Hoover HWF5513E Bedienungsanleitung

HWF5513E

40000400 English.qxd 26/08/2003 13:14 Page 1

English 2

Français 34

English

Contents Page

Introduction 3

General delivery notes 4

Safety notes 4

Quick start 6

Installation & testing 7

Useful advice for the user 12

Description of controls 13

Detergent drawer 15

Detergents, washing aids and amounts to use 16

Programme selector 19

The main wash 20

Consumption data 24

Programme Table 25

Cleaning and routine maintenance 27

Trouble shooting 29

Power failure 31

Technical data 32

Customer service 33

40000400 English.qxd 26/08/2003 13:14 Page 2

Introduction

Please read and follow these instructions carefully and operate the machine

accordingly.

Keep all documentation in a safe place for future reference or for any future

owners.

Note: this machine is solely for domestic use, i.e. to

wash, rinse and spin dry household textiles and

garments.

Notes on disposal

All packaging materials used are environmentally-friendly and recyclable. Please

help dispose of the packaging via environmentally-friendly means.

Your retailer or local council will be able to give you

details of current means of disposal.

Appliances that have reached the end of their useful life are not worthless

rubbish! Valuable materials can be salvaged from an old appliance via scrap

reprocessing.

Note: to ensure safety when disposing of an old

washing machine disconnect the mains plug from the

socket, cut the mains power cable and destroy this

together with the plug. To prevent children shutting

themselves in the machine break the door hinges or

the door lock.

40000400 English.qxd 26/08/2003 13:14 Page 3

General delivery notes

Please check that the following items are delivered with the appliance:

– Instruction manual

– Guarantee card

– Blanking plug

– Inlet hoses & bracket

– Base panel and x2 push clips

Check that no damage has occurred during transit. If it has, call the GIAS Service,

Hoover Service or an authorised Hoover Dealer. Please see Customer Service.

Safety notes

Note: before carrying out any cleaning or maintenance

of the washing machine.

A) Disconnect the plug from the mains supply.

B) Turn off the water supply.

C) Ensure that the mains power supply is earthed, if not, seek assistance from a

qualified electrician. This appliance must be earthed.

D) Do not touch the appliance when hands or feet are wet or damp. Do not use

the appliance with bare feet.

E) The use of adapters, multiple connectors and/or extensions is not

recommended.

F) Caution: water temperature can reach 90°C during

the whites wash cycle and as a result the door glass

may get very hot.

40000400 English.qxd 26/08/2003 13:14 Page 4

G) Check there is no water visible in the drum before opening the door.

H) Do not allow children or unauthorised persons to use the appliance without

supervision.

I) Do not pull the power cable or the appliance itself to remove the plug from the

socket.

J) The appliance must not be exposed to weather conditions (rain, direct sun,

etc...).

K) When moving the appliance never lift it by the controls, the detergent drawer,

the hoses or the power cable.

To avoid damaging the door when moving the appliance never rest the door

against objects e.g a trolley.

L) IMPORTANT!

If the appliance is installed on a carpeted floor ensure that the ventilation

through the base of the appliance is not obstructed.

M) When lifting the machine always use two people to help avoid back injuries.

N) If the appliance is not running properly or breaks down, switch it off,

disconnect the plug from the socket, turn off the water supply and do not

tamper with the appliance.

Consult Hoover or GIAS Service for possible repair. Failure to comply with the

above can compromise the safety of the appliance.

O) If the appliance’s power cable is damaged it must be replaced by a special

cord which is only available from GIAS Service, Hoover Service or an

authorised Hoover dealer.

P) After the machine has been installed, ensure that the mains plug and water

supply valves are easily accessible.

Q) Glass fibre curtains should never be put into this machine.

R) Lint or fluff must not be allowed to collect on the floor around the outside of

this machine.

S) Always ensure that the door locked indicator neon has switched itself off

before opening the door. By doing so the machine is allowed to cool down

before the laundry is handled.

T) Always ensure that the base panel is fitted to the machine.

