HP A9891A Bedienungsanleitung

HP A9891A Smart Array 6404 Controller

Installation Guide

HP-UX, Open VMS

Manufacturing Part Number: A9891-96010

February 2007

United States

Legal Notices

The information in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this manual, including, but not limited to, the

implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be held

liable for errors contained herein or direct, indirect, special, incidental or consequential damages in

connection with the furnishing, performance, or use of this material.

Warranty

A copy of the specific warranty terms applicable to your Hewlett-Packard product and replacement parts can

be obtained from your local Sales and Service Office.

U.S. Government License

Proprietary computer software. Valid license from HP required for possession, use or copying. Consistent with

FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical

Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license.

adaptation, or translation of this document without prior written permission is prohibited, except as allowed

under the copyright laws.

Trademark Notices

UNIX

is a registered trademark in the United States and other countries, licensed exclusively through The

Open Group

Localized Documentation

This Installation Guide has been translated to:

http://www.docs.hp.com/ja/index.html

Contents

1. Smart Array 6404 Controller HP-UX Installation

Smart Array 6404 Controller Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Smart Array 6404 HP-UX Installation Prerequisites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Preparing for the Smart Array 6404 Controller Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Installing Smart Array 6404 Controller Hardware (Offline). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Installing Smart Array 6404 Controller Hardware (Online). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Smart Array 6404 HP-UX Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Locating Software for the Smart Array 6404 Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Installing Software for Smart Array 6404 Controller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Install the Software After HP-UX Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Verifying the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Setting up a Smart Array 6404 Controller As a Boot Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Array Configuration Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Offline Configuration of HP-UX 11i v1 Using Ignite-UX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Using ORCA (IA Platforms Only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2. Smart Array 6404 Controller OpenVMS Installation

Smart Array 6402 Controller Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Smart Array 6404 OpenVMS Installation Prerequisites. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Smart Array 6404 OpenVMS Quick Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Install Smart Array 6404 Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Smart Array 6404 OpenVMS Software Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Installing the Smart Array Controller to a System Running OpenVMS . . . . . . . . . . . . . . . . . . . . . . 22

Installing the Smart Array Controller as a Boot Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Using ORCA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

ORCA Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Configuring Your Logical Boot Drive. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Issues and Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Issues and Restrictions Awareness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

A. Declaration of Conformance

Contents

Chapter 1 5

1Smart Array 6404 Controller HP-UX

Installation

Smart Array 6404 Controller HP-UX Installation

Smart Array 6404 Controller Components

Chapter 1

Smart Array 6404 Controller Components

Figure 1-1 Smart Array 6404 Controller

NOTE Do not use both the internal and external connectors on one port simultaneously. The card will

not function if both connectors on one port are used.

Table 1-1 Controller Components

Item

ID Description

1 Internal SCSI connector, port A1*

2 Internal SCSI connector, port A2*

3 External SCSI connector, port A1*

4 External SCSI connector, port A2*

5 Controller battery

6 Battery-backed cache module

7 Connector for expansion board

Smart Array 6404 Controller HP-UX Installation

Smart Array 6404 HP-UX Installation Prerequisites

Chapter 1 7

Smart Array 6404 HP-UX Installation Prerequisites

Before installing the Smart Array 6404 controller, ensure that the following hardware and software

prerequisites are met:

•ChecktheRAID-01 (ciss) HP Smart Array Controller Driver Release Notes for your HP-UX version for

known problems or other information needed for installation. These documents are available in the

“Smart Array (RAID)” section of http://docs.hp.com/en/netcom.html.

• Confirm that the Smart Array 6404 controller and software are supported on the HP server with the

version of HP-UX that you are using; see the HP Smart Array RAID Controllers Support Matrix located in

the “Smart Array (RAID)” section of http://docs.hp.com/en/netcom.html for more information.

• Check the HP server’s documentation to determine if additional tools are required for component

installation at http://docs.hp.com.

• Check the HP server’s documentation for specific instructions on controller installation.

• Check your system hardware documentation to determine if OL* or OLAR are supported.

— For detailed instructions and information on using the OL* feature, see Interface Card OL* Support

Guide for 11i v2 or later.

