Hornady 98210 Bedienungsanleitung

Owner’s Manual

RAPiD®

VEHICLE SAFE

Item No. 98210

Instructional videos for Hornady Security®

products are available at hornady.com.

With patented RFID technology.

READ THIS FIRST

Warning: NEVER store a loaded ﬁrearm in the Hornady Security®RAPiD®

Vehicle Safe under any circumstances. The risks associated with storage of

a loaded ﬁrearm include, but are not limited to, unintentional discharge upon

insertion or removal of the ﬁrearm. Unintentional discharge may result in

bullet and safe fragments dispersing in multiple directions, which may cause

serious injury or death. Hornady Security®is not liable for any misuse of the

RAPiD®Safe.

Warning: No safe is entirely secure. The RAPiD®Safe is only as secure as

your maintenance of the keys, code and RFID tags. You are solely responsible

for maintaining your keys, code, and RFID tags. Keep your keys and RFID

tags in a secure location at all times. Store your RAPiD®Safe in a secure

location away from your keys and RFID tags. Hornady Security®is not liable

for unauthorized access, including damage to, or loss of property, or personal

injury. Again, NEVER store a loaded ﬁrearm in your Hornady®RAPiD®Safe, as

this may result in unauthorized access to the loaded ﬁrearm.

Warning: Except as expressly provided in the RAPiD®Safe Limited Warranty,

Hornady Security®is not liable for any expense or damage associated with

your inability to open the RAPiD®Safe. Electronic systems may fail. Verify that

the keys furnished operate the lock. Keep your keys in a secure location at all

times. For your security, Hornady Security®WILL NOT send replacement keys.

Warning: Hornady Security®is not liable for any loss, theft, or damage to

personal property. The RAPiD®Safe is not intended to protect the contents

from ﬁre, water, humidity, or other environmental conditions. Do not, under

any circumstances, return the RAPiD®Safe to Hornady Security®with any

personal property inside.

Important Information

• RFID Tag refers to the chip in any of the RFID “keys” included with the

RAPiD®Safe (wristband, key fob or decals). You may also purchase

additional RFID tags.

• For trouble-free operation of your RAPiD®Safe, please read and understand

all instructions before use.

• Questions? Call our tech line at 800-338-3220.

• Never store loaded ﬁrearms in the RAPiD®Safe. Follow local laws for

ﬁrearm storage.

Not Pictured:

• Owner’s Manual

• Warranty Card

Table of Contents Page

Warnings and Important Information............................................................. 1

Items Included............................................................................................................. 2

Setup and Operation................................................................................................ 3

Installation.................................................................................................................... 7

Warranty......................................................................................................................... 9

Product Registration and Service................................................................... 10

Frequently Asked Questions.............................................................................. 10

Items included with your RAPiD®Safe

1. RAPiD®Vehicle Safe

2. One (1) RFID Adjustable Wristband (No. 98166)

3. Two (2) RFID Adhesive Decals (No. 98168)

4. One (1) RFID Key Fob Tag (No. 98167)

5. Two (2) Circular Barrel Keys

6. Security Cable

7. 12V Car Adapter Power Supply

(not pictured)

RAPiD®Vehicle Safe

Item No. 98210

Exterior: 12.0" x 6.4" x 2.2"

Interior: 7.5" x 5.6" x 1.7"

Power: 12 V 1.0A or four (4) AAA

batteries (not included)

U.S. Patent No. 9530266

Batteries

For backup or mobile use, your safe

requires four AAA batteries (not

included).

To install batteries, press the release

tab on the side of the safe while lifting

off the battery cover. Install four AAA

batteries according to the diagram

inside the battery compartment.

Replace the battery cover by inserting

the end opposite the release tab

and then snapping it into place. Only

use new high-quality AAA batteries.

Replace all batteries at the same time.

AC Power

The RAPiD®Vehicle Safe is designed

to be powered by either the 12V Car

Adapter or four AAA batteries.

To connect the 12V Car Adapter, plug

one end of the cable into your car’s 12V

accessory socket. Then, carefully run

the cable behind the safe and through

the channel in the back of the safe and

plug the cable into the power jack.

RAPiD®Safe Setup and Operation

Congratulations on purchasing the technologically advanced RAPiD®Safe. You have

taken a signiﬁcant step in securing the safety of your handgun.

