Honeywell ADEMCO LYNXR Series Bedienungsanleitung



$'(0&2/<1;5/<1;5

  6HFXULW\6\VWHP

8VHU*XLGH

AWAY

OFF

STAY

AUX

LIGHTS ON

RECORD

LIGHTS OFF

STATUS

TEST

VOLUME

CODE

NO DELAY

BYPASS

PLAY

CHIME

FUNCTION

DELETE

ESCAPE

ADD

SELECT

ARMED READY

456

789

123

K5481V3 4/04 Rev. A

– 2 –

7$%/(2)&217(176

SYSTEM OVERVIEW ................................................................................................................................3

Features .................................................................................................................................................3

General Operation.................................................................................................................................5

Quick View of System Functions ..........................................................................................................7

About the Master Keypad .....................................................................................................................8

Master Keypad Definitions ...................................................................................................................9

About the Display and Indicators.......................................................................................................11

SECURING THE PREMISES ................................................................................................................12

Checking System Status .....................................................................................................................12

Arming the System..............................................................................................................................13

Entry/Exit Delays................................................................................................................................15

Disarming the System.........................................................................................................................16

Bypassing Protection Zones ................................................................................................................17

Panic Keys / Chime Mode ...................................................................................................................18

USER FUNCTIONS .................................................................................................................................19

Paging Feature ....................................................................................................................................19

“Follow Me” Announcement Feature..................................................................................................20

Using Powerline Carrier Device Commands (Lights On/Lights Off keys) .......................................22

Message Recording/Playback/Volume Control...................................................................................23

Aux Function .......................................................................................................................................25

Clock/Calendar ....................................................................................................................................26

Scheduling User Interface ..................................................................................................................28

Remote Phone Control Feature ..........................................................................................................33

FIRE ALARM SYSTEM...........................................................................................................................35

General Information............................................................................................................................35

National Fire Protection Association’s Smoke Detector Recommendations ....................................36

Emergency Evacuation........................................................................................................................37

SYSTEM FUNCTIONS ............................................................................................................................38

Security Codes .....................................................................................................................................38

Testing the System..............................................................................................................................39

Trouble Messages ................................................................................................................................40

Maintaining Your System...................................................................................................................41

SUMMARY OF AUDIBLE NOTIFICATION........................................................................................42

FCC STATEMENTS.................................................................................................................................43

OWNER’S INSURANCE PREMIUM CREDIT REQUEST ................................................................46

INDEX ........................................................................................................................................................48

LIMITATIONS OF THIS ALARM SYSTEM ........................................................................................50

ONE YEAR WARRANTY ........................................................................................................................51

Congratulations on your ownership of a Honeywell Security System. You have made a wise

decision in choosing it, for it represents the latest in security protection technology today.

Honeywell is the world's largest manufacturer of security systems, and millions of premises

are protected by Honeywell products.

²²

6<67(029(59,(:

)HDWXUHV

*HQHUDO,QIRUPDWLRQ

This system offers you three forms of protection: burglary, fire, and emergency, depending on the

configuration of your system. The system consists of a master keypad for controlling system operation,

various wireless sensors that provide perimeter and interior burglary protection, and optional smoke or

combustion detectors to provide early fire warning. In addition, optional wireless keypads may have

been installed to allow you to control the system away from the master keypad.

The system uses microcomputer technology to monitor all protection zones and system status, display

appropriate information on the keypad display, and initiate appropriate alarms. Your system may also

have been programmed to automatically send alarm or status messages over the phone lines to a

central alarm monitoring station.

The user features of this security system are listed below. Ask your installer which features

have been programmed for your system.

•STAY and AWAY arming modes: By using these modes you can protect either the perimeter only,

or the entire premises.

•3 panic key functions: Designated keys allow you to manually activate fire, personal emergency, or

silent alarms. Refer to the PANIC KEYS section for detailed information.

•Paging feature: If programmed by your installer this feature alerts you to certain system

conditions by displaying code numbers that indicate the type of condition that has occurred. In

addition, pressing the AUX key can send a predefined message to your pager, if programmed to do so

(see AUX key function below). Refer to the PAGING FEATURE section for detailed information.