— For detailed instructions and information on using the OLAR feature, see Configuring HP-UX for

Peripherals for 11i v1.

— For detailed information about slots in entry-level Integrity servers, see the I/O Slot Matrix - Entry

Level Integrity Servers in the System Administration section of http://docs.hp.com/en/hw.html.

— You can view, download, or print all documentation from http://docs.hp.com.

• Confirm that you have the Smart Array 6404 controller software bundle (RAID-01). This bundle is

included on CD or available on the web at http://www.software.hp.com.

• Confirm that HP-UX super-user privileges are available; they are necessary to complete the installation.

• Confirm that the /usr/bin, /usr/sbin, and /sbin directories are in your PATH by logging in as root and

using the echo $PATH command.

• Take note of the configuration of the system before adding/removing components.

For more information about the required operating system versions, see the RAID-01 (ciss) HP Smart Array

Controller Driver Release Notes.

Smart Array 6404 Controller HP-UX Installation

Preparing for the Smart Array 6404 Controller Installation

Chapter 1

Preparing for the Smart Array 6404 Controller Installation

WARNING Before installing a Smart Array 6404 Controller in a server, backup all data. This

step is mandatory if the disks were not previously configured on a Smart Array

Controller, because the data format will not be recognized and the existing data will

not be preserved.

CAUTION In systems using external data storage, be sure that the server is the first unit powered down

and the last unit to be powered back up. Doing this ensures that the system will not

erroneously mark the disk drives as FAILED.

WARNING To reduce the risk of personal injury or damage to the equipment, consult the safety

information and user documentation provided with your server before attempting

installation.

Many computers are capable of producing energy levels that are considered

hazardous. These computers are intended to be serviced by qualified personnel

trained to deal with those hazards. Do not remove enclosures or attempt to bypass

any interlocks that may be provided for the purpose of removing these hazardous

conditions.

CAUTION Electrostatic discharge (ESD) can damage electronic components. Be sure that you are properly

grounded before continuing the installation procedure.

The Smart Array Controllers contain electronic components that can easily be damaged by

small amounts of static electricity. To avoid damage, follow these guidelines:

• Store the controller in its antistatic plastic bag until you are ready to install it

• Work in a static-free area, if possible

• Handle the controller only by the edges. Do not touch electronic components or electrical

traces

• If you must lay the controller down, place it on a non-conductive mat or surface

Before beginning installation, and without removing the Smart Array Controller from its

antistatic bag, inspect the controller for any signs of obvious damage, such as chipped or loose

components. Contact HP if the controller is damaged.

Smart Array 6404 Controller HP-UX Installation

Installing Smart Array 6404 Controller Hardware (Offline)

Chapter 1 9

Installing Smart Array 6404 Controller Hardware (Offline)

Step 1. Power off the system.

• If the system is running, shut it down.

• Wait for the system to shut down completely, and then power off the system.

• Power off any peripheral devices that are attached to the server.

• Unplug the AC power cord(s) from the outlet, and then from the server and peripheral devices.

Step 2. Access the system controller bay.

• Open the system to gain access to the PCI backplane.

Step 3. Install the controller.

• Insert the controller into the fastest-performance PCI slot available. For detailed information

about slots in entry-level Integrity servers, see the I/O Slot Matrix - Entry Level Integrity

Servers in the System Administration section of http://docs.hp.com/en/hw.html.

• Slide the controller edge-connector into the PCI slot until it is fully seated.

• Secure the controller.

Step 4. Reassemble the system.

Step 5. Power on the system.

• Power on any peripheral devices that are attached to the server.

• Power on the system.

Installing Smart Array 6404 Controller Hardware (Online)

If your system has one or more slots that support OL* or OLAR — and you want to use OL* or OLAR to

install the controller in one of those slots — follow these steps:

Step 1. Confirm that the latest version of the ciss driver (Smart Array Controller software) is installed on

your system. See the “Verifying the Installation” section in the HP Smart Array 6400 Series

Controller Support Guide.

Step 2. Install the Smart Array Controller in your HP-UX system according to the procedure described in

the latest edition of the Interface Card OL* Support Guide for 11i v2 or later, or Configuring

HP-UX for Peripherals for 11i v1. These documents can be viewed or downloaded at

http://docs.hp.com, or a hard copy can be ordered from HP.

TIP To improve performance, install the Smart Array Controller in a PCI-X 133 MHz slot or

available PCI 4X slot.

NOTE See the HP Smart Array Controller Support Matrix, located in the “Smart Array (RAID)”

section of http://docs.hp.com/en/netcom.html, to find out if your server supports OL* or OLAR.

Smart Array 6404 Controller HP-UX Installation

Smart Array 6404 HP-UX Software Installation

Chapter 1

Smart Array 6404 HP-UX Software Installation

Locating Software for the Smart Array 6404 Controller

The driver, utilities and manpages for the Smart Array 6404 controller are located at the HP Software Depot.

• Go to http://www.software.hp.com

• Search for “A9891A”.

• Click Receive for Free.

• Select the HP-UX version that your system is running, and fill-out the customer information form. Then

click Next.

• In the “Documents” column next to the “Download Software” column, click on “Download/Installation

Instructions” for additional information.

• Click on the depot that corresponds with the OS you are running to download the driver, utilities and

manpages for the Smart Array Controllers.

NOTE HP recommends that you install the latest version of the Smart Array 6400 Series Controller

firmware. For current firmware recommendations, see the HP Smart Array RAID Controllers

Support Matrix. For instructions on how to obtain and install adapter firmware, see the HP

Smart Array 6400 Series Support Guide. These documents are available in the “Smart Array

(RAID)” section of http://docs.hp.com/en/netcom.html.

Installing Software for Smart Array 6404 Controller

The driver, utilities and manpages for the Smart Array 6404 Controller are contained in the RAID-01 bundle

located in the downloaded depot. They can be installed using the Software Distributor (SD). The SD is a tool

for installing software on HP-UX host systems; it can also be used to remove software from HP-UX host

systems.

The instructions for using the SD to install or remove the driver, utilities and manpages for the Smart Array

6404 Controller can be downloaded at http://software.hp.com.

The RAID-01 bundle is composed of several files that will be copied to the appropriate directories on the host

system. User space utilities can be viewed in the /opt/raidsa/bin directory.

Install the Software After HP-UX Installation

Here are the steps to load the Smart Array 6404 software, using the HP-UX swinstall program.

Step 1. Log on to the system as root.

Step 2. Insert the software media into the appropriate drive. If the software is being loaded from a

CD-ROM, go to step 3; otherwise, go to step 4. The software can also be located at

http://www.software.hp.com.

Inhaltsverzeichnis

Andere HP Controller Handbücher

HP A9890A - Smart Array 6402/128 RAID... Bedienungsanleitung

HP 30242 Handbuch

HP Smart Array P212 Bedienungsanleitung

HP StorageWorks HSG60 Bedienungsanleitung

HP VXI Pentium 75000 Series Bedienungsanleitung

HP MSM775 zl Bedienungsanleitung

HP ProCurve MSM760 Bedienungsanleitung

HP Smart Array P712m Gebrauchsanweisung

HP ProCurve MSM710 Bedienungsanleitung

HP ProCurve 800 Handbuch

HP ProCurve MSM765zl Bedienungsanleitung

HP D5970A - NetServer - LCII Bedienungsanleitung

HP MSA 2040 Leitfaden

HP 9000 Series 700 Bedienungsanleitung

HP HPE MR Gen11 Bedienungsanleitung

HP Compaq Presario,Presario 4400 Leitfaden

HP MSA 2040 Bedienungsanleitung

HP P Class 450/500/550/600/650/700/750 Bedienungsanleitung

HP Smart Array P800 Bedienungsanleitung

HP 3100ES - Smart Array RAID Controller Bedienungsanleitung

HP Smart Array P600 Bedienungsanleitung

HP HPE VAN SDN Controller 2.7 Service-Handbuch

HP StorageWorks 1510i - Modular Smart Array Bedienungsanleitung

HP MSM720 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch