Horizon Hobby Axial AX24 XC-1 Bedienungsanleitung

INSTRUCTION MANUAL

BEDIENUNGSANLEITUNG

MANUEL D’UTILISATION

MANUALE DI ISTRUZIONI

AXI00003T1/T2

Before operating this vehicle, please read all printed

materials thoroughly. Horizon Hobby is not responsible

for inadvertent errors in this manual.

Scan the QR code and select the Manuals and Support quick links

from the product page for the most up-to-date manual information.

Scannen Sie den QR-Code und wählen Sie auf der Produktseite die Quicklinks

Handbücher und Unterstützung, um die aktuellsten Informationen zu Handbücher.

Scannez le code QR et sélectionnez les liens rapides Manuals and Support sur la

page du produit pour obtenir les informations les plus récentes sur le manuel.

Scannerizzare il codice QR e selezionare i Link veloci Manuali e Supporto dalla

pagina del prodotto per le informazioni manuali più aggiornate.

AX24 XC-1

Age Recommendation: Not for children under 14 years. This is not a toy.

WARNING: Read the ENTIRE instruction manual to become familiar with the features of the product before

operating. Failure to operate the product correctly can result in damage to the product, personal property and

cause serious injury.

This is a sophisticated hobby product. It must be operated with caution and common sense and requires some basic

mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the

product or other property. This product is not intended for use by children without direct adult supervision. Do not use with

incompatible components or alter this product in any way outside of the instructions provided by Horizon Hobby, LLC. This

manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and

warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or serious injury.

NOTICE

All instructions, warranties and other collateral documents are subject to change at the sole discretion of Horizon

Hobby, LLC. For up-to-date product literature, visit horizonhobby.com or towerhobbies.com and click on the support or

resources tab for this product.

MEANING OF SPECIAL LANGUAGE

The following terms are used throughout the product literature to indicate various levels of potential harm when

operating this product:

WARNING: Procedures, which if not properly followed, create the probability of property damage, collateral

damage, and serious injury OR create a high probability of superﬁcial injury.

CAUTION: Procedures, which if not properly followed, create the probability of physical property damage AND a

possibility of serious injury.

NOTICE: Procedures, which if not properly followed, create a possibility of physical property damage AND a little or

no possibility of injury.

As the user of this product, you are solely responsible for operating in a manner that does not endanger yourself and

others or result in damage to the product or property of others.

This model is controlled by a radio signal subject to interference from many sources outside your control. This interference

can cause momentary loss of control, so it is advisable to always keep a safe distance in all directions around your model

as this margin will help avoid collisions or injury.

• Never operate your model with low transmitter batteries.

• Always operate your model in open spaces away from full-size vehicles, trafﬁc and people.

• Never operate the model in the street or in populated areas for any reason.

• Carefully follow the directions and warnings for this and any optional support equipment

(chargers, rechargeable battery packs, etc.) you use.

• Keep all chemicals, small parts and anything electrical out of the reach of children.

• Never lick or place any portion of the model in your mouth as it could cause serious injury or even death.

• Exercise caution when using tools and sharp instruments.

• Take care during maintenance as some parts may have sharp edges.

• Immediately after using your model, do NOT touch equipment such as the motor, electronic speed control and battery,

because they generate high temperatures. You may burn yourself seriously touching them.

• Do not put ﬁngers or any objects inside rotating and moving parts, as this may cause damage or serious injury.

• Always turn on your transmitter before you turn on the receiver in the car. Always turn off the receiver before turning

your transmitter off.

• Keep the wheels of the model off the ground when checking the operation of the radio equipment.

SAFETY PRECAUTIONS AND WARNINGS

TABLE OF CONTENTS

USB Charging Warnings ..................................................... 4

Charge the Vehicle Battery ................................................. 4

Transmitter Functions.......................................................... 5

Rear Steering Modes.......................................................... 5

Servo Travel......................................................................... 6

Install the Transmitter Batteries......................................... 6

Remove the Vehicle Body ................................................... 6

Install the Vehicle Battery................................................... 7

Power on the Transmitter.................................................... 7

Power on the Vehicle .......................................................... 8

Test the Controls................................................................. 8

After Driving........................................................................ 9

Binding the Transmitter and Receiver................................. 9

Receiver and ESC wiring Diagram...................................... 9

Troubleshooting................................................................. 10

Parts List............................................................................ 10

Limited Warranty .............................................................. 10

Warranty and Service Contact Information...................... 12

FCC Information................................................................. 12

IC Information.................................................................... 12

Compliance Information for the European Union ............. 13

Exploded Views ................................................................ 50

