Hotpoint LTF11M121OUK Bedienungs- und Montageanleitung

Indesit Company UK Ltd

Service

Information

Hotpoint

Fully Integrated

DISHWASHER

withDisplayand

O3 Active Oxygen

Models Covered

LTF11M121OUK 82906

Using DEA700 power module.

5407758 Issue 2 Jan. 2014

SM003860 ~ C00303163

2 of 40

Service Manual UK

Indesit

Company

English

SAFETY NOTES & GENERAL SERVICING ADVICE

1. This manual is NOT intended as a comprehensive repair/maintenance guide to the appliance.

2. It should ONLY be used by suitably qualified persons having technical competence applicable product

knowledge and suitable tools and test equipment.

3. Servicing of electrical appliances must be undertaken with the appliance disconnected (unplugged)

from the electrical supply.

4. Servicing must be preceded by Earth Continuity, Earth Resistance and Insulation Resistance checks.

5. Personal safety precautions must be taken to protect against accidents caused by sharp edges on

metal and plastic parts.

6. After Servicing the appliance must be rechecked for Electrical Safety. In the case of appliances which

are connected to a water supply (i.e.: Washing Machines, Dishwashers & Food Centres etc.) checks

must be made for leaks from seals gaskets and pipe work and rectification carried out where

necessary.

7. It can be dangerous to attempt ‘DIY’ repairs / maintenance on complex equipment and the Company

recommends that any problem with the appliance is referred to its own Service Organisation.

8. Whilst the Company has endeavoured to ensure the accuracy of the data within this publication they

cannot hold themselves responsible for any inconvenience or loss occasioned by any error within.

INDEX

Safety Notes & General Servicing Advice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Production Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Model Matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

General Information and Console Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 - 7

Programme Guide & Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting the Water Hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Basic Machine Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Component Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 - 19

Auto Test Cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Fault Codes & Diagnostics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 - 25

Wiring Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Module Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 - 28

Servicing Notes & Dismantling Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29 - 34

General Dishwashing Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 - 38

3 of 40

Indesit Company

Service Manual UK English

TECHNICAL SPECIFICATIONS

Introduction Date 2013

Energy Class A++

Washing Class A

Drying Class A

Noise Level 41 dB.

Country of Origin EU

Dimensions Height Adjustable from 820 mm to 900 mm

Width 595 mm

Depth 570mm

Weight 43 kg

Capacity 14 place settings

Electrical Supply 230/240 Volts AC @ 50Hz

Energy Consumption 0.93kW/h

Water Consumption Standard Cycle: 9 litres

Drying Residual Heat Drying (Natural)

Controls DEA700

Tub Stainless Steel

Heater Flow through type with built in safety cut out and fuse

Heater Wattage 1.8 kW @ 230V AC

Heater Resistance 29.20Ω

Circulation Motor:

Type BLDC "Flexipower" Motor

Motor RPM Variable

Motor Power Consumption Variable

Detergent Dispenser Capacity 25g + 5g

Rinse Aid Dispenser Capacity 140ml

Fill Valve Resistance 3.72KΩ approx.

Water Pressure 0.56 bar (Max 10 bar)

Regeneration Valve 4.1KΩ approx.

Drain Pump BLAC variable speed

Power Consumption: "Left On" Consumption 5 Watts

"Off" mode Consumption 0.5 Watts

Thermistor Sump Mounted

Wash Programmes 11 Cycles

Wash Temperatures 45°C, 52°C, 48°C

Salt Refill Indicator Warning on Display

Rinse Aid Indicator Warning on Display

Furniture Door Height 720 mm maximum

4 of 40

Service Manual UK

Indesit

Company

English

MODEL MATRIX

LTF11M1120UK

Product Type User

Interface Programmes Interior Flexi-

power Energy Noise Features Market

Dishwasher Total

Integrated F = Digit

B = Basic

Knob

K = Knob

D = LCD

11 Medium

places

1 =

Yes

0 = No

1 = A+

2 = A++

3 =

A+++

1 =

41db

2 =

42db

9 =

49db

O = Active

Oxygen

7 = 7

Litres

C =

Cutlery

Tray

5 of 40

Indesit Company

Service Manual UK English

GENERAL INFORMATION

These models are integrated front loading dishwashers providing a choice of eleven wash

programmes to suit load requirements.

The programme selection button, On/Off switch and Programme Display and Option Buttons are

mounted along the top edge of the door panel.

The programmes are selected by depressing the programme selection button (P). The programme

can be cancelled at any time by holding down the On/Off button until the buzzer sounds three times

- resetting the programme.

The selected programme is indicated by a number displayed on the top edge of the door panel.

At the end of the programme the buzzer sounds twice and the selected programme flashes once a

second to indicate the end of the programme.

Water hardness is adjusted by the user before the machine is first used.

ECODESIGN REGULATION

The ECO wash cycle is the standard cycle to which the energy label data refers. It can be used to

wash crockery with a normal soil level and is the most efficient cycle in terms of energy and water

consumption for this type of crockery.

To reduce consumption even further, only run the dishwasher when it is full.

Standby consumption: Left-on mode consumption: 5 W - Off mode consumption: 0.5 W

Consumption data table for the main cycles:

*Cycle data refers to the values recorded in a laboratory in accordance with European standard EN 50242.

** Data is obtained by recording values when the appliance is operational and loaded with user crockery.

Standard conditions* User conditions**

Energy

consumption

(kWh/cycle)

Water

consumption

(litres/cycle)

Duration

(min/

cycle)

Energy

consumption

(kWh/cycle)

Water

consumption

(litres/cycle)

Duration

(min/cycle)

INTENSIVE 1,50 15 150 1,30 14 135

NORMAL 1,20 15 120 1,05 14 110

6 of 40

Service Manual UK

Indesit

Company

English

CONSOLE PANEL

ON-OFF / Reset Button

Press this button to switch the appliance on.

To Reset a programme hold down the On/Off Reset button until the machine emits 1 long beep.

ON-OFF Indicator Light

This light informs that the dishwasher is on.

Wash Cycle Selector (P) Button

Each time this button is pressed the number in the display will sequence through the available

programmes.

Display

Located on the top of the console, it displays the following information:

•The set programme number during a Cycle

•The programme number flashing at the end of the cycle indicates the cycle is complete.

•If the on/off indicator is flashing as well as a number in the display, this indicates a fault

code.

•Low Rinse Aid Warning.

•Low Salt Warning.

•Delayed Time

•Basket Selected

Delayed Start Button

The Programme can be delayed between 1 and 12 hours.

Not compatible with all cycles.

Every time the Delay start button is pressed the next period of delay is hi lighted until the desired

time is displayed.

Multi Function Tablet Button

Button LED on when selected.

Selected when the customer is using Multi-Function Tablets. The Programme profile is altered

to make full use of the tablet.

Select wash cycle button

Active Oxygen button

and indicator light

Extra dry button

and indicator light

Salt indicator light

Rinse aid indicator light

Multi-functional tablets

button and indicator light

Wash cycle number and

remaining time indicator light

Delayed start button

Zone Wash button

ON-OFF/Reset button

and indicator light

Zone Wash

indicator lights

Delayed start indicator light

7 of 40

Indesit Company

Service Manual UK English

ZONE WASHThis option allows for performing the wash cycle only on the selected rack. Select the

wash cycle, press the ZONE WASH button in a sequence: the selected rack lights up

and washing is activated only on the selected rack; press the button again to deselect

the option.

The option is available with the the following wash cycles:

Intensive and Normal.

Select the option and the wash cycle Intensive to activate the POWER ZONE wash cycle.

This wash cycle is a useful option for a soiled, mixed load, such as pans and saucepans, dishes

with burnt-on residues or crockery that are difficult to wash (grater, vegetable mill, very soiled

cutlery). The spraying pressure is reinforced and the washing temperature is increased to

guarantee the best washing on very soiled crockery.

Select the option and the wash cycle Normal to activate the GREEN ZONE wash cycle.

This function reduces the water and energy consumption. Excellent washing and drying results;

thee cycle time is extended.

Remember to load the crockery only on the selected rack.

EXTRA DRY BUTTON

Pressing the Button will turn on the LED.

The Final Rinse Temperature is increased and the Drying Phase is extended to improve Drying

Performance.

ACTIVE OXYGEN

This Option should be used between cycles when the Dishwasher is loaded with soiled crockery.

The Active Oxygen Option improves the hygienic conditions inside the dishwasher and controls

the onset of odours. The Option is available for 24 hours or until the Wash Cycle is started.

8 of 40

Service Manual UK

Indesit

Company

English

PROGRAMME CHART

** Quantity of pre-washing detergent.

Instructions on wash-cycle selection and

detergent dosage Wash cycle

Wash cycles

with

drying

Options

Approximate

duration of

wash cycles

Environmentally-friendly wash cycle with low energy

consumption levels, suitable for pans and dishes.

