Hoyles Dado Panic Strip Installationshandbuch

Dado Panic Strip Additional Information

1.Installation

When installing dado panic strip the space between the edge of the aluminium channel and

the edge of the wall must be taken into consideration. If using a standard end as illustrated in

Figure 1.1, a minimum gap of 33mm must be left between the end of the aluminium channel

and the wall as in Figure 1.2.

If using a corner piece as in Figure 1.3, the minimum required gap between the aluminium

channel and the edge of the wall/corner are as follows;

•55mm for an external corner (Figure 1.4).

•70mm for an internal corner (Figure 1.5).

Figure 1.1: Panic strip with end cap.

33mm

Figure 1.2: Distance from aluminium

channel to wall for use with end cap.

Figure 1.3: Panic strip with Corner.

55m

Figure 1.4: External Corner.

70mm

Figure 1.5: Internal Corner.

2.Ordering

When the dado panic strip is delivered to site it cannot be altered in length, therefore it is of

vital importance to ensure the sizes are correct when placing the order, please measure from

corner to corner. To ensure the order is placed correctly please include a sketch of the area

the dado is required for as illustrated in Figure 2.1, a hand drawn sketch will suffice.

As well as the measurements, when

placing an order colour preference is

also required as is whether the strip is

to be illuminated or not.

Table 2.1 is a quick checklist of the

requirements to place an order.

Order Checklist

Measurements

Sketch

Dado Colour

LED Illumination

3.Fitting the switch

When fitting the dado panic strip, there are two grooves on the aluminium channel, these

denote the top and therefore should be facing upwards when attached to the wall.

Only when the channel is correctly orientated and attached to the wall can the switch be

inserted. The switch must be inserted under the upper lip of the aluminium channel then

pressed in at the bottom as shown on above.

If the switch is installed in any other manner, including pulling in from the side or forcing it

under the bottom lip first, it will suffer damage.

Figure 2.1. Sketch to order dado panic

strip.

Table 2.1

3496mm

2154mm 1127mm

Corner Piece Corner Piece

Corner Piece

Endcap

1301mm 1301mm

550mm

551mm

1499mm

INT Corner

EXT Corner

INT Corner

Andere Hoyles Sicherheitssystem Handbücher

Hoyles

Hoyles MAYDAY Bedienungsanleitung

Hoyles

Hoyles EXITGUARD Bedienungsanleitung

Hoyles

Hoyles A600WKITB Bedienungsanleitung

Hoyles

Hoyles EXITGUARD EX125iS-H Bedienungsanleitung

Hoyles

Hoyles EXITGUARD EX204 Bedienungsanleitung

Hoyles

Hoyles EXITGUARD EX125i Bedienungsanleitung

Hoyles

Hoyles EXITGUARD EX200 series Bedienungsanleitung

Beliebte Sicherheitssystem Handbücher anderer Marken

Inner Range

Inner Range Concept 2000 Bedienungsanleitung

Climax

Climax Mobile Lite R32 Montageanleitung

CADDX

CADDX NX-6 Bedienungsanleitung

FBII

FBII XL-31 Series Bedienungsanleitung

Johnson Controls

Johnson Controls PENN Connected PC10 Bedienungsanleitung

Aeotec

Aeotec Siren Gen5 Bedienungsanleitung

Blaupunkt

Blaupunkt SA 2700 Bedienungsanleitung

IDEAL

IDEAL Accenta Betriebsanleitung

AJAX

AJAX DoubleButton Bedienungsanleitung

Swann

Swann SW-P-MC2 Bedienungsanleitung

Ecolink

Ecolink Siren+Chime Bedienungsanleitung

Digital Monitoring Products

Digital Monitoring Products XR150 Bedienungsanleitung

EDM

EDM Solution 6+6 Wireless-AE Bedienungsanleitung

Highway Safety Group

Highway Safety Group EA401 Bedienungsanleitung

Siren

Siren LED GSM Bedienungsanleitung

Detection Systems

Detection Systems 7090i Montageanleitung

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Bedienungsanleitung

Siemens

Siemens FDM273 Bedienungsanleitung