BOX CONTENTS

SPECIFICATIONS

Length 8.6” (220mm)

Width 3.9” (100mm)

Height 3.6” (93mm)

Operating Weight 8 oz (226.8g)

INCLUDED COMPONENTS

Vehicle AX24 XC-1 1/24th Scale RTR (AXI00003)

Transmitter SLT3 2.4 GHz 3 channel (SPMRSLT310)

Charger USB LiPo Charger (DYNC1063)

Vehicle Battery 7.4V, 350mAh, 2S LiPo (DYNB0012)

Motor SCX24 030-Motor with Pinion (DYNS1217)

ESC/Receiver 2-in-1 ESC/Rx with Forward and Reverse

(SPMXSE2425RX)

Servos (2) AS-1 Micro Servo (AXI31619)

Transmitter Batteries (4) AA Alkaline

USB CHARGING WARNINGS

CHARGE THE VEHICLE BATTERY

WARNING: Failure to exercise caution while using this product and comply with the following warnings could

result in product malfunction, electrical issues, excessive heat, FIRE, and ultimately injury and property damage.

• NEVER LEAVE CHARGING BATTERIES UNATTENDED.

• NEVER CHARGE BATTERIES OVERNIGHT.

• Never attempt to charge dead, damaged or wet battery packs.

• Never attempt to charge a battery pack containing different types of batteries.

• Never allow children under 14 years of age to charge battery packs.

• Never charge batteries in extremely hot or cold places or place in direct sunlight.

• Never charge a battery if the cable has been pinched or shorted.

• Never connect the charger if the power cable has been pinched or shorted.

• Never attempt to dismantle the charger or use a damaged charger.

• Always use only rechargeable batteries designed for use with this type of charger.

• Always inspect the battery before charging.

• Always keep the battery away from any material that could be affected by heat.

• Always monitor the charging area and have a ﬁre extinguisher available at all times.

• Always end the charging process if the battery becomes hot to the touch or starts to change form (swell) during the

charge process.

• Always connect the positive leads (+) and negative leads (–) correctly.

• Always disconnect the battery after charging, and let the charger cool between charges.

• Always charge in a well-ventilated area.

• Always terminate all processes and contact Horizon Hobby if the product malfunctions.

• Charge only rechargeable batteries. Charging non-rechargeable batteries may cause the batteries to burst, resulting

in injury to persons and/or damage to property.

• The USB outlet shall be installed near the equipment and shall be easily accessible.

CAUTION: Always ensure the battery you are charging meets the speciﬁcations of this charger. Not doing so

can result in excessive heat and other related product malfunctions, which can lead to user injury or property

damage. Please contact Horizon Hobby or an authorized retailer with compatibility questions.

CAUTION: If at any time during the charge process the battery pack becomes hot or begins to puff, disconnect the

battery immediately and discontinue the charge process as batteries can cause ﬁre, collateral damage and injuries.

Use only the included USB charger to charge the battery.

1. Connect the charger to a suitable USB power port. The charger will work with most 5V

mobile power sources or smartphone chargers with at least 1 amp of power output.

NOTICE: Charging the battery with a USB power port with less than 1 amp of power

output can produce heat.

2. Connect the charge lead to the battery, noting correct polarity. Charging a fully

discharged battery takes approximately 45–60 minutes. Charge times may vary

depending on the power source.

3. Remove the battery from the charger when the charging cycle is complete.

4. Remove the charger from the power supply.

CAUTION: Once charging is complete, immediately remove the battery. Never

leave a battery connected to the charger.

CHARGER LED INDICATIONS

RED, solid = Charging

RED, solid; GREEN, ﬂashing = Stand by

GREEN, solid = Charging complete

REAR STEERING MODES

TRANSMITTER FUNCTIONS

The AX24 XC-1 features both front and rear steering. There are

three steering modes to manage how the rear steering responds

to the steering wheel. The steering mode is selected from the

transmitter with the three position switch.

IMPORTANT: Steering trim only affects the front wheels.

• In all modes the front wheels operate normally.

• Up is crab mode where the rear wheels steer the same

direction as the front so the entire vehicle can crab sideways.

• Down is mirror mode where the rear wheels steer opposite

the front wheels to tighten the turning radius.

• Center is front steer only mode, where the rear wheels do

not steer.

• Press up or down on the three position switch to change from

front steer only.

• When changing from one of the dual steering modes, you

must ﬁrst toggle back to front steer only.

A. Throttle Trim

Adjusts the throttle neutral point.

B. Steering Trim

Adjusts the front steering center point. Normally, the steering

trim is adjusted until the vehicle tracks straight.

C. LED

• Solid red lights: Indicates the power is ON and adequate

battery power.

• Flashing red lights: Indicates the battery voltage is critically

low. Replace batteries.

D. Steering Wheel

E. Throttle/Brake

F. Steering Rate

On-The-Fly knob for travel adjustment on the steering.

G. Steering Mode

3 position switch.

H. Throttle Limit

Limits throttle output to 50/75/100%

Select 50% or 75% for less experienced drivers or when you

are driving the vehicle in a small area.

I. Throttle (TH) Servo Reversing

Move the switch to reverse the throttle channel.

J. Steering (ST) Servo Reversing

Move the switch to reverse the steering channel.

K. Power Button

A.A.

Speciﬁcations

Power Supply: 4 AA Batteries

Operating Frequency: 2.4GHz

Transmit Power: <100mw

Control Protocol: SLT

Control: Proportional Steering and Throttle/Brake with Trim

Knobs, Third Channel with Three Position Switch.

Auxiliary Functions: Three Position Throttle Limit Switch,

Steering Rate Knob to Change Steering Travel on-the-ﬂy,

Programmable Servo Travel for Steering and Throttle/Brake.

INSTALL THE TRANSMITTER BATTERIES

SERVO TRAVEL

CAUTION: NEVER remove the transmitter batteries while the vehicle is powered ON. Loss of vehicle

control, damage, or injury may occur.

CAUTION: If using rechargeable batteries, charge only rechargeable batteries. Charging non-rechargeable

batteries may cause the batteries to burst, resulting in injury or property damage.

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according

to state and local laws.

1. Press the battery compartment latch and

rotate the batter cover to open.

2. Install 4 AA alkaline batteries (or Ni-Cd or

Ni-MH), verifying correct polarity.

3. Close the battery cover until it latches.

1. Begin with the transmitter binding process to the

receiver complete. Power ON the receiver.

2. Hold full right and full brake while powering the

transmitter ON to put the transmitter into program-

ming mode.

The LED on the transmitter will ﬂash 4 times to

indicate it is in programming mode.

3. Turn and hold the wheel full left to set the travel

limit for that direction, Press the A button to in-

crease travel, press the B button to reduce travel.

The LED will ﬂash once with every change. Return

the wheel to center to set the travel value.

IMPORTANT: If the value has reached the maximum or

minimum that can be accepted, the LED will not ﬂash with

further input.

4. Turn the wheel to the right and repeat the process to

set the steering travel to the right.

5. For electric vehicles, power the Transmitter OFF to

save the settings. Calibrate your ESC to the default

throttle travel.

6. For fuel powered vehicles, set the throttle travel

without the engine running; After setting steering

travel, you can set throttle travel with the same

process. Pull and hold full throttle, adjust travel

with the A and B buttons, return to center to set the

value.

7. Push full brake, adjust travel with the A and B but-

tons, return to center.

8. Power the transmitter OFF to save the values.

The servo travel on the Steering and Throttle channels can be

adjusted through a special programming mode in the transmitter.

REMOVE THE VEHICLE BODY

INSTALL THE VEHICLE BATTERY

POWER ON THE TRANSMITTER

POWER ON THE VEHICLE

With the vehicle wheels off the ground, test the throttle

and steering controls. Ensure the wheels spin in the proper

direction and the front wheels turn in the proper direction

with steering input.

After checking for proper direction of controls, start driving

slowly. If the vehicle does not go straight without steering

input, adjust the steering trim dial on the transmitter until

the vehicle holds a straight line with no steering input.

Have FUN driving your vehicle!

TEST THE CONTROLS

AFTER DRIVING

When you are ﬁnished driving your vehicle:

1. Power off the vehicle. 2. Power off the transmitter. 3. Remove the vehicle battery

and charge if necessary.

BINDING THE TRANSMITTER AND RECEIVER

RECEIVER AND ESC WIRING DIAGRAM

Binding is the process of programming the receiver to recognize a speciﬁc transmitter signal, thus preventing interference

from other transmitters. The transmitter and receiver included with your vehicle are bound at the factory. If you need to

rebind, follow the instructions below.

NOTICE: Do not attempt to bind the transmitter and reciever if any other compatible transmitters are in bind mode

within approximately 400 feet (120 meters). Doing so may result in unexpected binding to the wrong transmitter and

loss of control of your vehicle.

Prior to starting the binding procedure, ensure the servos and motor are connected to the proper ports on the receiver

and the transmitter has fresh batteries installed.