•Follow me system announcements: Allows the LYNXR/LYNXR24 to dial a number, programmed

by your installer, and deliver system announcements.

•Follow me reminder announcements: Allows the LYNXR/LYNXR24 to dial a number, that you

have specified, at a programmed time and day and deliver a message programmed by your installer.

•Real-time clock: Keypad displays current time. Refer to the CLOCK/CALENDAR section for

procedures for setting the time.

•Voice announcement of system status: The master keypad’s built-in speaker announces system

status at the press of a key. Refer to the CHECKING SYSTEM STATUS section for detailed

information.

•Message center: The system allows recording and play back of brief messages. Refer to the

RECORDING/PLAYBACK MESSAGES section for procedures.

•Device activation: Designated keys allow you to turn lights and/or other devices on and off. In

addition, some devices (e.g., a light) may be programmed to activate automatically as a result of a

system event such as an alarm or trouble condition. Refer to the USING POWERLINE CARRIER

DEVICE COMMANDS section for detailed information.

²²

6<67(029(59,(:

)HDWXUHV

•AUX key function: Designated key lets you activate a predefined series of keystrokes with a single

press of the

$8;

key plus user code, or manually send a pager message. It will also allow you to

manually send a voice message to phone number that has been programmed by your installer. Ask

your installer which of these features has been assigned to the

$8;

key in your LYNXR/LYNXR24.

Refer to the AUX FUNCTION section for detailed information.

•Scheduling feature: Allows you to schedule the automatic activation or deactivation of X-10

devices or program events (e.g. alarm clock, reminder, and latch key).

• Phone Control: Provides a remote interactive phone capability that permits access to the security

system from any off-site touch-tone telephone.

• Security Codes: The system is capable of supporting an Installer code, Master user code and six

additional User codes. Refer to the SECURITY CODES section for detailed information.

²²

6<67(029(59,(:

*HQHUDO2SHUDWLRQ

=RQHV

Your system's sensing devices have been assigned to various "zones." For example, the sensing device

on your entry/exit door may have been assigned to zone 01, sensing devices on windows in the master

bedroom to zone 02, and so on. These numbers appear on the display when an alarm or trouble

condition occurs.

8/

/<1;5/<1;5 LV QRW LQWHQGHG IRU 8/ +RXVHKROG )LUH DSSOLFDWLRQV XQOHVV D 

KRXU EDFNXS EDWWHU\ 31 /<1;5&+.,7+& LV LQVWDOOHG

)LUH3URWHFWLRQ

The fire protection portion of your security system (if used) is always active and will sound an alarm if

a fire condition is detected. Refer to the FIRE ALARM SYSTEM section for important information

concerning fire protection, smoke detectors and planning emergency exit routes from the premises.

%XUJODU\3URWHFWLRQ

Your system provides two modes of burglary protection: STAY and AWAY. STAY mode protects the

perimeter only, allowing you to freely move within inside the premises. AWAY mode protects the entire

system. Both modes provide an entry delay time that allows you to reenter the premises without

setting off an alarm. For additional security, you can turn the entry delay off when arming the system

by using the

12 '(/$<

key in combination with the desired arming key. The system also allows you

to bypass selected zones before arming the system, if desired. Refer to the BYPASSING PROTECTION

ZONES section. The system also provides a CHIME mode, for alerting users to the opening of

protected doors and windows while the system is disarmed.

You must turn on ("arm") the burglary protection portion of your system before it will sense burglary

alarms. To arm the system, enter your user code then press the desired arming key (AWAY or STAY).

Refer to the ARMING THE SYSTEM section for detailed procedures and information.

6HFXULW\&RGHV

At the time of installation, you were assigned a personal 4-digit security or “master user”code. You

must enter the user code when arming and disarming the system, and when performing other system

functions. As an additional security feature, other users who do not need to know your code can be

assigned up to 6 different security codes. Refer to the SECURITY CODES section for procedures on

adding security codes to the system.

