Hoover HTC 243 Bedienungsanleitung
3
EN
This Instruction Manual
contains everything you need to
know about the everyday
running of your machine. Keep
it for future reference.
An Installation and
Maintenance Manual is also
provided which you should
consult during the installation
and routine maintenance of
your washing machine. The ma-
nual also contains information
about possible working
problems, advice about the
wash load, an explanation of
label symbols and hints about
how to remove stubborn stains.
INTRODUCTION
Read this manual carefully as it offers practical advice to help you get the most from your
washing machine.
1.- CONTROL PANEL
2.- LID
3.- DRUM
4.- DETERGENT COMPARTMENT
5.- FILTER DOOR
6.- FILTER
7.- WHEEL TROLLEY
When contacting a HOOVER or one of its Technical Assistance
Centre always refer to the model (see control panel) and the
registration and series numbers which are indicated at the bottom of
the machine under the lower panel or on the warranty certificate. That
is to say, everything that appears in the box.
Providing this information will ensure a faster and more efficient service.
4
INDEX
GUARANTEE ................................................................................
5
TECHNICAL DATA ..........................................................................
6
OPENING THE LID – LOADING ...................................................
7
DETERGENT DISPENSER ...........................................................
8
ACTIVE SYSTEM ...........................................................................
9
AUTOMATIC ECONOMY SYSTEM................................................
9
PROGRAMME SELECTION ..........................................................
9
CONTROL DESCRIPTION .........................................................
10
TABLE OF PROGRAMMES .......................................................
13
page
5
B
A
GUARANTEE
1.
The appliance comes with a guarantee certificate.
2.
Complete part Aand keep it in a safe place. It should
be presented to the Technical Assistance Centre in
the event of a repair being necessary along with the
legal receipt issued by the dealer on purchase.
3.
Do not forget to send part Bof the Guarantee
Certificate to be validated within 15 days of purchase.
6
DONNÉES TECHNIQUES
Load capacity..............................................................................
kg.
Voltage ..........................................................................................
V.
Wash motor power rating .............................................................
W.
Spin motor power rating...............................................................
W.
Electropump power rating ............................................................
W.
Heating element power rating ......................................................
W.
Max. power input .........................................................................
W.
Fuse ..............................................................................................
A.
Water pressure ........................................................................
MPa
Spin speed ....................................................................
r.p.m./min
Water consumption (60º C programme) ......................................
lit.
Energy consumption (60º C programme) / 4,5 kg ...................
kWh
Energy efficiency rating ....................................................................
4,5
230
125
400
30
1.950
2.200
10
0,05 min.
0,8 max.
1200
48
0,85
A
HTC 243
7
OPENING THE DRUM
1.
Lift the lid (A) and open completely. Next open the drum
door following these instructions:
2.
Press catch (B) and kept it pressed down.
Press the first shutter (C) to unlock the two shutters (C)
and (D).
3.
Open the second shutter (D). Open the first shutter (C).
Place the washing in the drum.
4.
Close the first shutter (C).
Close the second shutter (D) so that the catch on the
first shutter fits correctly into the slot. Release.
5.
Ensure that both shutters are perfectly aligned and properly
closed.
IMPORTANT: IT IS IMPORTANT TO MAKE SURE THAT
THE DRUM IS CAREFULLY CLOSED BEFORE
OPERATING THE MACHINE, OTHERWISE THE
MACHINE OR LAUNDRY COULD GET DAMAGED.
2 min.
A
FRONT OF THE
WASHING MACHINE
C
B
D
WASHING MACHINE
LID
FRONT OF THE
WASHING MACHINE
D
C
FRONT OF THE
WASHING MACHINE
D
C
FRONT OF THE
WASHING MACHINE
C
D
IMPORTANT: A SPECIAL
SAFETY DEVICE PREVENTS
THE LID FROM BEING
OPENED IMMEDIATELY
AFTER THE WASH HAS
FINISHED. ONCE THE SPIN
CYCLE HAS FINISHED, WAIT
FOR 2 MINUTES BEFORE
TRYING TO OPEN THE LID.