To achieve the best experience with your RAPiD®Safe, please read all instructions

carefully, and understand its operation.

After the RAPiD®Safe has been taken out of the box, make sure both circular barrel

keys ﬁt and unlock your RAPiD®Safe. Contact Hornady®at 800-338-3220 if the keys do

not work. Store keys in a secure location outside the safe.

Release Tab

Power Jack

Battery Power Mode

When the RAPiD®Safe is unplugged and is

operating on battery power, you must press

any button on the keypad on the top panel

to activate the RFID reader.

Pressing any button on the keypad causes

the system to go from battery-saving mode

to ready status.

For example: To open your safe with an

RFID tag while the system is running on

battery power, ﬁrst press any button on the

keypad to bring it to ready status. Place

your RFID tag within 1" of the center of the

RFID reader to open the safe.

Keypad Tones On/Off

Press and hold the “H” button on the keypad

for 5 seconds until the light turns off to toggle

sound on and off.

To check battery level:

1. Disconnect from the 12V Car Adapter.

2. Press any button on the keypad.

3. The LED light near the center of the

keypad will ﬂash.

a. Flashing Green – Good battery

b. Flashing Yellow – Low battery

c. Flashing Red – Weak battery

NOTE: Replace batteries every 12 months

or if they become low or weak.

"H" Button

Keypad

RFID Reader

Battery & Latch

Status Light

to program an RFID tag fail, please contact

Hornady at 800-338-3220.a

6. One to ﬁve RFID tags can be programmed

into the safe.

WARNING: After programming, conﬁrm all

RFID tags are either programmed or not. All

programmed RFID tags must be kept in a safe

place to prevent use from unauthorized users.

How to Program Your

RFID Tags

Your RAPiD®Safe includes three (3) styles

of RFID tags, including:

• 1 Adjustable Wristband

• 1 Key Fob

• 2 Decals

*Additional RFID tags can be purchased

separately.

The RAPiD®Safe can store up to 5 tags.

To program these tags:

1. Open the RAPiD Safe with either the

key, an RFID tag previously programmed

by the user or the key code. (The safe

does not ship with pre-programmed

RFID tags. An RFID tag must be

programmed by the user to work with

this safe.)

2. Locate the red program button. Press

and release the button to begin

programming an RFID tag. The ﬁrst

available program location will begin to

blink.

3. Hold the RFID tag no more than 1-inch

from the illuminated RFID reader in

the center of the top panel. If the

programming was successful, the safe

should beep two times and the available

slot should go from blinking to solid red

for approximately 10 seconds.

NOTE: If the user attempts to program

an RFID tag that is already stored

into the safe, the safe will beep three

times and the RFID tag will not be

programmed into the duplicate slot. The

RFID tag can only be programmed into

one location.

4. Verify the RFID tag is programmed by

holding the tag over the RFID reader

with the safe open. The motor should

cycle after each scan.

5. If the RFID tag does not program into the

safe, the program function will time out

after 10 seconds and the safe will return

to normal operation. If multiple attempts

NOTE: The RFID chip is located in the bulge of the

wristband near the clasp. It is designed to be worn on

the bottom of the wrist for maximum read distance.

RFID Chip

RFID Reader

How to Program Your

Key Code

A single user-deﬁned 4 to 6 digit code can

be programmed into the RAPiD®Safe.

1. Open the RAPiD Safe with either the key

or a previously programmed RFID tag or

key code. The safe ships with a default

code and should be reprogrammed

before ﬁrst use.

2. Locate the red program button to begin

programming your key code. The ﬁrst

available tag location will begin to blink

to indicate program mode.

3. With the safe open, enter a 4- to 6-digit

code into the keypad. Press the “H”

after entering your code. Verify your

code is correct by re-entering your

code and pressing “H.” The motor

should cycle.

Program Button

How to Remove All RFID Tags From Safe

1. Open the RAPiD®Safe with either

the key or a previously programmed

RFID tag or key code. Locate the red

program button. Press and hold the

button for ﬁve seconds to erase all

tags from the safe. All ﬁve red LEDs

will begin to blink in sequence. (The

safe does not allow individual tags to

be removed. They must all be erased at

one time. The intended RFID tags can

then be reprogrammed back into the

safe with the instructions above.)

