Howard Miller 615010 Bedienungsanleitung

4- SHORT

SCREWS

HOWARD MILLER

MODEL 615010

ASSEMBLY INSTRUCTIONS

PARTS LIST:

8- LONG

SCREWS 1- CLOCK DIAL

ASSEMBLY

1- LARGE BASE RING

1- SMALL BASE RING

7. Hook the large curl of the third leg

around the small base ring.

4. Using the same procedure as in

steps 2 and 3, attach the second

leg, adjacent to the first leg.

5. Place the large base ring over the

outside of the legs, inside of the

small curls of the legs.

LARGE BASE RING

6. Place the small base ring inside of

the large curls of the two legs.

SMALL BASE RING

8. Lift the large base ring and slide

the small curl of the leg under the

ring.

9. Using a short screw attach the

third leg to the clock dial assembly.

1. Place the clock dial assembly

upside down on a soft clean

surface.

3. Using a short screw attach the leg

to the clock dial assembly.

2. Align the hole in the top (small curl

end) of of the legs with one of

the four holes in the outside ring of

the clock dial assembly.

one

ALIGN

HOLES

4- RUBBER

PADS

1- GLASS TOP

(NOT SHOWN)

4- LEGS

NOTE: Do not completely tighten screws until all parts have been assembled, step 13.

Do not push or lean on the back of the dial when assembling.

13.Tighten all 12 screws used to

attach the legs, clock dial

assembly, and base rings.

15.Place the glass top on the rubber

pads, centered on the base.

10.Use the same procedure in steps

7, 8, and 9 to attach the fourth leg.

11.Align the holes in large base ring

with the holes in the legs. Using

the long screws attach the ring to

the legs.

12.Align the holes in small base ring

with the holes in the legs. Using

the long screws attach the ring to

the legs.

Note: The holes in the ring may not align perfectly with the holes in the legs and you

may need to apply moderate force to the ring or leg in order to start the screws.

PD10063-R2

10/10

14.Turn the assembled base over so

that the dial is facing up. Attach

the rubber pads over the screw

holes in the outer ring of the base.

RUBBER PAD

Andere Howard Miller Uhr Handbücher

Howard Miller

Howard Miller 615096 Installationshandbuch

Howard Miller

Howard Miller 611274 Installationshandbuch

Howard Miller

Howard Miller 615114 Installationshandbuch

Howard Miller

Howard Miller 615088 Installationshandbuch

Howard Miller

Howard Miller 611319 Installationshandbuch

Howard Miller

Howard Miller 615100 Installationshandbuch

Howard Miller

Howard Miller 615-052 Bedienungsanleitung

Howard Miller

Howard Miller Seville Bedienungsanleitung

Howard Miller

Howard Miller 61123 Bedienungsanleitung

Howard Miller

Howard Miller WALL AND MANTEL CLOCK Bedienungsanleitung

Howard Miller

Howard Miller 615-069 Bedienungsanleitung

Howard Miller

Howard Miller BEDFORD PARK Installationshandbuch

Howard Miller

Howard Miller LEWISBURG Bedienungsanleitung

Howard Miller

Howard Miller 615116 Installationshandbuch

Howard Miller

Howard Miller MYDay 625-488 Bedienungsanleitung

Beliebte Uhr Handbücher anderer Marken

Silicon Laboratories

Silicon Laboratories SI5324 Bedienungsanleitung

Heathkit

Heathkit GC-1005 Bedienungsanleitung

Oregon Scientific

Oregon Scientific PRYSMA RMR221P Bedienungsanleitung

Andrew O'Malley

Andrew O'Malley DOTKLOK Bedienungsanleitung

ALGE-Timing

ALGE-Timing ASC3 Bedienungsanleitung

Bodet

Bodet Profil 960 Bedienungsanleitung

Nixie Clock

Nixie Clock Divergence Meter Bedienungsanleitung

La Crosse Technology

La Crosse Technology WS-8256-AL Bedienungsanleitung

Mini Gadgets

Mini Gadgets MCPro Bedienungsanleitung

Casio

Casio TMR-200 Bedienungsanleitung

Progetti

Progetti ILTEMPOSTRINGE Handbuch

BVItech

BVItech BV-101 Bedienungsanleitung

Progetti

Progetti KALIMERO Handbuch

La Crosse Technology

La Crosse Technology WT-3141b Handbuch

La Crosse Technology

La Crosse Technology W86531 Bedienungsanleitung

Sharp

Sharp SPC900 Bedienungsanleitung

La Crosse Technology

La Crosse Technology 404-50447 Bedienungsanleitung

Datexx

Datexx DF0063 Bedienungsanleitung