HP f710 Bedienungsanleitung
f710
f710
f710
f710
f710
f710
f710
完整版產品使用者手冊請至
完整版產品用戶手冊請至
1
Caution
Use the authorized charger only.
Never disassemble or attempt repair of this product. Doing so may
damage the camcorder, cause electric shock and void your product
warranty.
Never short-circuit the battery.
Set up time and date accurately before you use this camcorder.
xposing the camcorder to open flames can cause explosion.
Due to local laws and vehicles safety considerations, do not manually
operate the camcorder while driving.
The values displayed in this system, such as speed, position, and the
distance warning to the speed camera set points, may be inaccurate
due to the influence of surrounding environment. They are for your
reference only.
Hewlett-Packard Company is NOT responsible for the loss of any
data/content during operation.
Before you start using the
C
ar Camcorder it is
assumed that you agree to the above statements.
2
1Introduction
Thank you for purchasing this advanced camcorder. This camcorder is
specifically designed for real time video and audio recording when
driving.
1.1 Features
•High Dynamic Range Imaging (HDR)
•Super HD 2304*1296
•Up to 150 Degree Wide Angle Glass Lens &IR-Filter
•Built-in G-sensor
•Motion Detection
•Collision Detection
•mergency Recording File
•Advanced Driver Assistance Systems (ADAS)
1.2 Package Contents
The package contains the following items. If there are any missing or
damaged items, contact your dealer immediately.
Car camcorder Hook+Band CD-ROM
Quick start guide Car adapter
3
1.3 Product Overview
4
No.
Item
1 Rearview mirror clip
2 Hook
3 Band
4 Display
5 Power on/off( )
6 Settings Menu and Delete button ( )
7 Microphone enable/ disable and Up navigation button.
( )
8 Record Stop/Start and Select button ( )
9 Press to turn LCD on or off. ( )
10 Mode Select ( )
11 xposure Value setting and Down navigation button ( )
12 MicroSD memory card port
13 Car power adapter and PC connection USB port
14 Reset
15 Lens
5
2Getting Started
2.1 Inserting the Memory Card
Insert the memory card with the gold contacts facing the back of the
camcorder. Push the memory card until it clicks into place. (Use class 6 or
greater speed micro SD cards for this camcorder; It is recommended to
format the micro SD cards before the initial use.)
To remove the memory card
Push the edge of the memory card inward until you hear/feel it click,
then allow it to push out until you can remove it from the slot.
Note:
1. Do not remove or insert the memory card when the camcorder is powered on. This may damage
the memory card.
2. It is recommended to use a 32 GB, Class 6 speed or above micro SD card.
3. It is recommended to format the micro SD cards before the initial use.
6
2.2 Insta ing in Vehic es
1. Chip on to your original car mirror.
2. Circle the clip with the band.
3. Adjust the camcorder lens.
2.3 Connecting to Power
Use only the supplied car adapter to power up the camcorder and charge
the built-in battery.
1. Connect one end of the car adapter to the USB connector of the
camcorder.
2. Plug the other end of the car charger to the cigarette lighter socket
of your vehicle. Once the vehicle engine is started, the camcorder
automatically powers on.
7
Note:
Please take note if the environment temperature reaches 45°C or above, the car adapter still can
supply power to camcorder, but it may not charge the battery. This is characteristic of Lithium
polymer battery and is not a malfunction.
2.4 Powering the Camcorder On / Off
2.4.1 Auto Power On/Off
Once the vehicle engine is started, the camcorder automatically powers
on. And the recording will automatically start.
Once the vehicle engine shuts down, the camcorder automatically saves
the recording and turns off the power within 10 seconds.
Note:
Automatic power up and shut down assumes the power socket is linked to the car ignition.
2.4.2 Manua Power On/Off
To manually turn on the power, press the POWER button.
To turn off, press and hold the POWER button for at least 2 seconds.
To reset, press and hold the RESET button on the back of the camcorder
for at least 5 seconds.
8
2.5 Initia Settings
2.5.1 Set the Date and Time
To set the correct date and time, do the following:
1. Press the button twice
to enter the OSD menu .
2. Press the
or button to
select Date / Time and press the
button.
3. Press the
or button to
adjust the value and press the
button to move to another
field.
4. Repeat step 3 until the date and time setting is complete.
5. Press the button to exit the Date/Time settings. Press the
button again to exit the settings menu and return to the live
view mode.
Note:
When the battery is depleted, you must reset the date/time before the function -automatic record is
started. If the user doesn't reset the date/time, the camcorder will give you an alert after one minute
and the automatic record will be started.
9
3Using the Camcorder
3.1 Recording Videos
3.1.1 Record videos whi e driving
When the vehicle engine starts up and the Automatic Record function is
enabled, the camcorder automatically turns on and starts recording.
Recording will automatically stop when the engine is switched off.
Or, press the button to stop recording manually.
Note:
With some vehicle models, the automatic power up and off feature of this car camcorder will not
function because the cigarette lighter/power socket is not linked to the ignition system.
To work around this issue, please do one of the following:
- Manually turn on or off the cigarette lighter/power socket if this is possible with your vehicle model.
- Manually plug in the power adapter into the socket to turn on the car camcorder and unplug from
the socket to turn off the car camcorder.
3.1.2 Emergency Recording
This Car Camcorder is equipped with a sensor that is designed to detect
collisions and automatically trigger the mergency Recording feature.
The mergency Recording icon will be displayed if this feature is
initiated as illustrated. The mergency Recording video will not be
overwritten via the normal loop recording function of this product.
To manually initiate the mergency
Recording feature, press the
button during the normal recording
function.
To stop the recording, press the
button.
Inhaltsverzeichnis
Sprachen:
Andere HP Dashcam Handbücher
HP
HP Compaq Presario,Presario F760 Bedienungsanleitung
HP
HP s970 Bedienungsanleitung
HP
HP f500c Bedienungsanleitung
HP
HP f550g Bedienungsanleitung
HP
HP f490w Bedienungsanleitung
HP
HP f800x Bedienungsanleitung
HP
HP f720 Bedienungsanleitung
HP
HP f330 Bedienungsanleitung
HP
HP f550g Bedienungsanleitung
HP
HP f300c Bedienungsanleitung
HP
HP U818 Series Bedienungsanleitung
HP
HP F300 Bedienungsanleitung
HP
HP f210 Bedienungsanleitung
HP
HP F885 Bedienungsanleitung
HP
HP f660x Bedienungsanleitung
HP
HP f650x Bedienungsanleitung
HP
HP f870g Bedienungsanleitung
HP
HP f520g Bedienungsanleitung
HP
HP Deskjet F310 Bedienungsanleitung
HP
HP f520 Bedienungsanleitung