NOTE: To abort the erase procedure,

press the “H” button on the keypad, or

do not touch anything, and the erase

procedure will automatically abort

after 10 seconds and return to normal

operation. Test RFID tags and the key

code to conﬁrm they are operational.

2. To conﬁrm erasing procedure, press

and release the program button again.

All ﬁve LED lights will blink three times

to visually conﬁrm all RFID tags have

been removed. All RFID tags will no

longer work until they are programmed

back into the safe with the instructions

in the “How to Program Your RFID

Tags” section.

Closing the Safe

The safe has a latch closure sensor that will illuminate the LED in the keypad when

the lid is closed.

Green – Latch has fully closed.

Blinking Red – Latch has NOT fully closed.

Press lid to close or re-open and check for interference.

4. Your key code can now be used to open

the safe.

NOTE: Only one key code can be

programmed into the safe. If you attempt

to program a second code, the previous

code will be overwritten. A total of

5 RFID tags and 1 key code can be

programmed into the safe.

The vehicle mounting system includes a large mounting plate that can be wedged between

the seat and center console or between two seats in the vehicle. The inﬂatable air bladder

allows the mounting plate to adjust to nearly any seat gap and provide a ﬁrm mounting

location for the Vehicle Safe without modifying the vehicle.

Installing the Vehicle Safe to the Mounting System

Determine if the Vehicle Safe will be placed on the driver or passenger side of the vehicle.

Then loop the security cable around a solid anchor system near the desired mounting

location. The seat frame is typically the most accessible anchor point.

The Vehicle Safe attaches to the mounting plate

using two clamping rings. The safe ships with

one ring already attached to the back of the safe.

To attach the security cable, remove the one bolt

and nut on the clamp ring near the mounting post

with a gap. Place eye of cable ferrule between

the safe and clamp ring and replace bolt and nut.

The mounting plate is designed to wedge between

the seat and center console. The inﬂatable

bladder is meant to take up the space between

the seat and mounting plate so the mounting

plate is held ﬁrmly against the center console.

Air Bladder

PASSENGER

SEAT

DRIVER

SEAT

console

Install the safe onto the mounting plate by

aligning the two clamp rings with the pins on the

mounting plate and tighten the four screws.

NOTE: The safe can be tilted forward or

back by adjusting the clamp rings BEFORE

installing the screws.

Once the safe is mounted, slide the mounting

plate between the seat and center console.

Make sure the door of the safe can open

without interfering with the seat.

Inﬂate the air bladder by turning the

control valve clockwise and then

squeezing the inﬂater bulb

until the mounting

system is ﬁrmly

in place.

• Verify the air bladder is positioned onto the

mounting plate so it will inﬂate against the seat.

It may need to be rotated around the mounting

plate depending on if the safe will go on the

driver or passenger side of the vehicle.

• To rotate the air bladder, release all air in

the bladder by turning the control valve

counterclockwise.

• Slide the fabric cover back to expose the air

bladder on the mounting plate. Rotate the air

bladder around the mounting plate until the

inﬂatable air bladder is on the correct side.

• Slide fabric cover back over the air bladder.

• Begin by verifying the inﬂatable bladder is on

the seat side of the mounting plate by closing

the valve on the hand pump and gently inﬂating

the air bladder.

WARNING:

a. Do not overinﬂate

the air bladder.

b. The air bladder should

be inﬂated just enough

to hold the mounting

system in place.

c. Make sure the mounting system does not move even during hard braking by testing in a

controlled environment.

Verify system works as expected before storing a ﬁrearm or other valuables inside the safe.

RAPiD®Safe Limited Warranty

Hornady Security®warrants the RAPiD®Safe will, in normal use and service,

be free from defects in workmanship or materials for one (1) year from date

of purchase.

This Limited Warranty does not cover any of the following:

(a) Damage, deterioration, or malfunction resulting from accident,

negligence, misuse, improper installation, or lack of maintenance;

(b) Any defects not discovered and reported to Hornady Security®during

the one (1) year warranty period;

This Limited Warranty is not transferable and is enforceable by the original

owner only. In the event that Hornady Security®receives notice from the original

purchase of a warranty claim in conformity herewith, Hornady Security®will

promptly undertake an investigation of such claim. If the warranty claim is

covered by the Limited Warranty, Hornady Security,

will, in its sole discretion,

repair the defect(s) or replace RAPiD®Safe at the expense of Hornady Security.

Disclaimer of Implied Warranties. EXCEPT AS IS OTHERWISE EXPRESSLY

SET FORTH IN THE ABOVE LIMITED WARRANTY, HORNADY SECURITY®

MAKES NO OTHER REPRESENTATIONS OR WARRANTIES OF ANY KIND,

WHETHER EXPRESSED OR IMPLIED, BY OPERATION OF LAW OR OTHERWISE

WITH RESPECT TO THE RAPiD®SAFE OR ANY COMPONENT PART THEREOF,

INCLUDING WITHOUT LIMITATION ANY REPRESENTATION OR WARRANTY

WITH RESPECT TO MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR

PURPOSE OR USE.

Limitation on Liability. THE OBLIGATION OF HORNADY SECURITY®TO REPAIR

OR REPLACE AS PROVIDED ABOVE SHALL BE THE SOLE AND ONLY REMEDY

RESPECTING ANY DEFECT IN THE RAPiD®SAFE, OR ANY COMPONENT

PART THEREOF. IN THE EVENT THAT THE FOREGOING REMEDY FAILS OF ITS

ESSENTIAL PURPOSE, THE LIABILITY OF HORNADY SECURITY®TO PURCHASER

SHALL NOT, IN ANY EVENT, EXCEED THE ACTUAL PURCHASE PRICE OF THE

NON-CONFORMING GOODS; AND

Limitation on the Nature of Damages. HORNADY SECURITY®SHALL NOT,

UNDER ANY CIRCUMSTANCES, BE LIABLE TO THE PURCHASER OR ANY

THIRD PARTY FOR ANY SPECIAL, INDIRECT, INCIDENTAL, CONSEQUENTIAL,

LIQUIDATED OR PUNITIVE DAMAGES OF ANY NAME, NATURE OR

DESCRIPTION. HORNADY SECURITY®IS NOT RESPONSIBLE FOR DAMAGE TO

OR THEFT OF THE RAPiD®SAFE, OR ITS CONTENTS.

Andere Hornady Sicher Handbücher

Hornady

Hornady SnapSafe 75530 Bedienungsanleitung

Hornady

Hornady SnapSafe 75401 Bedienungsanleitung

Hornady

Hornady SnapSafe GlideVault 75404 Bedienungsanleitung

Hornady

Hornady SnapSafe 75410 Bedienungsanleitung

Hornady

Hornady SnapSafe 75413 Bedienungsanleitung

Hornady

Hornady SnapSafe 75413 Bedienungsanleitung

Hornady

Hornady RAPID 2600KP Bedienungsanleitung

Hornady

Hornady SnapSafe Trunk Safe II Bedienungsanleitung

Hornady

Hornady 95430 Bedienungsanleitung

Hornady

Hornady SnapSafe Super Titan XL Bedienungsanleitung

Hornady

Hornady SnapSafe 75430 Bedienungsanleitung

Hornady

Hornady SnapSafe 75402 Bedienungsanleitung

Hornady

Hornady RAPiD SAFE READY VAULT Bedienungsanleitung

Beliebte Sicher Handbücher anderer Marken

Squire

Squire Stronghold Keysafe Bedienungsanleitung

Phoenix

Phoenix FS0352C Produktinformationsblatt

Phoenix

Phoenix KS0030E Series Bedienungsanleitung

Vaultek

Vaultek 10 Series Technisches Datenblatt

Arregui

Arregui CLASS Bedienungsanleitung

Beaumont

Beaumont SMART KEYBOX Bedienungsanleitung

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Bedienungsanleitung

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO Bedienungsanleitung

Honeywell

Honeywell 5912 Bedienungsanleitung

Phoenix

Phoenix FS1280F Bedienungsanleitung

Phoenix

Phoenix SS0992K Produktinformationsblatt

Technomax

Technomax Trony Series Handbuch

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series Bedienungsanleitung

RICHTER CZECH

RICHTER CZECH LA Bedienungsanleitung

Olymp

Olymp GOsafe 110 Bedienungsanleitung

Phoenix

Phoenix SS0100E Produktinformationsblatt

Clarke

Clarke Strong-Arm CS1000K Bedienungsanleitung

Ankaro

Ankaro ANK EZ I Bedienungsanleitung