29 gr/ml + 6 gr/ml** – 1 Tab 1. Eco*Yes

Delayed start – Tabs –

Extra Dry 3:10’

Heavily soiled dishes and pans (not to be used for

delicate items).

35 gr/ml – 1 Tab 2. Auto Intensive

Yes

Delayed start – Tabs –

Extra Dry -

Zone wash 2:30’

Normally soiled pans and dishes. Standard daily wash

cycle.

29 gr/ml + 6 gr/ml** – 1 Tab 3. Auto Normal

Yes

Delayed start – Tabs –

Extra Dry – Zone wash 2:00’

Limited quantity of daily soiling

(4 place settings + 1 saucepan +1 frying pan).

25 gr/ml – 1 Tab 4. Auto Fast No Delayed start – Tabs 1:00’

Wash spread over the three*racks: normal in the upper

rack and third rack for cutlery and glasses, heavy-duty

in saucepans in the lower rack.

35 gr/ml – 1 Tab 5. Duo wash

Yes Delayed start – Tabs –

Extra Dry 2:00’

Economical and fast wash for delicate items which are

sensitive to high temperatures - run immediately after

use (glassware in the upper rack + fragile plates in the

lower rack).

35 gr/ml – 1 Tab 6. Delicates

Yes Delayed start – Tabs –

Extra Dry 1:40’

Economical and fast wash to be used for lightly soiled

dishes - run immediately after use (2 plates + 2 glasses

+ 4 pieces of cutlery + 1 saucepan + 1 small frying

pan).

25 gr/ml – 1 Tab 7. Express 30’

No Delayed start - Tabs 0:30’

This guarantees optimal performance, reduced

consumption levels and silent operation. It is ideal for

night-time operation of the appliance.

35 gr/ml – 1 Tab 8. Good Night

Yes Delayed start – Tabs –

Extra dry 3:30’

Pre-wash for dishes while awaiting completion of the

load with the dishes from the next meal.

No detergent 9. Soak

No Delayed start 0:12’

Disinfecting wash cycle suitable for washing bottles,

rings and teats together with plates, cups, glasses and

cutlery. The crockery should only be loaded on the

upper rack.

30 gr/ml - 1 Tab 10. Sanitizing

Yes Delayed start 1:20’

Disinfecting cycle for cleaning the inside of the

dishwasher, to be carried out only when the dishwasher

is EMPTY

dishwasher maintenance. 11. Self clean

No Delayed start 0:50’

9 of 40

Indesit Company

Service Manual UK English

SETTING THE WATER HARDNESS

These models have 5 Water Hardness Settings depending on the water supply where the machine

is located.

The Water Hardness Setting must be set:

- before the machine is used for the first time,

- if a new Module has been fitted or if the machine is moved to a different water area.

Use the above water hardness setting table to determine Water Hardness and do the following:

1. Switch on and off the dishwasher using the ON/OFF button.

2. Press and hold the P button for a few seconds until you hear a beep.

3. Switch on the dishwasher with the ON/OFF button, the set level appears on the display (the

water softening system is set by default to level 3).

4. Adjust the water hardness level with the P button, (1-2-3-4-5* see water hardness table) up to a

max. of 5 levels.

5. Press the ON/OFF button to save the adjustment setting.

Note: Even if using multi-functional tablets, the salt dispenser should still be filled.

RINSE AID ADJUSTMENT

The Rinse Aid Setting has to be Electronically set.

Starting condition:

Make certain the machine is Off at the Console but power is applied at the wall socket.

1. Switch the machine on (On/Off button)

2. Switch the machine off (On/Off button)

3. Press the Start/Pause Button 3 times

4. Switch the machine on (On/Off button)

5. Adjust the level of rinse aid using the knob

6. Confirm by switching the machine off (On/Off button)

Note: if the machine is not switched off by pressing the On/Off button, then at the end of a 10-

second Time Out theappliance will abort theprocedure automatically,withoutany change to the

previous rinse aid setting.

Select wash cycle button

Salt indicator light

Rinse aid indicator light

Water Hardness Setting

ON-OFF/Reset button

and indicator light

Water hardness setting table:

Display

No. Hardness

(Clarke)Notes

1 0 - 7 Salt not needed

2 7.7 - 14 Add Salt

3 14.7 - 21 Add Salt

4 21.7 - 42 Add Salt

5 42 - 63 Add Salt

10 of 40

Service Manual UK

Indesit

Company

English

BASIC MACHINE USE

Setting a Programme

1. Open the door and turn the machine On.

2. Press the P button, after each press, the display number will cycle to the next programme

number, until the desired Programme is shown.