8
DETERGENT DISPENSER
The detergent dispenser is divided into 4 compartments:
• Compartment I, is for prewash powder detergent. The recommended quantity is
60 gm of detergent (for 4,5 kg of laundry).
• Compartment II, is for wash powder detergent. The recommended quantity is 120
gm of detergent (for 4,5 kg of laundry).
• The compartment is for bleach. The recommended quantity is 7 cl.
• The compartment is for fabric conditioners, scenting agents and special
additives. The recommended quantity is 5 cl.
The detergent compartment has two guidance lines:
• RECOMMENDED (lower line). This indicates the recommended level for the prewash
and wash compartments.
• MAX. This indicates the maximum level which should never be exceeded.
MAXIMUM
(wash)
MAXIMUM
(bleach and scenting agent)
MAXIMUM
(prewash)
RECOMMENDED
9
ACTIVE SYSTEM
The Active system owes its efficiency to its capacity to take advantage of all the force of the
water. During the washing phases the water in the drum is pumped towards an injector
located in the drum which injects a powerful water jet onto the wash. This action with an
increase of rotation speed up to 100 revolutions guarantees an optimum quality of wash
and more thorough rinsing.
AUTOMATIC ECONOMY SYSTEM
With this system the machine adjusts the amount of water used to wash and rinse according
to the load. This means that water (and therefore power) can be saved without affecting
wash and rinse quality, because the machine will always use the right amount for the load it
contains. Excellent results are therefore ensured at lower cost, making the machine more
environmentally friendly.
PROGRAMME SELECTION
To select a programme:
• Programmes are selected by means of the corresponding control knob (A). See the
table of programmes.
• Select the spin speed by means of the corresponding control knob.
• Select the different options available by pressing the corresponding buttons.
•Hold down the Start/Pause button until one of the lamps on the time remaining to
end of cycle display lights up.
•Due to the design of the electronic washing machine, the programme may take up
to one minute to start up after one of the time remaining to end of cycle lamps
ligths up.
10
CONTROL DESCRIPTION
PROGRAMME / TEMPERATURE SELECTOR ..........................
TIME REMAINING TO END OF CYCLE ....................................
SPIN SELECTOR CONTROL ....................................................
EXTRA RINSE BUTTON ............................................................
TIME SAVER BUTTON...............................................................
FAST IRON BUTTON .................................................................
PRE-WASH BUTTON .................................................................
DOOR SECURE INDICATOR LAMP ..........................................
START/PAUSE BUTTON ...........................................................
GUIDE MARK .............................................................................
HTC 243
A
V
B
C
D
E
F
G
H
p
11
USING THE SELECTORS
A
. ROGRAMME / TEMPERATURE SELECTOR
To select the desired washing programme/temperature, turn
this selector until the number or symbol for the programme
desired is opposite the guide mark (p). Temperature
selection depends on the programme selected.
To modify settings or change programmes once the
programme has started, proceed as follows:
-Press the start/pause button until the pilot light showing
the end of the time remaining to end of cycle lights up.
-Release the button. After a few seconds the lamp on the display will go out.
-Select the desired programme.
-Hold down Start/Pause again until one of the lamps on the the time remaining to
end of cycle display lights up.
-The machine will then run through the new programme selected.
To add more clothes during a programme, proceed as follows:
-Hold down Start/Pause until one of the lamps on the time remaining to end of cycle display
flashes.
-Wait until the Door Secure indicator goes out, open the door and add more clothes to the
wash.
-Close the drum door and the outer cover tight.
-Press Start/Pause.
V
.TIME REMAINING TO END OF CYCLE
This feature displays the estimated maximum time remaining
to completion of the cycle.
B.
SPIN SELECTOR
To select the spin speed, turn the selector until the mark for
the desired rpm is opposite the guide mark (p).