1. Insert the bind plug into the receiver.

2. Power on the receiver. The receiver LED will ﬂash rapidly.

3. Power on the transmitter while pressing the BIND button. The transmitter LED will ﬂash.

4. When the LED glows solid, binding is complete.

The receiver LED will glow solid when both the transmitter and receiver are powered on. If the receiver LED ﬂashes

rapidly or is not illuminated, the transmitter and receiver are not bound. Power off both the transmitter and receiver and

repeat the binding procedure.

Antenna

LED

Motor Port Battery Port Power Switch

Mode (Jumper)

Bind Port

Front Steering

Rear Steering

Throttle

(For optional external ESC,

not used with stock motor)

Forward/Reverse, no

Brake. Recommended

for crawlers.

Forward/Brake/Reverse Not

recommended for crawlers.

PARTS LIST

TROUBLESHOOTING

PROBLEM POSSIBLE CAUSE SOLUTION

Vehicle does not move

Batteries are not installed properly in the

transmitter

Ensure the transmitter batteries are properly

installed

Weak or no battery in the vehicle Install a freshly charged vehicle battery

Damaged motor Replace the motor

Frayed or broken wiring Replace any damaged wiring

ESC is shut down by heat protection circuit Allow the ESC to cool down completely

Loss of vehicle control

Improper antenna placement Ensure the transmitter antenna is not blocked

and the receiver antenna is located properly

Weak or no batteries in the transmitter

or vehicle

Install a freshly charged vehicle battery and

new transmitter batteries

Neutral or trim position is incorrect Adjust the steering trim

Receiver and/or battery not connected properly Check all receiver and battery connections

Steering and/or throttle

function is reversed

Servo travel is reversed at the transmitter Set the transmitter servo reversing switch to

the correct position

Motor wires are not connected properly Check all motor wires for correct polarity and

secure connection

AXI200012 XC-1 Body, Clear: AX24

AXI201004 Chassis Set: AX24

AXI201005 Body Post Set: AX24

AXI201006 Rock Sliders: AX24

AXI202001 Driveshaft Set: AX24

AXI203001 Shock Set,Assembled (4pcs): AX2

AXI204004 Link Set: AX24

AXI206000 3mm Body Clip w/Tab Black (10pc)

AXI31608 SCX24 Transmission (Assembled)

AXI31609 SCX24 Front Axle (Assembled)

AXI31619 AS-1 Micro Servo

AXI40002 1.0 Rockster Whls Blck (4) SCX24

AXI40007 1.0 Rock Lizards 2.44""(62mm)(4)

AXIC1147 AX31147 Nylon Lock Nut 2mm(10)

DYNB0012 Battery 7.4v 350mAh 2s LiPo

DYNC1062 USB Charger LiPo

DYNS1217 SCX24 Motor w/ Pinion

SPMRSLT310 SLT3 Transmitter

SPMXSE2425RX 2-in-1 ESC and SLT Receiver

Optional Parts:

Check the AX24 product page at HorizonHobby.com for the

latest releases

AXI31567 1.0 Nitto Trail Grappler M/T V1 4p

AXI31610 SCX24 Rear Axle (Assembled)

AXI31615 1.0 KMC Machete Wheels 4pcs

AXI40000 1.0 Method MR307 whls(4) SCX24

AXI40001 1.0 BFG KrawlerT/A Tire(4):SCX2

AXI40004 1.0 Nitto Trl Grapp V2 Tire(4)SCX2

DYNH2027 SS Screw Set: Axial SCX24

SPMXC1050 Smart S1500 DC Charger, 1x500W

SPMXC2050 Smart S155 G2 AC 1x55W Charger

SPMXCA309 Adapter: IC3 Battery/JST PH2.0 Dev.

LIMITED WARRANTY

What this Warranty Covers

Horizon Hobby, LLC, (Horizon) warrants to the original

purchaser that the product purchased (the “Product”) will

be free from defects in materials and workmanship for a

period of 2 years from the date of purchase.

What is Not Covered

This warranty is not transferable and does not cover (i)

cosmetic damage, (ii) damage due to acts of God, accident,

misuse, abuse, negligence, commercial use, or due to

improper use, installation, operation or maintenance, (iii)

modiﬁcation of or to any part of the Product, (iv) attempted

service by anyone other than a Horizon Hobby authorized

service center, (v) Product not purchased from an authorized

Horizon dealer, or (vi) Product not compliant with applicable

technical regulations or (vii) use that violates any applicable

laws, rules, or regulations.