$ODUPV

When an alarm occurs, the keypad and external sounders will sound for about 15-seconds, and the

keypad will display the zone(s) causing the alarm. After 15-seconds, the siren stops temporarily and

voice announcements of the zones in alarm begins. When these zones have been announced, the siren

sounds again and the cycle repeats itself, until the system is disarmed (code + OFF) or until alarm bell

timeout occurs. If your system is connected to a central monitoring station, an alarm message will be

sent. To stop the alarm sounding, simply disarm the system. The zone(s) causing the alarm remain

displayed indicating memory of alarm. Refer to the DISARMING THE SYSTEM section for

information about clearing the memory of alarm display.

²²

48,&.9,(:2)6<67(0)81&7,216

NOTE: = Boxes represent the entering of your 4-digit user code.

SECURITY FUNCTIONS

Checking system status: --------------

67$786

To arm in STAY mode: ----------------

 67$<

To restart exit delay: -------------------

67$<

RQO\ LI SURJUDPPHG DQG V\VWHP DUPHG LQ 6WD\ PRGH

To arm in AWAY mode: ---------------

 $:$<

To arm with NO DELAY: -------------

 $:$< RU 67$<  12 '(/$<

To arm if Quick Arm is active: -----

$:$< RU 67$< KROG GRZQ IRU DW OHDVW  VHFRQGV

To disarm system and silence alarms:

 2))

To bypass a zone(s): ---------------------

 %<3$66  GLJLW ]RQH QXPEHUV

To turn Chime mode on or off: -----

)81&7,21  &+,0(

6HFXULW\ FRGH LV QRW UHTXLUHG LI 4XLFN $UP LV DFWLYH ,QVWHDG SUHVV DQG KROG GRZQ WKH 67$< RU $:$< NH\

MESSAGE CENTER

To record a message: -------------------

)81&7,21  5(&25'

To stop recording before end of 85 secs:

2))

To play back a message: ---------------

)81&7,21  3/$<

To skip a message: ---------------------------

✻

To delete all messages: --------------------

)81&7,21  '(/(7(

GXULQJ PHVVDJH UHSOD\

VOLUME ADJUSTMENT

To adjust message playback/announcement volume:

)81&7,21  92/80(  >@ RU >@

To mute system announcements: -

)81&7,21  92/80(  2))

To restore/unmute announcements:

)81&7,21  92/80(  >@ RU >@

REMOTE PHONE CONTROL OPERATION

To remotely disarm: ---------------------

 >@

To remotely arm in AWAY mode: -

 >@

To remotely arm in STAY mode: --

 >@

To remotely arm in AWAY or STAY mode with NO DELAY:

 >@ RU >@  >@

To remotely activate X-10 devices 1-6: ---------

>@  >@  GHYLFH QR



To remotely activate X-10 devices 7 & 8: -----

 >@  >@  GHYLFH QR

To remotely deactivate X-10 devices 1-6: -----

>@  >@  GHYLFH QR

²²

48,&.9,(:2)6<67(0)81&7,216

To remotely deactivate X-10 devices 7 & 8:

 >@  >@  GHYLFH QR

To remotely bypass a zone: ----------

 >@  ]RQH QR

To remotely activate forced bypass: ------------

 >@  >@

To remotely check system status:

>@

To hang up: ----------------------------------

 >@

,I IRUFHG E\SDVV ZDV HQDEOHG E\ \RXU LQVWDOOHU

OTHER FUNCTIONS

To set the time and date: -------------

 )81&7,21  >@

To set scheduling: ------------------------

 )81&7,21  >@

To activate X-10 devices 1-6: --------

)81&7,21  /,*+76 21  GHYLFH QXPEHU

To activate X-10 devices 7 & 8: -----

 )81&7,21  /,*+76 21  GHYLFH QXPEHU

To deactivate X-10 devices 1-6: ----

)81&7,21  /,*+76 2))  GHYLFH QXPEHU

To deactivate X-10 dev. 7 & 8: -------

 )81&7,21  /,*+76 2))  GHYLFH QXPEHU

To add a user code: ---------------------

  &2'(  XVHU QR  XVHU FRGH

To delete a user code (except Master Code):

  &2'(  XVHU QXPEHU 

To turn Test mode on: ------------------

 7(67

To turn Test mode off: -----------------

 2))

To use the defined AUX function: -

3UHVV DQG KROG $8; NH\  VHFRQGV  EHHSV 

To send message to pager: ------------

3UHVV DQG KROG $8; NH\  VHFRQGV  EHHSV

To program “Follow Me”reminder phone #:

 )81&7,21  >@  (QWHU XS WR 

GLJLWV

To delete “Follow Me”reminder phone #:

 )81&7,21  >@

 2QO\ WKH PDVWHU FRGH FDQ EH XVHG WR DGG RU GHOHWH DQRWKHU XVHU FRGH

²²

6<67(029(59,(:

$ERXWWKH0DVWHU.H\SDG

*HQHUDO

IMPORTANT: If the keypad beeps rapidly upon entering the premises, an alarm has occurred during

your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY and CONTACT

THE POLICE from a nearby safe location.

The keypad allows you to control all system functions. The keypad features telephone-style keys and a

Liquid Crystal Display (LCD), which shows the nature and location of all occurrences.

123

456

789

RECORD VOLUME PLAY

LIGHTS ON TEST BYPASS

LIGHTS OFF CODE CHIME

STATUS NO DELAY FUNCTION

ARMED READY

OFF

AWAY

STAY

AUX

01009-023-V1

ESCAPE

DELETE

ADD

SELECT

The keypad also features a built-in sounder, which will sound during alarms and troubles. The keypad

also "beeps" during certain system functions, such as during entry/exit delay times, in Chime mode,

and when depressing any of the keys (to acknowledge the key press). In addition, a built-in speaker

announces system status.

The voice announcement volume is adjustable, however the “beeps”that sound in response to alarms

always sound at the maximum volume level. All other “beeps”(trouble, chime, exit/entry, etc) can be

set to either low or high volume.

–9 –

6<67(029(59,(:

0DVWHU.H\SDG'HILQLWLRQV

456

789

RECORD VOLUME PLAY

ARMED READY

ESCAPE

DELETE

ADD

SELECT

OFF

AWAY

STAY

AUX

LIGHTS ON TEST BYPASS

LIGHTS OFF CODE CHIME

FUNCTION

NO DELAYSTATUS

01009-022-V1

IMPORTANT!

When you use the keypad to enter codes and commands, press the keys within 2 seconds of one another.

If 2 seconds elapse without a key depression, the entry is aborted and must be repeated from its

beginning.

NOTE: Different timeouts may occur when defining auxiliary functions and setting the real-time clock.

Note: The system functions described below are for reference only and require additional key entries to activate.

1. DISPLAY WINDOW: Liquid Crystal Display

(LCD). Displays protection point identification

and system status, messages, and user

instructions.

2. ARMED INDICATOR: (RED) Lit when the

system has been armed (STAY, AWAY, NO

DELAY). Blinks when armed and fault exists.

3. READY INDICATOR: When lit, indicates

system is ready to be armed; blinking indicates

system is not ready (a zone is open).

3/$<

KEY: Announces a user’s message if one

was previously recorded. See RECORD function.

Used to adjust volume of voice messages.

–10 –

6<67(029(59,(:

0DVWHU.H\SDG'HILQLWLRQV

7(67

KEY: Tests the system and alarm

sounder.

%<3$66

KEY: Removes individual protection

zones from being monitored by the system.

Displays currently bypassed zones.

Used to adjust volume of voice messages.

&2'(

KEY: Allows entry of additional user

codes that can be given to other system users.

&+,0(

KEY: Turns the Chime mode on and

off. When on, any entry through a protected

delay or perimeter zone while the system is

disarmed will cause a tone and voice descriptor

to sound at the keypad.

9. INTERNAL SOUNDER: Source of alarm sounds

(see "Summary of Audible Notifications" section).

10.

)81&7,21

KEY: Allows alternate key

functions. It is used as a “repeat”key during

Clock/Calendar setting.

11.

12 '(/$<

KEY: Used with STAY or AWAY

function to eliminate the entry delay. Alarm

sounds immediately if entry is opened.

12.

67$786

KEY: When pressed prior to arming,

the keypad will display all open zones, and will

announce system status.

13.

/,*+76 21

/,*+76 2))

KEYS: Turns

lights or other devices on or off, if programmed by

the installer.

14.

$8;

6(/(&7

KEY: Can be programmed

to either perform a predefined function or to send

a preset message to a pager or a “Follow Me”

system phone number.

15.

67$<

'(/(7(

KEY: Arms the perimeter

burglary protection, guarding protected doors,

windows and other perimeter protection points, and

sounds an alarm if one is opened. Interior protection

is not armed, which allows movement within your

house without causing an alarm. Entrance can be

made through an entry delay zone without causing an

alarm if the system is disarmed before the entry delay

time expires. Used to delete messages.

16.

$:$<

$''

KEY: Completely arms both

perimeter and interior burglary protection for backup

protection by sensing an intruder's movements

through protected interior areas as well as guarding

protected doors, windows, etc. Entrance can be made

through an entry delay zone without causing an

alarm if the system is disarmed before the entry delay

time expires. Used to accept “Follow Me”phone

number and Clock/ Calendar mode entries.

17.

2))

(6&$3(

KEY: Disarms the burglary

portion of the system, silences alarms and audible

trouble indicators, and clears alarm trouble display

after the problem has been corrected. Used to

exit/abort “Follow Me”phone number and

Clock/Calendar mode.

18. MICROPHONE: Used to record personal messages

up to 85 seconds long.

19. SPEAKER: Source of audible internal warning and

confirmation sounds, status announcements, as well

as alarms (see "Summary of Audible Notifications").

20. RECORD: Activates the recording function to record

personal messages.

21. VOLUME: Sets the volume of system announcements

and status beeps.

–– KEYS 0-9: Used to enter your individual security

access code(s).

Andere Handbücher für ADEMCO LYNXR Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Sicherheitssystem Handbücher

Honeywell

Honeywell ADEMCO 745VSD3 Montageanleitung

Honeywell

Honeywell Friedland FGGA04 Series Bedienungsanleitung

Honeywell

Honeywell Apex Destiny 4100 Bedienungsanleitung

Honeywell

Honeywell ADEMCO LYNXR-ENSIA Bedienungsanleitung

Honeywell

Honeywell Ademco VISTA-50P Betriebsanleitung

Honeywell

Honeywell NOTIFIER PAN1-PLUS-EN3 Bedienungsanleitung

Honeywell

Honeywell LYNX TOUCH L5200 Betriebsanleitung

Honeywell

Honeywell LYNX Bedienungsanleitung

Honeywell

Honeywell Gamewell-FCI E3 Series Bedienungsanleitung

Honeywell

Honeywell Galaxy 2-44+ Bedienungsanleitung

Honeywell

Honeywell Vista 21IP Bedienungsanleitung

Honeywell

Honeywell Informa Bedienungsanleitung

Honeywell

Honeywell LYNX Touch Series Montageanleitung

Honeywell

Honeywell Ademco 8132-i Bedienungsanleitung

Honeywell

Honeywell HS321S Bedienungsanleitung

Honeywell

Honeywell L5200 Series Bedienungsanleitung

Honeywell

Honeywell Ademco VISTA-20P Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA-40 Bedienungsanleitung

Honeywell

Honeywell LYNX Touch L5210 Series Bedienungsanleitung

Honeywell

Honeywell GENT Xenex Produkthandbuch

Honeywell

Honeywell LYNX Touch Security System Bedienungsanleitung

Honeywell

Honeywell ADEMCO 4110XM Bedienungsanleitung

Honeywell

Honeywell LYNX TouchL5200 Series Bedienungsanleitung

Honeywell

Honeywell VISTA 21iPLTE Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung

DSC

DSC PC 4010 Betriebsanleitung

UniPOS

UniPOS 6202L Bedienungsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Rondish

Rondish Nexus Bedienungsanleitung