40000400 English.qxd 26/08/2003 13:14 Page 5

After washing

– Wait about two minutes for the door locking device

to disengage. The door locked neon will go out

– Switch off the washing machine by turning the

programme knob to the “OFF” position

– Open the door and remove the laundry

Quick start

Washing

– Open the door with the DOOR OPEN button

– Select laundry and put it in the machine

– Close the door

– Put detergent in the dispenser compartments, compartment I for prewash and

compartment II for all other programmes.

– Select programme by turning the programme knob.

– Select any function buttons required and then press the start/pause button.

Drying

This washer dryer gives you the opportunity to wash and dry a complete 5kg

cotton load in one cycle. Select the appropriate drying programme via the large

programme knob ie, high heat (cottons), low heat (synthetics). Always

read the wash care label on laundry to ensure that it is suitable for tumble drying.

– Select the drying time via the drying time dial until the required time aligns

with the indicator on the dial.

– Switch on the machine by pressing the start/pause button.

If the drying time is selected before the wash cycle is completed the machine will

automatically commence the drying programme.

40000400 English.qxd 26/08/2003 13:14 Page 6

Remove the machine from the packaging - close to where it will finally

be positioned - and proceed as follows:

On the back of the machine

1) Remove the central screw A and

side screws B and pull out the transit

bracket C along with the red locator.

2) Tilt the machine forward and remove

the polystyrene spacers.

3 Cover the central hole using the cap

enclosed in the instructions bag.

4) Adjust the two feet at the front to

level the machine.

5) Tilt the machine forward and locate

the base panel by (1) removing the

paper backing from the adhesive tape,

(2) locate the base panel in the front of the

machine, (3) offer the base panel up to the

base of the washing machine and locate

the two push clips.

Installation & testing

40000400 English.qxd 26/08/2003 13:14 Page 7

Note: we recommend you keep the transit bracket and

screws to protect the machine for future transit.

The Manufacturers will not be responsible for any

damage to the machine caused by not following the

instructions relating to releasing the transit protection.

The user is responsible for all installation costs.

Connecting the fill hose

This machine has an inlet hose with 19 mm (3/4”) threaded ferrules fitted to the

ends to attach between the threaded connector on the appliance and the water

supply.

Only use the new hose supplied to connect the machine and ensure that the

sealing washers are in place inside the hose connectors.

Do not re-use old hoses which are attached to existing installations.

Do not over-tighten the connections. Hand tight is sufficient.

Do not trap or kink the hoses.

Connect the straight end of the hose to the

stop taps.

40000400 English.qxd 26/08/2003 13:15 Page 8

If the inlet hose’s connection point is changed, check that the 3/4” threaded ferrule

on the inlet hose is firmly attached to the electrovalve connector.

Water supply requirements

Connect the machine to the drainage system used by household sinks.

THIS MACHINE MUST BE CONNECTED IN

ACCORDANCE WITH THE WATER SUPPLY

REGULATIONS. WATER BYELAWS PROHIBIT

CONNECTION TO A SURFACE WATER DRAIN.

No other appliance should be plumbed into the standpipe.

There are two possible arrangements which can be seen below :-

DRAIN HOSE

HOSE SUPPORT

CROOK

12-15cm

32mm

min

60-80cm

HOSE SUPPORT CROOK

ATTACH HOSE

SECURELY TO

WASTE OUTLET

DRAIN HOSE

FIX SECURELY

ABOVE OVERFLOW

OUTLET OF SINK

For the washing machine to function properly the outlet end of the drain

hose must be at a minimum of 60 cm and a maximum of 80 cm from the

ground.

40000400 English.qxd 26/08/2003 13:15 Page 9

Testing the installation

Refer to the programme guide for details of how to select programmes.

1. Turn on the water supply and check for leaks from fill hoses.

2. Switch on the electricity supply.

3. Select a spin programme and then press the START/PAUSE button to start

the machine.