OTHER THAN THE EXPRESS WARRANTY ABOVE,

HORIZON MAKES NO OTHER WARRANTY OR

REPRESENTATION, AND HEREBY DISCLAIMS ANY AND

ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT

LIMITATION, THE IMPLIED WARRANTIES OF NON-

INFRINGEMENT, MERCHANTABILITY AND FITNESS

Inhaltsverzeichnis

Andere Horizon Hobby Motorisiertes Spielzeugauto Handbücher

Horizon Hobby

Horizon Hobby Vaterra Kalahari Bedienungsanleitung

Horizon Hobby

Horizon Hobby ProBoat RECOIL2 Bedienungsanleitung

Horizon Hobby

Horizon Hobby LOSI FORD RAPTOR BAJA REY Bedienungsanleitung

Horizon Hobby

Horizon Hobby 5IVE-T Bedienungsanleitung

Horizon Hobby

Horizon Hobby Arrma TYPHON Bedienungsanleitung

Horizon Hobby

Horizon Hobby ARRMA LIMITLESS Bedienungsanleitung

Horizon Hobby

Horizon Hobby ARMA KRATON 8S Bedienungsanleitung

Horizon Hobby

Horizon Hobby Axial SCX-10 III JEEP JLU WRANGLER Bedienungsanleitung

Horizon Hobby

Horizon Hobby LOSi POLARIS RZR REY 4WD DESERT SXS RTR Bedienungsanleitung

Horizon Hobby

Horizon Hobby Losi LASERNUT TENACITY ULTRA 4 ROCK RACER Bedienungsanleitung

Horizon Hobby

Horizon Hobby Axial SCX10 PRO Bedienungsanleitung

Horizon Hobby

Horizon Hobby axial 1940'S DODGE POWER WAGON Bedienungsanleitung

Horizon Hobby

Horizon Hobby Blade 450 X Bedienungsanleitung

Horizon Hobby

Horizon Hobby Losi DESERT BUGGY XL-E Bedienungsanleitung

Horizon Hobby

Horizon Hobby DESERT BUGGY XL-E Bedienungsanleitung

Horizon Hobby

Horizon Hobby LOS05013 Bedienungsanleitung

Horizon Hobby

Horizon Hobby Axial SMT10 Bedienungsanleitung

Horizon Hobby

Horizon Hobby Eight-E 3.0 Bedienungsanleitung

Horizon Hobby

Horizon Hobby LOSI RockRey Bedienungsanleitung

Horizon Hobby

Horizon Hobby Losi 22S Bedienungsanleitung

Horizon Hobby

Horizon Hobby ARMA TALION EXB 6S Bedienungsanleitung

Horizon Hobby

Horizon Hobby ARRMARC KRATON Bedienungsanleitung

Horizon Hobby

Horizon Hobby Axial CAPRA AXI03000 Bedienungsanleitung

Horizon Hobby

Horizon Hobby Axial RYFT RBX10 Bedienungsanleitung

Beliebte Motorisiertes Spielzeugauto Handbücher anderer Marken

Eduard

Eduard Humber Scout Car Mk.I exterior Bedienungsanleitung

Traxxas

Traxxas 4995X Bedienungsanleitung

Jamara

Jamara VW T1 Bus Bedienungsanleitung

REVELL

REVELL 68 CHEVY CHEVELLE SS 396 Bedienungsanleitung

Schumacher

Schumacher Pro Cat Bedienungsanleitung

Tamiya

Tamiya TT-01 TYPE E Bedienungsanleitung

Eduard

Eduard Krupp Protze 6x4 1/48 Bedienungsanleitung

New Bright

New Bright 61072UEP Bedienungsanleitung

Team Durango

Team Durango DEX410v5 Bedienungsanleitung

Jamara

Jamara Mercedes Actros Muldenkipper 2,4 GHz Bedienungsanleitung

PLAYMOBIL

PLAYMOBIL 9536 Bedienungsanleitung

Atomic

Atomic BZ3 Bedienungsanleitung

Aiyaplay

Aiyaplay 370-290V00 Bedienungsanleitung

Power Wheels

Power Wheels GRJ53 Bedienungsanleitung

ZEROTRIBE

ZEROTRIBE Zetricks ZT1144 Bedienungsanleitung

INJUSA

INJUSA 412 Bedienungsanleitung

Maverick

Maverick MSC-30BR-WP Bedienungsanleitung

Land of B.

Land of B. Rollin' Riders Bedienungsanleitung

Horizon Hobby axial AX24 XC-1 Bedienungsanleitung

Beliebte Motorisiertes Spielzeugauto Handbücher anderer Marken