secondary user codes are lost, you may open the safe using the override

access key and use the red user code reset button to reprogram the 1-8 digit Primary user code

or Secondary user code. The instructions for opening the safe with the override access key are

located on page 4.

CARE AND MAINTENANCE

When properly maintained, your safe will continue to operate for many years. In order to ensure

optimum performance of your safe, please follow these simple precautions:

CLEAN HANDS - Never attempt to operate the digital keypad if your hands have excessive dirt, debris

or liquids on them.

CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner (e.g.,

window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER use

abrasive cleansers on the safe or digital keypad.

For future reference, store this Operation and Installation Guide in a secure area away from the safe.

DO NOT DISCARD!

Depository Safe

You may bolt your safe to the oor for added theft protection and resistance to tipping. Your safe

has (4) pre-drilled bolt-down holes in the oor panel. Mounting hardware is provided for securing to

concrete or wood surfaces. If bolting to metal surfaces additional hardware will be needed. Check

with your local home center.

Note: Bolting/unbolting of the unit is at the consumer’s expense and discretion. LH Licensed

Products is not responsible for any costs incurred if the unit is to be replaced.

If you have any questions about mounting the safe, please check with your local home center/

hardware retailer or independent contractor.

To secure your safe to a concrete surface:

1. Select a suitable and convenient location for your safe.

2. Empty the safe and remove the oor mat.

3. Locate the pre-drilled holes on the inside of safe.

4. Place your safe in the desired location (Figure 1).

5. Line up the pre-drilled holes and mark the oor through the

holes then move the safe aside.

Note: Only 2 of the four holes is needed for mounting purposes.

You may choose either one of the front holes and then use the rear

hole in the diagonal position (See Figure 2 example).

6. Using a 1/2 inch (12mm) drill bit, drill a hole at each of the 2 marks approximately 3 inches in depth

then remove any excess dust (Figure 3).

7. Place the (2) inserts into the drilled holes and tap gently with hammer until ush with oor (Figure 4).

For wood surfaces skip steps 6 & 7:

If mounting to a wood surface, you will drill the 2 marks you made using a 11/32 inch (10mm) drill bit

instead to make 2 pilot holes and the inserts will not be used (Figure 3).

8. Place the safe back over the holes and secure in place using the (2) lag screws that are provided

and then tighten with a 1/2 inch socket wrench (Figure 5).

9. Once completed, replace the oor mat and close the safe door. Then rotate handle

counterclockwise to the left to lock.

ANCHORING YOUR SAFE

Figure 2

Figure 1

Figure 3 Figure 4

Inserts Used Only for

Concrete Mounting

Figure 5

Depository Safe

This depository style safe provides a quick option to collect and secure many items without having

to open the safe door. To use the depository door follow the steps below.

1. Locate and pull down on the depository door handle (Figure 1 and Figure 2).

2. Once open, place the item you would like to deposit onto the drawer (Figure 3).

3. Lift the depository door upward to the closed position and the contents will drop down to the

lower section of the safe (Figure 4).

Note: If using the depository safe for items other than cash / checks, it is recommended that fragile

or heavy items not be deposited as they may be damaged or cause damage. These items should

be placed in safe through the door.

USING THE DEPOSITORY DOOR

NOTES

Figure 1 Figure 2 Figure 3 Figure 4

Depository Safe

EMAIL: [email protected]

WEBSITE: www.honeywellsafes.com

ADDRESS: Consumer Assistance Dept.

LH Licensed Products, Inc.860 East Sandhill Avenue Carson, CA 90746 USA

TELEPHONE: US/Canada 1-877-354-5457 (Toll Free)

Mexico 01-800-288-2872 After English voice recording stops you must then enter 800-860-1677

to complete your call. (Toll Free)

Australia 0011-800-5325-7000 (Toll Free)

Germany/New Zealand 00-800-5325-7000 (Toll Free)

Other Countries XX*-310-323-5722 (Toll Charges Apply)

XX*- Dial U.S. Country Code rst

CALL CENTER HOURS: US/Canada 7am – 5pm (PST**) Mon – Fri (Subject to change)

CALL BACK HOURS: Other Countries 7am – 8pm (PST**) Mon – Fri (Subject to change)

PST**- Local time in Los Angeles, CA, USA

INTERNATIONAL CALL BACK HOURS:

If you need to speak with a consumer assistant and cannot contact us during the Call

Center hours above, please send an email or leave a telephone message, including your Name,

Telephone Number and the best time for us to contact you during the Call Back hours above and we

will make our every effort to contact you and help answer any of your questions or concerns.

* Insert correct Country Code

** Local Time based on Los Angles California USA

CONSUMER ASSISTANCE

Andere Handbücher für 5912

Inhaltsverzeichnis

Andere Honeywell Sicher Handbücher

Honeywell

Honeywell 2050 Bedienungsanleitung

Honeywell

Honeywell 5403 Bedienungsanleitung

Honeywell

Honeywell 2901 Bedienungsanleitung

Honeywell

Honeywell 2101 Bedienungsanleitung

Honeywell

Honeywell 5911 Bedienungsanleitung

Honeywell

Honeywell 2208 Bedienungsanleitung

Honeywell

Honeywell 5601 Bedienungsanleitung

Honeywell

Honeywell 5113 Bedienungsanleitung

Honeywell

Honeywell 2111 Bedienungsanleitung

Honeywell

Honeywell 2054D - 1 Hour Steel Fire Safe Anleitung zur Verwendung

Honeywell

Honeywell 1553 Bedienungsanleitung

Honeywell

Honeywell 5410 Anleitung zur Verwendung

Honeywell

Honeywell 3518 Bedienungsanleitung

Honeywell

Honeywell 2208 Bedienungsanleitung

Honeywell

Honeywell 5005 Anleitung zur Verwendung

Honeywell

Honeywell 1114 Bedienungsanleitung

Honeywell

Honeywell 2512 Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Honeywell

Honeywell 2074E Anleitung zur Verwendung

Honeywell

Honeywell 2605 Bedienungsanleitung

Honeywell

Honeywell 5101 Bedienungsanleitung

Honeywell

Honeywell 2510 Bedienungsanleitung

Honeywell

Honeywell 1532 Bedienungsanleitung

Honeywell

Honeywell 5002 Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Phoenix

Phoenix SS0100E Produktinformationsblatt

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung

Ankaro

Ankaro ANK EZ I Bedienungsanleitung

Phoenix

Phoenix FS1270E Series Bedienungsanleitung