The final spin for resistant fabrics (indicated as COTTON)
will be at the selected speed.
In programmes for synthetic fabrics (SYNTHETICS)
intermediate spins are at 400 rpm, and the final spin is at
800 rpm.
In the DELICATES programme there are no intermediate spins, and the final spin is at 400
rpm.
In the WOOL programmes (30º and Cold Wash) there are no intermediate spins, ant the
final spin is at 800 rpm.
For specific programmes:
The 29´/44´programme runs one intermediate spin at 400 rpm and a final spin at 800 rpm.
In the program HAND WASH there is no spin-dry during the washing phases and the final
spin-dry is done at 800 rpm.
To cut out spinning altogether, match the No Spin symbol to the guide mark.
THIS CONTROL CAN BE TURNED BOTH WAYS.
p
p
12
USING THE SELECTORS
The functions associated with each button work only in those programs with
which they are compatible.
C. EXTRA RINSE BUTTON
This causes more water to be used in rinsing. It helps prevent skin irritation in
people particularly sensitive to washing powders. We also recommend using
EXTRA RINSE with heavily soiled washing which requires large amounts of
washing powder, and when washing padded fabrics which may retain washing
powder.
D. TIME SAVER BUTTON
This works in cotton and synthetics programmes. Wash time can be cut by as
much as 50 minutes, depending on which programme is selected.
E.
FAST IRON BUTTON
This works only with programmes for synthetics, delicates, wool and some
special programmes. When this setting is used for delicates, wool or hand
wash programmes, the machine stops and leaves the washing in water inside
the drum. This makes for fewer wrinkles and easier ironing. To resume the
wash cycle, press FAST IRON. If this setting is used in the synthetics cycle,
the programme ends with a short spin at very low speed. The washing then
remains in the drum but without excessive wrinkling. If a spin cycle is required,
select an appropriate speed (see Programme Guide) and remove the washing
when the programme ends.
F.
PRE-WASH BUTTON
This is useful especially for heavily soiled washing. It can be used before the
main wash programme is selected. Pour the washing powder for the pre-
wash into the compartment marked “I” (for more information see “Detergent
Dispenser” below). We recommend using only 20% of the amount
recommended in the washing powder instructions, with no fabric softener.
G.DOOR LOCKED
H.START/PAUSE BUTTON
Inhaltsverzeichnis
Andere Hoover Waschmaschine Handbücher
Hoover
Hoover AM 1243 S Bedienungsanleitung
Hoover
Hoover DXA 175AH/1-AUS Bedienungsanleitung
Hoover
Hoover DWT L68AIW3/1-80 Bedienungsanleitung
Hoover
Hoover SE160 E Bedienungsanleitung
Hoover
Hoover HPA 135 Bedienungsanleitung
Hoover
Hoover H-WASH 500 HWPD 414AMBC/1-S Bedienungsanleitung
Hoover
Hoover NDE C8TBBEX-S Bedienungsanleitung
Hoover
Hoover H-WASH 500 HWPD 69AMBC/1-S Bedienungsanleitung
Hoover
Hoover WDWFT4138AH Bedienungsanleitung
Hoover
Hoover Auto-Washer 1300 AC180 Bedienungsanleitung
Hoover
Hoover EY 1281DE/1-S Bedienungsanleitung
Hoover
Hoover Six. Express 1300 WDM130 Bedienungsanleitung
Hoover
Hoover Nextra HNL7166 Bedienungsanleitung
Hoover
Hoover HTC 120 AA Bedienungsanleitung
Hoover
Hoover DYN DP Bedienungsanleitung
Hoover
Hoover H-WASH 700 Bedienungsanleitung
Hoover
Hoover HWP 49AMBC7/1-S Bedienungsanleitung
Hoover
Hoover DYNS P8 Bedienungsanleitung
Hoover
Hoover HTV 913 Fehlerbehebungshandbuch
Hoover
Hoover SIX.Handwash 1200 AL120 Bedienungsanleitung