3. Close the door, The machine will Start after about 10 seconds.

Cancelling a Programme in progress

1. Press and Hold the On/Off button until the machine beeps and the lamps all go out.

The programme is now cancelled.

End of Cycle

The Programme number will flash in the display when the final drying part of the programme is

completed.

Note: If the machine is silent and when the door is opened and the Programme Number is

permanently displayed, the cycle has not finished. Close the door and allow the programme

to continue. During the final part of the Drying Cycle the machine is paused.

On/Off Lamp Flashing

If the ON-OFF Lamp is flashing as well as a programme number the machine has a fault, see

Fault Codes and Diagnostics.

Adjusting the height of the upper rack

In order to make it easier to arrange the crockery, the upper rack may be moved to a higher or lower

position.

The height of the upper rack should be adjusted WHEN THE RACK IS EMPTY.

NEVER raise or lower the rack on one side only.

If the rack is equipped with a Lift-Up device* (see figure), lift it up by holding its sides. To restore the

lower position, press the levers (A) at the sides of the rack and follow the rack down.

Inhaltsverzeichnis

Andere Hotpoint Spülmaschine Handbücher

Hotpoint

Hotpoint HDA1100NWH - 24 Inch Full Console Dishwasher Benutzerhandbuch

Hotpoint

Hotpoint LSTB 6B00 Bedienungsanleitung

Hotpoint

Hotpoint FDUD 51110 ULTIMA Bedienungsanleitung

Hotpoint

Hotpoint HEFC 2B19 C UK Installations- und Betriebshandbuch

Hotpoint

Hotpoint LTB 6M126 Bedienungsanleitung

Hotpoint

Hotpoint FDUD 4411 Ultima Bedienungsanleitung

Hotpoint

Hotpoint SIUF 22111 ULTIMA Bedienungsanleitung

Hotpoint

Hotpoint HDA2100FWW Service-Handbuch

Hotpoint

Hotpoint HDA1000 series Bedienungsanleitung

Hotpoint

Hotpoint SIAL 11010 Aquarius Bedienungsanleitung

Hotpoint

Hotpoint HDA467K Montageanleitung

Hotpoint

Hotpoint LFS 114 Bedienungsanleitung

Hotpoint

Hotpoint HLD4000NWW - on 24 Inch Full Console... Bedienungsanleitung

Hotpoint

Hotpoint LBF 52 Bedienungsanleitung

Hotpoint

Hotpoint GSM1800NWW Montageanleitung

Hotpoint

Hotpoint HDA2130 Bedienungsanleitung

Hotpoint

Hotpoint LSB 5B019 Bedienungsanleitung

Hotpoint

Hotpoint FDF-780 Bedienungsanleitung

Hotpoint

Hotpoint LST 53977 Bedienungsanleitung

Hotpoint

Hotpoint 7885 Bedienungsanleitung

Hotpoint

Hotpoint LFT 114 Bedienungsanleitung

Hotpoint

Hotpoint DC23/24 Betriebsanleitung

Hotpoint

Hotpoint LFT 114 Bedienungsanleitung

Hotpoint

Hotpoint DWF30 Betriebsanleitung

Beliebte Spülmaschine Handbücher anderer Marken

Electrolux

Electrolux ESI5211LOX Bedienungsanleitung

KitchenAid

KitchenAid KUDB230B Bedienungsanleitung

Brandt

Brandt BDJ424DB Bedienungsanleitung

Asko

Asko DSD767UXXL.AU Bedienungsanleitung

Beko

Beko DFN26210W Bedienungsanleitung

NEFF

NEFF S153ITX00E Technisches Datenblatt

Midea

Midea SV 4.45 wi Bedienungsanleitung

LG LDF7932 Bedienungsanleitung

Gorenje

Gorenje GV63214 Bedienungsanleitung

Blomberg

Blomberg LDFN2240W Bedienungsanleitung

AEG

AEG FFB83836PM Bedienungsanleitung

Cylinda

Cylinda DM3220RFD Bedienungsanleitung

Atag

Atag DW8214MB Bedienungsanleitung

GE GLD8000 Series Bedienungsanleitung

Siemens

Siemens SN23HI02KE Technisches Datenblatt

Omega

Omega ODW717X Bedienungsanleitung

BORETTI

BORETTI BVW-683 Bedienungsanleitung

Siemens

Siemens SN 56N591 Bedienungsanleitung