Allow the programme to continue for one minute and then cancel the

programme (please refer to “Description of Controls” section for cancelling the

programme). This will remove any water remaining in the machine from factory

testing.

4. To check for cold water filling to the machine:

Select a rinse programme and press the START/PAUSE button to start the

machine.

Allow the tumble action to continue until the water has pumped out.

Check that the drain outlet is not leaking or overflowing.

5. Switch off the machine at the end of the cycle by turning the programme knob

to the “OFF” position.

6. To check for hot water filling to the machine:

Select programme 1 and press the START/PAUSE button to start the

machine.

Allow the wash action to continue for one minute, then cancel the programme.

Alternatively, both inlets can be connected to the cold water supply by using a

suitable adaptor.

7. Select a spin programme and press the START/PAUSE button to switch the

machine on. If the machine takes longer than one minute to empty check the

drain hoses for kinks.

Installation testing is now complete.

40000400 English.qxd 26/08/2003 13:15 Page 10

Inhaltsverzeichnis

Sprachen:

Andere Hoover Waschmaschine Handbücher

Hoover

Hoover AM 1243 S Bedienungsanleitung

Hoover

Hoover DYSM 7122D3 Bedienungsanleitung

Hoover

Hoover HTC 9 AA Fehlerbehebungshandbuch

Hoover

Hoover UMS02 Bedienungsanleitung

Hoover

Hoover HWE 410AMBS/1-S Bedienungsanleitung

Hoover

Hoover VT D2 Bedienungsanleitung

Hoover

Hoover A 089 Bedienungsanleitung

Hoover

Hoover HWB 2DN Bedienungsanleitung

Hoover

Hoover HNF 9167 Bedienungsanleitung

Hoover

Hoover HV-LFL8 Fehlerbehebungshandbuch

Hoover

Hoover HV-LFL10 Bedienungsanleitung

Hoover

Hoover WDYNS 642 D Bedienungsanleitung

Hoover

Hoover NEXTRA HNS 9125 INTERACT 3D Bedienungsanleitung

Hoover

Hoover AB100 Betriebsanleitung

Hoover

Hoover HTV 913 Fehlerbehebungshandbuch

Hoover

Hoover HWB 814 DN Bedienungsanleitung

Hoover

Hoover HSE120 Bedienungsanleitung

Hoover

Hoover VisionHD Bedienungsanleitung

Hoover

Hoover Performa Family Bedienungsanleitung

Hoover

Hoover HOOVER AL 86 Bedienungsanleitung

Hoover

Hoover SELECT 1500 Bedienungsanleitung

Hoover

Hoover HNL 642 Bedienungsanleitung

Hoover

Hoover HC6 145M Bedienungsanleitung

Hoover

Hoover OTSEIN VHD 9123 D Bedienungsanleitung

Beliebte Waschmaschine Handbücher anderer Marken

Tricity Bendix

Tricity Bendix AW 1000 W Produkthandbuch

Panasonic

Panasonic NA-F60L5WRB Bedienungsanleitung

GE WSLP1500 Handbuch

Electrolux

Electrolux EWF1284EDW Bedienungsanleitung

Bosch

Bosch WAN2829BSN Bedienungsanleitung

LG TV2516DV3B Bedienungsanleitung

LG TH2517DSAV Bedienungsanleitung

VESTEL

VESTEL CMH-XL 7510 TE Bedienungsanleitung

AEG

AEG 74335 Bedienungsanleitung

Johnson

Johnson JWF721A Bedienungsanleitung

Beko

Beko WTE7604XLW0 Bedienungsanleitung

Danby

Danby DTT100A1WDB Montageanleitung

Amica

Amica WA 14 Ex Bedienungsanleitung

Daewoo

Daewoo DWD-F1222 Bedienungsanleitung

Bosch

Bosch WAS28461AU Bedienungsanleitung

Miele

Miele PW 6080 Vario Bedienungsanleitung

Finlux

Finlux FLX108CF220 Bedienungsanleitung

Whirlpool

Whirlpool 3LBR5132AN0 Bedienungsanleitung