Honeywell SD500-PSDA Bedienungsanleitung

I56-3632-003/151177 ECN: 2017-4407

I56-3632-003

SD500-PS and SD500-PSDA

Addressable Fire Pull Station

Installation Instructions

The SD500-PS is an single action addressable

fire pull station and the SD500-PSDA is a dual

action addressable fire pull station. The SD500-

PS and SD500-PSDA are a normally open

initiating point that is compatible with

Honeywell Silent Knight and Farenhyt Series

addressable fire alarm control panels (FACP).

The SD500-PS/PSDA are designed for indoor

use in non-explosive environments. Used to

activate a non-coded alarm instantly.

An on-board status LED is visible from the front

of the pull station. The LED flashes to indicate

proper communication with the FACP

(approximately every 30 seconds).

Specifications

Operation

To activate the fire pull station:

1. Grab the top of the pull station where it is

labeled “PULL”.

2. Pull the cover plate out and down.

To reset the pull station:

1. Insert key into the lock.

2. Turn the key clockwise.

3. Close the cover plate.

4. Turn the key counter clockwise.

Wiring to the SD500-PS/PSDA

Wire the SD500-PS as shown in Figure 1.

Figure 1: Fire Pull Station Wiring

Mounting the SD500-PS/PSDA

The pull station mounts to a standard single gang

electrical switch box or a surface mount back

box P/N PS-SMBB (sold separately). See Figure

Parameter Rating

Max. Line resistance 50

Max. Alarm

Current One device in

alarm 23mA. 46

mA for two

devices in alarm.

.5 mA for each

additional device in

alarm.

Max. Voltage 33 V

Operating Temperature 0° to 49° C

(32° to 120° F)

Dimensions 5-1/8” H x 3-1/16” W x 1.5” D

Parameter Rating

Supervised

Power Limited

I56-3632-003 / 151177

ECN: 2017-4407

Silent Knight®, Farenhyt®, and Honeywell®are registered trademarks of Honeywell International, Inc.

Figure 2: Mounting the Fire Pull Station

Installing The SD500-LK

The SD500-LK is used to convert the SD500-PS

(single action pull station) to a SD500-PSDA

(Dual action pull station. Refer to Figure 3 to

install the SD500-LK Dual Action Conversion

Kit.

Figure 3: SD500-LK Installation

PS-SMBB

Mounting

Holes

Single Gang

Electrical

Switch Box

To meet ADA requirements the

access and no more than 54" from

pull station must be mounted 48"

from the floor for wheelchair forward

the floor for wheelchair side access

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Sicherheitssystem Handbücher

Honeywell

Honeywell Galaxy 3-48C Betriebsanleitung

Honeywell

Honeywell Ademco VISTA-20P Betriebsanleitung

Honeywell

Honeywell LYNX Touch Security System Bedienungsanleitung

Honeywell

Honeywell HS-6270 Bedienungsanleitung

Honeywell

Honeywell 5816 WMWH Bedienungsanleitung

Honeywell

Honeywell Fire-Lite Alarms ANN-80 Series Technisches Handbuch

Honeywell

Honeywell L5200 Series Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA-10P Montageanleitung

Honeywell

Honeywell ADEMCO 6150V Bedienungsanleitung

Honeywell

Honeywell Optiflex Interactive Bedienungsanleitung

Honeywell

Honeywell VISTA 15P - Ademco 6 Zone Control Panel Betriebsanleitung

Honeywell

Honeywell L5200 Series Montageanleitung

Honeywell

Honeywell System 1500e Bedienungsanleitung

Honeywell

Honeywell Evohome Bedienungsanleitung

Honeywell

Honeywell LYNX Touch L5210 Series Bedienungsanleitung

Honeywell

Honeywell sixsiren Bedienungsanleitung

Honeywell

Honeywell 2202 Bedienungsanleitung

Honeywell

Honeywell VISTA-128FBP Bedienungsanleitung

Honeywell

Honeywell L5200 Series Betriebsanleitung

Honeywell

Honeywell LYNX Bedienungsanleitung

Honeywell

Honeywell LXL-1000 Bedienungsanleitung

Honeywell

Honeywell VISTA-128BPTSIA Bedienungsanleitung

Honeywell

Honeywell ADEMCO VISTA SERIES Montageanleitung

Honeywell

Honeywell VISTA-21iP Montageanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung