Hotpoint MAC140 Bedienungsanleitung

Portable Air Conditioner

14000BTU Operating

Instructions

OWNER’S MANUAL

Model #: MAC140

Please read owner’s manual carefully before operating unit.

TABLE OF CONTENTS

INTRODUCTION……………………………………………………………………………………………… 3

IMPORTANT SAFEGUARDS………………………………………………………………………………… 4

PRODUCT DIAGRAM………………………………………………………………………………………… 5

INSTALLATION……………………………………………………………………………………………… 6

CONTROL PANEL AND MULTI-COLOR DISPLAY…………………………………………………………… 8

CONTROL PANEL FUNCTIONS……………………………………………………………………………… 9

OPERATION USING THE CONTROL PANEL………………………………………………………………… 10

COOLING………………………………………………………………………………………………… 10

DEHUMIDIFYING………………………………………………………………………………………… 10

FANNING………………………………………………………………………………………………… 10

AUTO MODE……………………………………………………………………………………………… 11

SLEEP MODE…………………………………………………………………………………………… 11

REMOTE CONTROL & OPERATION…………………………………………………………………………… 12

MAINTENANCE……………………………………………………………………………………………… 14

END OF SEASON STORAGE……………………………………………………………………………… 14

TROUBLESHOOTING………………………………………………………………………………………… 15

ERROR MESSAGES………………………………………………………………………………………… 15

DISCLAIMER………………………………………………………………………………………………… 16

INTRODUCTION

Thank you for purchasing the Hotpoint MAC140 Portable Air Conditioner. This unit is designed to improve

indoor living and working comfort by providing cooling, dehumidifying, and ventilation with minimal

installation.

This multi-functional unit operates as an air conditioner, dehumidifier, and fan. Unlike traditional portables,

there is no bucket to empty. The condensate water is evaporated and removed through the exhaust duct along

with the warm exhaust air. When operating as an air conditioner, this unit is designed for spot cooling or

cooling a room no larger than 550 square feet with a standard eight foot ceiling height. When using this

appliance, always exercise basic safety precautions.

Other air conditioning methods are recommended when the indoor temperature is either below 64°F or above

86°F.

Please complete the following information for future reference. Retain this owner’s manual with your sales

receipt as a permanent record of your purchase.

Serial Number: _________________________________________________________

Date of Purchase: _______________________________________________________

Place of Purchase: _______________________________________________________

IMPORTANT SAFEGUARDS

Before installing and using your portable air conditioner, it is important that you read this owner’s manual

carefully. Store this manual in a safe place for future reference.

This instruction manual is used for guidance and does not form part of a contract. It reserves the right to

make technical changes without prior notice.

1. Always place the unit on a level surface.

2. The appliance shall be installed in accordance with national wiring regulation.

3. The unit must be connected to a correctly grounded power supply. For your safety, this unit is

grounded through the power cord plug when connected to a grounded wall outlet. Do not use an

adapter plug or extension cord.

4. Do not install the unit in an area where gas leakage may occur and/or in an explosive atmosphere.

5. Do not apply an insecticide or any type of flammable spray on the unit.

6. Confirm drainage piping is connected properly.

7. Do not start or stop the unit by inserting or pulling out the power plug.

8. Do not operate with wet hands.

9. Close supervision is necessary when the unit is used near children. The unit in not intended for use

by children.

10. Do not insert anything into the air outlet. Do not obstruct air inlet or outlet grills.

11. Do not expose skin or eyes directly to cool air for a long period of time.

12. If an abnormal odor or smoke comes out of the unit, disconnect the unit immediately and contact a

qualified service technician. (see page 13)

13. When opening the filter cover, do not touch the metal parts in the unit’s interior.

14. Do not immerse the unit in water or any type of liquid. Do not use the unit in the immediate

surroundings of a bath, shower, or swimming pool, or in any other steamy, wet areas.

15. When cleaning the unit, always turn the unit off and unplug the power cord.

16. Always inspect the power cord for signs of damage before use. If the power cord is damaged, it must

be replaced by the manufacturer or a qualified service technician.

17. Do not place a plant or allow a pet in the direct path of the airflow to avoid injury.

18. Do not put a stove, etc, where it would be exposed to the direct airflow. It may affect combustion.

19. Do not sit on the unit or place anything on it.

20. Before storing, the water must be drained from the unit and the filters cleaned.

PRODUCT DIAGRAM

FRONT

A. Control panel

B. Vertical air louvers

C. Air outlet

D. Horizontal air louvers

E. Casters

F. Cable (power cord and plug)

BACK

A. Hot air outlet grill

B. Lower air inlet grill

ACCESSORIES

Flexible exhaust hose with 2 adapters

• 3-piece set

• stretches from 14 1/4” to60 5/8”

(36cm to 150cm)

Window exhaust adapter

Adjustable window slider kit

• 3-piece set

• adjusts 33 1/2” to 62” (85cm to 157.5cm)

Drain tube

Drain pan

INSTALLATION

SELECTING THE LOCATION

Place the unit in a flatlocation where the air

outlets are not obstructed. Place the unit at

least 20” (50cm) away from awall or other

obstacle.

MOUNTING THE EXHAUST HOSE

Slide the square end of the exhaust duct over

the hot air outlet on the back of the unit.

The exhaust hose should be kept as short and

straight as possible. Prevent any sharp bends in

the exhaust hose, as this will trap hot exhaust

air.

The hot exhaust air can be vented through the

wall or out a window. If mounting in the wall, the

height of the hole should be 16 to 50 inches

(40cm to 130cm).

WINDOW KIT INSTALLATION

The window kit is designed to fit into most

standard vertical and horizontal windows, as well

as some sliding glass doors. However, it may be

necessary to modify someaspects of the

installation process for certain window types.

1. Open the window or sliding door and adjust

the length of the window kit to fit the

opening. If the window kit is not long

enough, connect the extra window kit panel

to fit the opening. Mark and cut down a

single panel of the window kit if necessary.

2. Place the window kit between the window

and the window frame as shown in the

images to the right. Close the window onto

the window kit to form a tight seal.

3. Attach the exhaust duct adapter to the

window kit. Tabs located on the adapter will

lock into place securing the adapter to the

window kit.

CONTROL PANEL AND MULTI-COLOR DISPLAY

CONTROL PANEL

FAN SPEED

SWING TIMER OFF

MODE

TIMER ON

ON/OFF

FAN SPEED

Button During the modes of cooling, heating and fanning, press this button to choose high, medium or low

fan speed. In dehumidifying mode, this button is inoperable.

SWING Button Press this button to oscillate the vertical louvers or to stop oscillation.

∨Button This button decreases the room temperature/timer hours.

∧Button This button increases the room temperature/timer hours.

Power Button Press this button to turnthe unit on or off.

MODE Button Press this button to select among the modes of auto, cooling, dehumidifying, fanning, or heating.

TIMER ON Buttom Press this button to turn the timer on.

TIMEROFF Bttom Press this button to turn the timer off.

MULTI-COLOR DISPLAY

A. Auto Mode

B. Cool Mode

C. Dehumidify Mode

D. Fan Mode

E. Heat Mode

F. Fan Speed (Low, High, Medium)

G. Temperature

H. Swing Mode

I. Sleep Mode

J. Clock and Timer

K. Timer On

L. Timer Off

M. Compressor is on

BCD

CONTROL PANEL FUNCTIONS

ON/OFF BUTTON

Starts or stops the unit.

MODE BUTTON

Press to select the operating mode:

Fan Mode

Air Conditioning Mode

Heating Mode

Dehumidifying Mode

Auto Mode

FAN BUTTON

Press to select the fan speed: High, Medium, and Low.

The fan speed can be visually distinguished by the number of the digital air segments (follow arrow

above) flow out from the windmill fan image on the multi-color display.

TEMPERATURE

When in cooling or heating mode, the desired temperature can be selected by pressing the ∧and ∨

buttons. The multi-color display flashes the temperature while it is being set. The multi-color display

shows the set temperature when it is not in temperature setting mode.

The multi-color display can show either Celsius or Fahrenheit. Press the ∧and ∨buttons

simultaneously to change the display from Celsius to Fahrenheit or vice versa.

TIMERTo set the auto start time, press the Timer on button until the multi-color display shows a flashing

“”. Press the ∧and ∨buttons to change the clock to the desired time for the unit to

automatically start. To set the auto stop time, press the Timer Off button and the multi-color display

will show a flashing “ ”. Press the ∧and ∨buttons to change the clock to the desired time

for the unit to automatically stop. The light will flash for 3 seconds to activate the timer you

programmed.

TIME DISPLAY

In the diagram above, the letter “J” points to the adjustable time display. To adjust the time, Press FAN,

SPEED and SWING together (at the same time), then press UP to adjust the hours, and press DOWN

to adjust the minutes.

SWING

To start horizontal oscillation, press the Swing button once. ‘ ’ icon will appear on the multi-color

display. To stop oscillation, press the Swing button again. Vertical air flow direction can be adjusted

manually.

BCD

OPERATION USING THE CONTROL PANEL

COOLING

1. Properly install the exhaust hoses.

2. Plug the power cord into a grounded outlet.

3. Turn on the unit by pressing the On/Off button on the control panel.

4. Press the Mode button until “ ” icon appears on the multi-color display.

5. Press the ∧or ∨buttons until the desired temperature appears on the multi-color

display. The temperature ranges from 61°F-88

°F(16

°C-31

°C).

6. Select the fan speed by pressing the Fan button.

NOTE: During hot days, the unit will cool off the room most efficiently by setting the temperature at the

lowest and the fan speed at the highest. Reducing the length of the exhaust hoses, insulating the exhaust

hoses, and keeping direct sunlight to a minimum will also improve the cooling efficiency.

DEHUMIDIFYING

1. Properly install the exhaust hoses.

2. Plug the power cord into a grounded outlet.

3. Turn on the unit by pressing the On/Off button on the control panel.

4. Press the Mode button until the “ ” icon appears on the multi-color display.

NOTE: The unit operates at low fan speed during dehumidifying. The unit cools the room slightly

during dehumidification.

Keep the windows and the doors closed to aid in the effectiveness of the unit in removing the moisture

from the room.

NOTE: The unit will not dehumidify when the room temperature is lower than 61°F.

FANNING

1. Plug the power cord into a grounded outlet.

2. Turn on the unit by pressing the On/Off button on the control panel.

3. Press the Mode button until “ ” icon appears on the multi-color display.

4. Select the fan speed by pressing the Fan button.

NOTE: When the unit is running on fan mode, the exhaust hoses are inoperative and are not required.

Inhaltsverzeichnis

Andere Hotpoint Klimaanlage Handbücher

Hotpoint

Hotpoint MAC155 Bedienungsanleitung

Hotpoint

Hotpoint AH12E07D Betriebsanleitung

Hotpoint

Hotpoint HTP05 Installationsanleitung

Hotpoint

Hotpoint KNS18 Montageanleitung

Hotpoint

Hotpoint KMS06 Montageanleitung

Hotpoint

Hotpoint KLA 18DA Montageanleitung

Hotpoint

Hotpoint KVM18 Series Montageanleitung

Hotpoint

Hotpoint KCD09L Montageanleitung

Hotpoint

Hotpoint HP21WC-Cooling Only Bedienungsanleitung

Hotpoint

Hotpoint KVS06 Montageanleitung

Hotpoint

Hotpoint KSL06L Montageanleitung

Hotpoint

Hotpoint KL913AM Bedienungsanleitung

Hotpoint

Hotpoint KES15 Installationsanleitung

Hotpoint

Hotpoint KED12 Installationsanleitung

Hotpoint

Hotpoint KX918DS Montageanleitung

Hotpoint

Hotpoint KCM10 Montageanleitung

Hotpoint

Hotpoint AH11E07D Betriebsanleitung

Hotpoint

Hotpoint AH11H07D Bedienungsanleitung

Hotpoint

Hotpoint HSV05 Betriebsanleitung

Hotpoint

Hotpoint AH11H09D/E Betriebsanleitung

Hotpoint

Hotpoint EWF073CM5WA Bedienungsanleitung

Hotpoint

Hotpoint KVS08 Bedienungsanleitung

Hotpoint

Hotpoint KT104 Montageanleitung

Hotpoint

Hotpoint KLA18DA Bedienungsanleitung

Beliebte Klimaanlage Handbücher anderer Marken

Panasonic

Panasonic CS-E12HKEW Bedienungsanleitung

nedis

nedis ACMB1WT7 Bedienungsanleitung

Daikin

Daikin FCFV50A Bedienungsanleitung

Fujitsu

Fujitsu Inverter ASBA30JFC Bedienungsanleitung

Toshiba

Toshiba RAS-M10SMUV-E Bedienungsanleitung

Daikin

Daikin FXLQ20MAVE Bedienungsanleitung

CIAT

CIAT Magister 2 Series Leitfaden

Bestron

Bestron AAC6000 Bedienungsanleitung

Frigidaire

Frigidaire FFRE0533S1E0 Bedienungsanleitung

Samsung

Samsung AS09HM3N Bedienungsanleitung

Frigidaire

Frigidaire CRA073PU11 Betriebsanleitung

Soleus Air

Soleus Air GB-PAC-08E4 Bedienungsanleitung

McQuay

McQuay MCK020A Bedienungsanleitung

Webasto

Webasto Frigo Top 25 DS Bedienungsanleitung

Frigidaire

Frigidaire FAZ12ES2A Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric MSC-GE20VB Bedienungsanleitung

Mitsubishi Electric

Mitsubishi Electric PLA-M100EA Bedienungsanleitung

Daikin

Daikin Split Sensira R32 Bedienungsanleitung